Apile H3C type adjustable proximity sensor can help improve the operating rate of the equipment

Azbil Corporation, TOKYO: 6845, announced that the H3C type adjustable proximity sensor provides two outputs and allows the operator to check and configure the settings via the computer to improve efficiency. It helps reduce operator's configuration time and increase the operating rate of the device. The new sensor is released on March 4. Access sensors are used for machining and shipping processes such as switches, which outputs an on / off signal based on whether or not metal is detected in its induction zone. Traditional proximity sensors have only single output and fixed work points in the sensing area of ​​the output on / off signal. A function of a dual sensor within a device unit of the H3C type can be provided in the induction zone to correspond to the motion of the object (workpiece), each point can output an on / off signal. Therefore, a single H3C type can achieve a perception of four regions by combining the on / off operation logic of each output (four combinations of off / off, on / off, open / open / open). So far, some processes require two conventional proximity sensors, such as when automatically replacing the machine, you must use two sensors to detect if there is a machine tool and if the installation location is correct. The same effect can be achieved with a H3C type. Generally close to the sensor's sensing distance is only 1 to 10 mm, and a lot of work takes a lot of work to place the sensor to a stable and ideal location for proper detection. In addition, each operator sets a difference in the way the sensor will always have differences, which may result in lack of stability. The H3C-type configuration program allows the operator to easily set the appropriate sensor work point through the computer without considering the location of the sensor. This can quickly achieve stable sensing. The traditional approach sensor illuminates the LED indicator to display its running state, but because these sensors are typically installed inside the machine device, it is very difficult to view the running status when the device is running. Using the H3C type, the operator can monitor its status and the relative position of the operating point and workpiece on your computer. Characteristics 1. Use two outputs within one device unit, you can detect up to four regions 2. No operator takes a lot of time to adjust multiple sensors 3. Automatic configuration work point according to the motion of the workpiece 4. Even in the induction area can be set to open / off 5. Observe the sensing safety margin on the monitor screen of the private configuration program Monitor the working status during equipment Editor in charge: GT, read full text

Our other product:

Professional lightning protection system for Tower	Professional FM Radio Station Equipment Package	FMUSER FU-1000C 1000W FM Transmitter With USB Audio Input Interface
FMUSER 200W FM Radio Broadcasting Package	Hotel IPTV Solution	FMUSER FSN-1000T V5.0 1KW FM Radio Broadcast Transmitter