In Xiaobian's view, the 360 N-series mobile phone can be said to have always been a cost-effective endorsement as his own responsibility. The previous N6 Pro is a very cost-effective model. This time 360N6, although used or the Snapdragon 660 This god U, but its 4GB + 64GB version of 1699 yuan is really cost-effective, plus built-in 5030mAh big batteries, not more suitable for practical party.
That's today, I will take a piece, I will directly continue to use the monsters to see if the internal workmanship is as strong as the appearance.
The first step in the disassembly is of course ... is not taking the card, but has a 360 N7.
Starting serious, the true first step is of course still taking out SIM Carto, avoiding damage when disassembling the body.
After the body, there are two fixed screws at the bottom, and after screwing, you can start the rear shell. Use the tools such as rocker slices along the screen assembly with the gap of the fuselage. It is necessary to be careful, tools to avoid Too deep into the fuselage, avoid pulling force quickly, because it is close to the edge of the edge to finish the cable line.
After opening, the cable is temporarily unable to break, so you need to be careful not to go to the cable. The metal rear cover has a significant processing trace corresponding to the battery position, which is also to squeeze a larger capacity battery in the 8.35mm thick body.
To disconnect fingerprint recognition BTB, you need to remove the fixed metal cover. Here 360 uses a long metal cover to cover all BTB above the battery, and the metal cover uses a plurality of screws to fix it. Unlined.
After complete removing the back cover, it can be seen that the general mobile phone is different, N7's sound cavity is fixed on the back cover, and it can be seen that the bottom small plate portion has a corresponding vacancy.
Remove the components on the motherboard, double the fixture with plastic material, and the surface of the fixed part also has a contact protrusion, and it can be seen after removal, and the double-time is actually two separate camera elements, directly above the fixture. And the contact connection of the back cover corresponds to linkage.
Afterwards, all connections on the motherboard, including the RF line, the rear double-time front camera, after disconnecting all connections, because the fixed screws of the motherboard have been removed, and the motherboard can be easily removed.
Observing the two sides of the main board, most of the components of the two sides are covered by the metal shield, and the surface of the J metal cover has auxiliary heat dissipation measures, and we have disassembled the shield that can be removed. Show the internal components. (The internal components have heat dissipation stickers, and wipe it before the shooting of the inscriptions on the elements.
Here, we played the main dismantling of the motherboard portion, and then turn to the lower part of the sub-plate portion, because the sound of the sound cavity has been removed, we can directly see the lower small board, the same first disconnected BTB and coaxial lines.
After disconnecting all connections, you can remove the small board, because the back surface is viscous fixation, you need to use the tool to be careful. Can the small board can be used or the vibration rotor, not followed up to update the vibration rotor and linear motor, but this is a cost consideration, it is fully understood that the back of the small board is not related. IC or capacitors, no need to show it.
Basically, add information related to the camera and battery. The battery typical capacity is 5030mAh, the rated capacity is 4920mAh, and the main battery model of the main long life is also tested. We also tested in the relevant evaluation of the N7, and the battery life is indeed strong.
In the end, I came to Zhang Quanjiafu, the dismantling process can be seen, there is no internal 360 N7 because the pressure of the own cost is too reduced, although the integration of the motherboard is general, but the measures of heat dissipation and workmanship are still in place, components The connection is basically BTB and electric shock, relatively reliable.
In the whole, 360 N7 has a significant weaknesses in the camera, and the performance of the remaining parts is good. In the same price, the Snapdragon 660 processor and large battery have both, for friends who don't love to take pictures, is a very good Choice.
Original address: https://www.eeboard.com/teardown/360-N7-5/
Search for the panel network, pay attention, daily update development board, intelligent hardware, open source hardware, activity and other information can make you master. Recommended attention!
[WeChat scanning picture can be directly paid]
Our other product:
