Gas discharge tubes for lightning transmitting antenna

 

 

Gas discharge tube according to the choice of P transmitter power to choose. Select the appropriate "rated voltage" of the discharge tube is very important, the rated voltage is too high, would not achieve the role of lightning, not too low then the transmit power output; capacitor C using ceramic capacitors and multi-polar capacitor in series only, once the individual capacitor damage does not affect the transmitter power output. ,
     Installation of a lightning location is also very important. Formed by the gas discharge tube arrester in series with the output feeder (coaxial cable), the discharge tube one end of coaxial wire, other end of the coaxial cable shield (shielded cable network system ground). The following are usually equipped with a transmitting antenna and a matching network discharge ball. There is some lightning matching network design. Therefore, in order to effectively lightning, the lightning arrester should be installed in the nearest vicinity of the transmitter or transmitter output directly mounted arrester and then to the output cable, such as the end of the coaxial cable (the antenna on the front) installation of a lightning arrester, lightning protection is more effective good.

   Schedule is three transmitters equipped with gas discharge tubes.

please Click hereto get our dipole antenna
Author: Ho Yi
Schedule:
Medium-wave transmitter power

1KW

3KW

10KW
Discharge voltage

1000V

1500V

2500V
Capacitor C

10 223/2KV

please Click hereto get our dipole antenna

Our other product:

Professional lightning protection system for Tower	Professional FM Radio Station Equipment Package	FMUSER FU-1000C 1000W FM Transmitter With USB Audio Input Interface
FMUSER 200W FM Radio Broadcasting Package	Hotel IPTV Solution	FMUSER FSN-1000T V5.0 1KW FM Radio Broadcast Transmitter