Audio-Technica 2000Series Collar Tolerel Set (M

Audio-Technica 2000Series Copilated Motor Set (MT838iia Collar Trip + ATW- ATW-2000A Overall Systems Working frequency D band 656.125 to 678.500 MHz; E band 800.550 to 813.150 MHz; F band 854.900 to 864.900 MHz; G-band 722.125 to 744.500 MHz; I-band 484.125 to 506.625 MHz Modulation method FM FM Rated frequency bias ± 40 kHz Dynamic range (typ). 1882. 110 dB A- Weighted Total harmonic distortion. 1881. 1% (± 17.5 kHz frequently poorestate 1 kHz) Effective working distance is generally 100 meters (no interference) Working ambient temperature 41 ° F (5 ° C) ~ 113 ° F (45 ° C) Frequency response 100 Hz ~ 15 kHz (+1 dB, -3 dB) ATW-R2100A receiver Receive system two sets of independent tuner, diversity automatic selection Mirror frequency inhibition 60 dB is normal, 55 dB minimum Sensitivity 20 dBμV on signal to noise ratio 60DB (50Ω terminal) Maximum output level balance: +9 DBV (XLRM card farmers) Unbalanced: +4 DBV (6.3mm socket) Input attenuation 0 / -12 dB selection Antenna input BNC type, 50Ω 12V DC, 60mA per terminal, 60mA Power supply DC 12-18V, 500mA, power adapter Size 210.0mm x 44.0mm x 162.2mm (width x height x length) Weight 1.0 kg Standard two whip antennas, rack kits, power adapter ATW-T210A UNIPAK cartridge transmitter RF output power high output 30mW; low output 10MW (50Ω, switchable) Spiration emission cooperates with local standards Input terminal 4-pin with lock connector Contact 1: Ground, contact 2: Musical Input, contact 3: Microphone input, contact 4: Power supply bias Battery 1.5V AA 5 alkaline battery x 2 (not included) Battery power consumption / life high output 7 hours; low output 9 hours (depending on battery type) Size 66.0mm x 92.3mm x 22.5mm (width x height x length) Weight 81 grams Be MT838IIA:. All-direction directive microclimular capacitive microphone High integrated structures, clear and accurate radios, can be used in teaching, stage, television broadcasting and religious rituals. Small and unopened design, suitable for use in applications that require steady microphones. There is a collar with a clip and a metal mesh. MT838IIA features a high pass filter switch that reduces low frequency noise in the radio environment. MT838IIA can work with phantom power supply or battery power. Be MT838IIA technical indicator Component fixed charging backplane, electrostatic capacitive type Directive full direction pointing Frequency response 20 ~ 18,000 Hz Opening sensitivity-62dB (0.79mV) with 1V 1PA Impedance 1,800 ohms (radio unit) Power supply 1.5 ~ 10V DC (radio unit) Qualcomm filter 80 Hz, 12 db / octave Fantasy power supply 11 ~ 52V, consumption of current 2mA Battery 1.5V 5 battery Battery power consumption / life 2.0 mA / 1200 hours Switch off (only for battery), straight, high pass filtering Weight microphone: 7.7G power supply module: 81.2g Size microphone: 21.5 mm - length, 6.5 mm - diameter power supply module: 83.0 mm - high, 63.0 mm - width, 22.0 mm - thick Output terminal built-in three-pin XLRM card farm Wire 1.8 m - long, 2 mm - diameter, microphone fixed connection Standard tie clip; metal net anti-shield; protective bag; AT8531 power supply module