Soundweb London BLU-100 Effects Processor

Soundweb London BLU-100 has a high- performance, high flexibility , open- DSP processing architecture , scalable , cost-effective equipment.

Fixed input / output configuration structure

BLU-100 provides 12 fixed into eight input and output structures. Set by software, each input channel can provide phantom power and input gain channel can reach a maximum 48dB, 6dB is stepping in , without using a computer in a BLU-100 front panel LED visual display of each channel can channel phantom power status, signal clipping and other information.

Open processing structure

BLU-100 and the signal processing logic may be processed freely configured as needed. The path between the input and output signals can be freely customized according to user requirements , and signal processing and logic processing BLU-100 can be used by good processing module SoundwebLondon software has been designed .

BLU-100 signal processing is BLU016 BLU-80 and twice the signal processing capabilities .

Digital audio bus

BLU-100 with 48 low-latency , fault tolerant digital audio bus , using standard Cat5e network cable, can provide a transmission distance of 100 meters . Use fiber optic converters and singlemode fiber , can make the transmission distance between devices over 10 kilometers ( 6.2 miles ) . The 48 -channel digital audio bus can BLU-800, BLU-320, BLU-160, BLU-120, BLU-BOB in a 256 road BLU-LINK digital audio bus used , but it is designated as 1-48 road. Up to 60 BLU-LINK devices can share audio bus .

Configuration and Monitoring

Structure can be configured for BLU-100 through HiQnet ™ London Architect v3.0 or higher version of the software, control and monitoring. In this way , you can simply design and processing a large , Soundweb London family composition system with multiple models . Regardless of whether the system has a BLU-100, or with the BLU-100 BLU-BOB output interface box , or multiple BLU-100 or greater mixing system can be compiled in a complete design of the software .

External control

As with other types of Soundweb London devices, 12 logic inputs and 6 logic control output control allows easy BLU-100 compatible GPIO devices. The rear panel RS-232 port allows BLU-100 the perfect combination with third-party control devices can also be simple to control some third-party devices such as projectors, monitors , lighting control equipment. In addition to the sub- Tai network port used to configure the connection , control and monitoring can also be used in some third-party control systems use IP control protocol in .

Developing

BLU-100 is based on user feedback when used in combination with SoundwebLondon strong technical force and R & D out, and the flexibility of its perfect combination of functionality , so that it will become a truly market-leading products. BLU-100 is an extension of Soundweb London family of products , it 's available, so Soundweb London full range of products can solve more demanding system designed to provide more solutions for important projects.