DMB 3G-SDI HD digital video and analog audio optical

DMB 3G-SDI HD digital video and analog audio optical DMB 3G-SDI HD digital video and analog audio optical terminal model: DMB-T / RS-FC-3G Product Features (1) Automatically recognize 3G / HD / SD-SDI / ASI input, no manual selection (2) analog audio 20bit Digital encoder (3) audio input port balancing / unbalance automatic conversion, ESD protection, use safer and reliable (4) complies with SMPTE424M, SMPTE292M, SMPTE259M, SMPTE297M, SMPTE305M, SMPTE310M standard (5) complies with DVB-ASI (EN50083-9 Standard (6) Automatically adapt to SDI 143M, 177M, 270M, 360M, 540M, 1483.5M, 1485M, 2970MBPS rate (7) input has an automatic cable equalization, can compensate for loss of cable transmission (8) LED lamp design is perfect, through LED Lights can make it easy to monitor equipment operating status (9) Lead-free environmental protection circuit board PCB design (10) PCB board adopts multi-layer design, stable circuit stable and reliable, signal transmission stable and reliable (11) All components include connector, use international famous manufacturers Product, reliable quality (12) using aluminum material housing design, beautiful, light weight (13) dual switching power supply design, voltage range wide, power system long-term reliable work technical indicator 3G / HD / SD-SDI HD digital video input channel Number 1 + 1 Loop Level. 1882.380MVP-P automatic cable equalization. 1882.80M (2970Mbps) (Belden1694A Cable). 1882.250M (270Mbps) (Belden1694A Cable). 1882.100M (1485MBPS) (Belden1694A Cable) reflected. 1882.10dB (2970MBPS) impedance 75Ω interface BNC3G / HD / SD-SDI HD digital video output channel number 2 level 800mvp-p ± 10% 3G-SDI rising / drop time. 1881.135ps @ 2970MbpsHD-SDI rising / fall time. 1881.270 PS @ 1485MBPSSDI Rising / fall time. 1881.0.6ns @ 270Mbps3G-SDI maximum jitter. 1881.0.0.2UIHD-SDI maximum jitter. 1881.0.2UI (134PS) @ 100KHz<1.0ui (673ps) @ 10 Hzsdi maximum jitter. 1881.0.2ui ( 740PS) @ 10Hz<0.2UI (740PS) @ 1kHz impedance 75Ω interface BNC simulation audio input channel number 2 channel frequency band width [email protected] maximum level 17.4VP-P (+ 18dBm) channel isolation. 1882.90db @ 1khz , >90db @ 20kHz resistor 600 ohm or high-resistance binder XLR card simulation audio output channel number 2 channel frequency band width [email protected] maximum level 17.4VP-P (+ 18DBM) signal to noise ratio. 1882.85dB ( Unared) Total harmonic distortion. 1881.0.90% channel isolation. 1882.90db @ 1khz, >90db @ 20kHz delay match 2 degree amplitude match ± 0.2dB resistance low blocking port XLR card physical parameter size (high X width x Deep, mm mm) 44 × 433 × 340 (mm) dual power supply 130-260VAC, 50 / 60Hz power consumption. 1881.10W relative temperature 0-50 degrees Celsius relative humidity 0-95% does not condensed LED status indicator power supply, light chain Road status, video audio state light link parameter fiber mode single mode fiber interface FC / PC fiber number 1 single mode transmission distance 0-40 km