When the glory of the glory of 20s in September 19, finally released a thousand-headed machines sold by Gorit Play3.999, without fingerprint unlocking, and only 720p screens, the unicorn 710F processor. The only highlight of the whole machine is only 48 million pixel main photos and punching screens, causing a wave of controversy, as a glory line, Play 3 is really so unbearable?
The purchase storage is configured to: 4GB RAM + 64GB ROM, and the analysis data is subject to purchase disassembly devices.
E analysis
The dismantling of thousands of machines will not be too complicated, but the components are part of it. In 778 components in glory Play 3, China provides devices, and ICs, screens, non-electronic devices, and camera modules, which have become the highest in cost.
778 components, the expected material cost is about $ 125.5. China provides 132 components, accounting for 17%, costs 64.9%. In the component TOP 5, it can be apparent from the edge.
It can be seen that it is the main control IC part. In total cost, 56.6% is the master IC. Where are these ICs are placed on the motherboard?
The main IC of the motherboard (below):
1: AKM-AK ***** - Compass chip
2: Ti- BQ ***** - Fast charge chip
3: hisilicon-hi **** - power management chip
4: hisilicon-hi ***** - Wi-Fi, Bluetooth, GPS, FM and infrared transmission 5 in 1 integrated chip
5: SK HYNIX-H9 ****** - 4GB memory chip
6: hisilicon-hi6260-unicorn 710F eight-core processor chip
7: stmicroelectronics- li **** - Acceleration sensor chip
The main IC on the back of the motherboard (below):
1: SK HYNIX-H26M7 **** CMR-64GB flash chip
2: hisilicon- hi **** - Power Management Chip
3: hisilicon-hi **** - RF transceiver chip
4: Airoha- AP **** - RF front end module chip
This is certainly not all the master ICs, and more information, please go to the Ewistech search, there will be HD pictures. Subsequently dismantled the glory of Play3 to understand the internal structure.
Dismantle
Glory Play3 uses a side calorker, and the front side of the plastic calorium has an identifier to prevent insertion, and has a rubber ring for fastening and dust.
The flexible material rear cover is fixed with a black adhesive, but the viscosity is not strong, and the rear cover is heated with the electric blowing. There is a bubble pad and graphite heat dissipation material on the back cover. The whole machine is a common three-stage layout.
Remove the motherboard guard cover and integrated audio cavity single speaker extension module, the sound hole position has a dustproof net and foam material. The earphone holes and USB interfaces on the sub-board under the phone are equipped with a black dust jacket.
The rear shield protective cover is fixed to the motherboard. The rear three-piece is three independent modules, and there is a conductive tap on the back of the front camera.
The 3900 millian battery is provided by Shenzhen Xinwangda production, and the battery model is: HB406689ECW. The battery is ATL. The whole battery is secured with a layer of double-sided viscous film. The film is equipped with a removable handle to facilitate the replacement of the battery.
There is a thermally conductive silicone between the motherboard shield and the middle frame, and the corresponding position of the card slot also has a layer of graphite material, and the main sub-plate is connected to a coaxial connection between the main panel and a coaxial connection.
The main panel FPC soft board, the right button soft plate and the vibrator are fixed with double-sided adhesive, and the coaxial is inlaid in the middle frame side groove.
The screen is secured between the black adhesive and the middle frame, and the upper frame is attached to the graphite heat-cooling film, the lower attachment of the foam material and and a small amount of graphite cooling film. 6.39 inches of IPS tubing full screen. The supplier is the main side of Jingdong, the model is: BS064X6M-L00.
Overall, glory Play3 machine is designed in rules, and the dismantling is simple. The internal use of conventional three-stage layout is assembled, and the rear three-time use independent design, which brings convenience to the post-maintenance, and also reduces maintenance costs. But internal protective cover materials are too fragile.
EWiStech is the leading electronic dismantling database query and analysis service platform, and has studied the data collected by the dismantling analysis of thousands of equipment, and studied various equipment in the field of consumer electronics.
The EWiStech searches include IC, PCB / FPC, antenna, battery, connector, display, camera, etc., providing data queries and comprehensive in-depth analysis services for global users.
There is also a hot and interesting equipment in Ewistech ...
Huawei - Enjoy 10S
Realme - RealMe X50 5G
Huawei - NOVA 5Z
Reprinted from ewistech.
Our other product:
