A & HGL2400-424 mixer
Allen & Heath GL2400-424 24 Road 4 Module Matrix Mixer GL2400 model is a compact, dual function, has left and right channels, single trip, 4 group, 6 auxiliary channels, 7 × 4 matrix Mixer. Its design specifications range from 16 to 40 channels, including 2 stereo channels. 16, 24, 32, 40 channel structure; left and right channel / primary channel output; 4 canonical video control groups; 6 auxiliary transmission channels, where each channel is equipped with a front / rear switching switch; 2 stereo channels, each The channel is ready to have a microphone and a two-stereo-row input; a 7x4 matrix; a unique dual function, the main amplifier and / or monitors listening, the single channel can be used for the left and right superposition, or the tunner speaker monitor channel; pass channel Direct output for recording; a matrix external input with level fine tuning and sharing input; stereo input channel can be independently assigned to left and right channels; the microphone input of the stereo channel can be connected to the matrix using the exchange jumper; 4 segments EQ, 2 segments 100Hz high-pass filter; independent phantom power supply and phase conversion switch; dedicated main output and stereo monitoring level meter; internal jumper cap, optional EQ pre-selection, direct output and other options all faders Silent, level meter and AFL; internal contact signal channels are available; 1KHz sinusoidal / pink noise generator; recorders can access left and right channels and listening channels; ear tunnel sockets and local listening outputs; · 26DBU balance XLR output circuit; 74DB preamplifier can accept a microphone or line input level as high as + 34dBU; ultra-low noise pre-mixing amplifier design; built-in power supply and with MPS12 reserve power socket (16 to 32 channel model) Use the RPS11 power supply to perform external power supply, and also provides RPS11 backup power outlet (40 channel model); 100mm dust-proof fader; screw mother fastening potentiometer type circuit board separation and installation process; supplied to add a sub-regulator SYS-LINK V2 mixer input link; 4-pin XLR lamp holder light-emitting diode light; technical parameter microphone input passage (with 48V phantom power supply) 14-way, 22, 30, 38, optional line input 4 channels (2 stereo) Main output 6 channels (including 4 group output) Fader channel 16, 24, 32, 40 optional auxiliary output 6 AUX master monitor output 2 (1 simulation stereo) headphones monitor 1 Working level channel 0dBU Dynamic margin + 20dBU Mixed -2DBU Dynamic Margin + 22DBU Main Output · 4DBU Maximum Output · 26DBU Microphone Front Amplifier Sensitivity - 60DBU to + 14DBU Frequency Response (20HZ-30KHz) Microphone Enter the main output + 0 / -0.5dB line input to main output · 0 / -0.5dB distortion total harmonic distortion + noise (microphone input + 40dB gain). 1881.0.004% Total harmonic distortion + noise (line input 0DB gain) <0 .006% crosstalk neighboring channel. 1881. -93dB mute shutdown. 1881. -94DB fader volume shutdown. 1881. -90 DB connection impedance microphone Enter 2K ohm circuit input · 10K ohm output. 1881.75 ohm equilibrium gain (each) +/- 15dB mono channel low frequency 80Hz capacity mono channel low intermediate frequency 35Hz-1 kHz q = 1.8 mono channel high multi-frequency 500Hz-15KHz Q = 1.8 Mono channel high frequency 12kkz capacity filter (mono input) conversion 100Hz physical size: GL2400-424 (A × B × C × D) 150 × 560 × 57 × 817 (unit: mm); 22kg
Our other product:
