CuPro-Cote Shield CuPro-Cote

CuPro-Cote is a sprayable, brush or curlive conductive metal material, using special formulations, anti-rust copper as a conductive agent, excellent performance in electric field and radio frequency shield. The RFI / EMI shield development initially used as a plastic electronic equipment, which can be used directly in structural foams such as acrylic acid, ABS, as well as solvent-sensitive materials such as polycarbonate and polystyrene. It can also be applied to other non-porous surfaces, including wall panels, wood and metals that are painted after paint. You can use a sprayer, brush or drum like a normal latex paint. Dilution with water, with 5 Ω / m2 per square surface resistivity at 1 MIL dry film thickness. Attenuation: from 1MHz to 1GHz More than 75dB. The coverage area is a gallon of 670 square feet / per ml thickness, if the efficiency is 100% (usually no gallon 400 feet, when using a drum) It can be used indoors or outdoors, but the paint must be painted as a protective layer. Voc: 1.0 ± 0.1 IBS / g (120 ± 12g / L), there is a slight ammonia gas, and it takes a good ventilation. An important note on conductive coatings and national electrical specifications: There is no content in NEC to discharge the wall with a conductive coating. However, since the product does not have a UL list, the relevant security check has "jurisdiction", which can require the homeowner to approve the electrical engineer to prove that the product can be safely connected to the electrical ground end. It is also possible to request a licensed electrician to perform a ground connection. If your usage needs to perform electrical inspection after installation, you can contact relevant agencies to avoid any accidents. Provide 4 sizes 292 - 5G 5 gallons (18.92L) 292 - G 1 gallon (3.78L) 292 - Q 1 quart (1.13L) 292 - 4oz 4 oz (0.118L) Application Tip: 1. Before turning on the container, make sure the preparation is completed 2. Preferently stirred before use 3. When spraying, the paint should be mixed continuously to maintain a sufficient thickness. 4. The fan of a large wind is dry or ventilated 5. With conditions, baking drying can be carried out 6. The material is electrically conductive, and the material is not allowed to enter the electrical equipment or open

Our other product:

Professional lightning protection system for Tower	Professional FM Radio Station Equipment Package	FMUSER FU-1000C 1000W FM Transmitter With USB Audio Input Interface
FMUSER 200W FM Radio Broadcasting Package	Hotel IPTV Solution	FMUSER FSN-1000T V5.0 1KW FM Radio Broadcast Transmitter