6N3 push 6P1 single-ended amplifier production ----- 6p1 Vacuum Tube Amplifier

Keywords: 6N3 push to make single-ended tube amp 6P1 Done with two power transistors 6P1 class A stereo output, the dual output power 2-3W. Since the working tube 6P1 pure class A, sweet sound, the actual volume of the left and right without distortion 15W transistor amplifier quite. With high sensitivity speakers, it is the main voice and light music, and its tone is not absolutely high-grade audio! Power transformer is removed from the red (twin 230,6.3,6.3) three outputs. I use the output transformer dawn old Yi cow! It can be changed with a small power transformer (5-10w). As follows: 6p1 class (6p14 / 6p15 etc.) small power output impedance bladder are about 5k ohms, the load impedance of the loudspeaker 4/8 ohms. Output transformer primary winding ratio of This calculates RS = 4one when q = 31, which is consistent with a transformer of 220 / 6.3 V. When Rs n = 22.3 = 8oum, consistent with the transformer 220 / 9v's. You can use this voltage ratio, power of 10w power transformer substitute. Because cattle have a DC output through! Core magnetically saturated with ease. Therefore, the output of power conversion transformer core to open cow, a method to change the original sheet is inserted after interleaving sheet E and I-slices are stacked together on the plug, two parts of the core layer of 0.2mm thick pad junction film used for a magnetic separator , inserts must be close, otherwise it will affect the sound quality.

Our other product:

Professional lightning protection system for Tower	Professional FM Radio Station Equipment Package	FMUSER FU-1000C 1000W FM Transmitter With USB Audio Input Interface
FMUSER 200W FM Radio Broadcasting Package	Hotel IPTV Solution	FMUSER FSN-1000T V5.0 1KW FM Radio Broadcast Transmitter