Can the screen be broken back? Galaxy S8 Global First Disassembly!

Galaxy S8 Global First Disassembly! The screen is broken, and the dismantling of the madness IFIXIT will take the Samsung Galaxy S8 to the first demolition, the first release of Galaxy S8 dismantling atlas. The first thing is still a specification, Galaxy S8 is equipped with a 5.8-inch display, resolution 2960 × 1440, equipped with Exynos 8895 or Snapdragon 835 processor, built-in 4GB memory and 64GB body storage space, providing 12 million pixel back camera, Support IP68 waterproof. USB TYPE-C interface and 3.5mm headphone interface are located at the bottom Fingerprint recognition is the back design, located on the right side of the camera The first is to separate the rear cover with a rocker Suction cup Due to the existence of the cable, dismantling must be careful First, the fingerprint recognition component is removed, fixed to the rear shell, connected to the motherboard Remove the border and the small motherboard at the bottom Battery double-sided adhesive fixation Capacity is 11.55WH Remove the motherboard The motherboard front: Red is Samsung's K3UH5H50MM-NGCJ 4GB memory, and the Snapdragon 835 is packaged together Orange is Toshiba THGBF7G9L4LBATR 64GB flash memory Yellow is Qualcomm WCD9341 audio chip Green is SkyWorks 78160-11 Power Amplifier Blue is an Avago Aferm-9066 RF front end module Dark blue is NXP 80T71 NFC controller The motherboard back: Red is MURATA KM6D28040 Wi-Fi Controller Orange is a QUALCOMM PM8998 power supply chip Yellow is a QUALCOMM WTR5975 RF chip Green is Avago Afer-9053 RF Front End Module Blue is IDT P9320S, use unknown Dark blue is Maxim Max77838 Companion PMIC power management chip Dismantle the whole family In the end, IFIXIT gives the fixed score of 4 points (the most easy to repair the full range of 10 points, 1 point is the most difficult). - Most parts are modular and convenient to replace - The battery can also be replaced, but the rear shell is not easy on the one hand, and the other side of the large number of double-sided adhesive is very annoying. - It is a glass panel before and after, and it is fragile, and it has also added dismantling difficulty. - Surface screen is not possible to replace the outer screen separately after the exterior screen. This article originally address: https://www.eeboard.com/teardown/galaxy-s8-31/

Our other product:

Professional lightning protection system for Tower	Professional FM Radio Station Equipment Package	FMUSER FU-1000C 1000W FM Transmitter With USB Audio Input Interface
FMUSER 200W FM Radio Broadcasting Package	Hotel IPTV Solution	FMUSER FSN-1000T V5.0 1KW FM Radio Broadcast Transmitter