In 2013, the development of smartphones can be described in speed, and the popularity of mobile quad-core processors has even exceeded the PC side in a sense. But the mobile phone processor is different from the rapid development, the speed of the mobile phone camera pixel is indeed slowly, except for Nokia's 41 million pixel lens, other brands are generally targeted with 13 million pixels.
As the giant of the electronics industry, Sony is very high in audio and video, and even many products are in Sony Exmor photosensitive components. As a new new machine for Sony's new listing, of course, it is necessary to have different people. Xperia Z1 has an exclusive G lens built into Sony's currently created a new camera for digital cameras. Its imaging specifications can reach 20.7 million pixels, 1/2.3-inch large Exmor RS stacked structural sensors are also very good at capturing the rays of the scene, and the night shooting capacity is significantly improved. In addition to the camera, Xperia Z1 has a lot of upgrades in hardware. I believe that there are also many netizens who want to see the internal construction of this smart flagship. What is the GTE? What is the overall workman? Don't worry, let's uncover the mystery of Xperia Z1 inside the Xperia Z1.
According to the practice, let go of the overall shape of the mobile phone before disassembling, so that you will not be dismantled into a part. In fact, for Xperia Z1, the overall shape design and Xperia Z are similar. It also uses a 5-inch 1080P level (1920 × 1080 pixel) display, along with the current Xperia series main design, 8.7 mm fuselage is slightly thicker than Xperia Z.
It seems that Sony has already used the idea of the three defense to all launched flagship products, starting from Xperia Z to the current Z1, none is not using three defenses. This XPeria Z1 has reached the professional level of IP55 / 58, not only to dust dust and support the highest level 8 waterproof, which can make a job such as recording under water than 1 meter deep.
For Xperia Z1, one of the biggest highlights is this G lens, which has 20.7 million pixels, 1/2.3 inch large Exmor RS stacked structural sensors, also guarantees its night shot. Ok, I read this mobile phone appearance, and the demolition of Xperia Z1 below is officially started.
Like the in-the-generation flagship products, the first step of the disassembly of Xperia Z1 is also starting from the back cover. Since Sony Xperia Z1 is a three-proof mobile phone, the overall design is very close, and most of the rear cover is bonded to adopt the rubber paper, although it will be a little hard, but believe that the so-called strong miracle, slow work Strong is king.
After opening the back cover, we can see the battery and motherboard of Xperia Z1. A careful friend may have seen it, and Xperia Z1 has a total of 9 screws.
The figure shows the back rear cover of Xperia Z1. Its design and frontpiece are as follows, and the top two metal contacts are used for NFC functionality.
The Xperia Z1 is internally constructed, and that iconic yellow tape is still used in fixed batteries. And the motherboard part we can only see the chip shield.
Xperia Z1 chip shield and G lens in the upper left corner.
Next, what we have to do is to unlined the nine screws. These 9 screws are designed with a hexagon screw hole, which requires a dedicated screwdriver to unscrew.
Figure is a screwed 9 screws.
After the 9 screws are unscrewed, the author found that the medium shell used in fixed is not moving. After some "gentle touch", the author took this middle shell, and the adhesive paper on the middle shell is very good. When dismantling, be patient and careful.
Removed middle shell close-up.
As a convention for dismantling the phone, the first time cutting power is a must work. After we take the middle shell, you can remove the battery of the Xperia Z1.
As we can see from the figure, the battery capacity is 3000mAh.
Compared with the previous generation of products, Xperia Z1 is very good. Large area cable design also reduces the chance of accidental injury, such design is very intimate.
The possible friends have already discovered that the Xperia Z1 has two radio frequency lines, respectively on the left and right side of the battery, so that Xperia Z1 will have more stable mobile signals.
The following work is to take all the parts that can be removed. First we disconnected the cable all over the connection, you can try to remove the parts. First, take the bottom of the small panel. In general, the bottom panel is generally a component such as connecting speakers, of course, Xperia Z1 is no exception.
The picture is taken down, it can be said that this Sony poured a lot of hearts on this lens. The lens size is larger than the general mobile phone.
As a core part of a mobile phone, the main board is the quality of the mobile phone, so each manufacturer has to pursue excellence in the motherboard workmanship. The picture shows the back of the motherboard of Xperia Z1, that is, we just open the back cover, which can be seen directly, it uses the currently popular double-sided board design, high integration motherboard display Sony powerful production process.
The picture shows the front photo of the Xperia Z1 motherboard. From the motherboard we can see a lot of familiar faces, including the Mirco USB interface, Mirco SD card slot, Mirco SIM card slot, and front camera.
Of course, in order to understand the chip information of Xperia Z1, we need to remove all the shields on the motherboard, although there is nothing too simple, but still remembering the action to be gentle, to prepare for the restore work in advance.
The figure shows the front surface of the motherboard that removes the shield.
Remove the back view of the motherboard of the shield.
Since we have already opened all the shields, let's explain in detail the chip information on the motherboard. First, start with the most important CPU of Xperia Z1. It seems that many manufacturers have put CPUs and running memory together. In the figure, we can only see a capacity 2GB SK Hercules H9ccnnbPTARLANTH 327A running memory chip, 2.2GHz Qualcomm Snapdragon 800 processor will be encapsulated with this chip Together.
The figure shows Samsung 310 KLMAG2GEAC-B001 memory chip with a capacity of 16GB.
This picture is a close-up of SKY77629 signal power amplifier.
IC chip close-up of model PM8841.
The figure shows the high-pass PM8941 power management chip.
Since the front camera of Xperia Z1 is closely fitted with the motherboard, the author did not take it down. The picture shows the close-up of the front lens.
The figure shows the Mirco USB interface and the mirco SD card slot on the motherboard.
The figure is the Mirco SIM card slot of Xperia Z1.
After removing all the motherboards, there are still some components that are cured above on the screen panel.
Figure shows the handset closeup of Xperia Z1.
Continued XL39H tradition, the side of Xperia Z1 also has an interface that can be used for wireless charging.
The picture shows the interfaces reserved by Xperia Z1 for the Mirco SD and Mirco USB.
The picture shows the MIRCO SIM card interface of Xperia Z1.
The power button and volume key of the Xperia Z1 are very close, which is also very suitable for one-hand manipulation.
The addition of the independent shutter button also allows the original three-defense XPeria Z1 to achieve underwater photography.
Xperia Z1 dismantles the family portrait.
The full text summary: Although Xperia Z1 is a three-proof mobile phone, it is not too much difficult to dismantle, which is very conducive to future repairs. However, considering the three-way performance in the future, Sony Xperia Z1 recovered but a little hard, because some brute force needs to be dismantled, and some adhesive paper or no stickiness is still, or have been damaged, in short If you still want to restore the three defense performances, I am afraid I need to re-seal a new circle.
Our other product:
