Yesterday, the glory X series has just contributed to the latest glory X10 max, a 7-inch big mobile phone. Today, Ewistech's glory 9X is also analyzed. This is a lifting camera mobile phone released last year, with a minimum price of 1399 yuan (4GB + 64GB). What is it within it?
PS: EWISETECH This time you start with 6GB + 64GB configuration. The analysis data is subject to the purchase of disassembly equipment.
Let's take a look at IC information on the motherboard.
The main IC of the motherboard (below):
1: hisilicon-hi6280-unicorn 810 processor
2: SK HYNIX- H9HCNNNECMML-6GB memory
3: hisilicon-hi ****** - WiFi / BT / GPS / FM RIDEO chip
4: hisilicon-hi **** - Power Management Chip
5: hisilicon-hi **** - RF transceiver chip
6: AKM-AK ***** - Electronic compass
7: AKM-AK ***** - Hall device
The main IC on the back of the motherboard (below):
1: Samsung-KlucG2k1ea-64GB flash memory
2: hisilicon-hi **** - power amplifier
3: hisilicon-hi **** - power management chip
4: stmicroelectronics-lsm **** - gyroscope + accelerometer
5: Goertek-Microphone
Five sensors found in the whole machine:
The main chips in the whole machine are the Hay Si Kirin's own chip, including the processor is also Haisi Qilin 810, which is good to control the cost from the one hand. Of course, more information, ewistech searches waiting for you to see.
Let's take a look at the internal structure of this phone from dismantling.
First remove the calorie, SIM calork has a silicone sleeve for dust. The rear cover of the glass material is fixed by the glue, and it is necessary to heat it, and there is a large-scale graphite sheet and the buffered bubbles on the back cover.
The motherboard cover, the sub-plate cover and the speaker module are fixed by screws, and there is a definition tag on the screw.
After removing the motherboard cover, you can see the upgrade camera device, the figure below shows the front camera module extended and the image of the unstretched. When the front camera module is extended, the camera soft board will be moved together.
The battery is fixed through the easy pull handle.
After removing the motherboard, you can remove the camera module, and find a graphite sheet after the back of the back main photo. The heat sink silicone is also applied at the motherboard processor location.
After the shield is removed, it is found that the chip is also applied not only to the shield, but also the heat dissipation silicone.
USB TYPE-C and earphone holes include a black silicone sleeve in the light sensor position.
The handset and the vibrator are fixed by a glue, while the soft plate of the side bond portion is fixed by a screw. Side key modules and fingerprint recognition modules are separate two modules.
The front camera module and step motor module can be removed together. The stepper motor module uses the AAC. Since the lifting camera module is easy to enter the water, a waterproof label is placed next to the front camera module for detecting water.
Since it is a lifting camera, the front camera module is fixed within the module. There is a protective glass on the module, and the module has a red silicone sleeve to secure the camera.
Finally, the inner support module is attached to the front surface of the inner support module.
The information of each module is clearer separately.
The screen uses a TFT screen with a group of 6.59 inches, with a resolution of 2340x1080 resolution.
A 3900mAH lithium polymer battery is selected. The cell vendor is ATL.
The front 16 million pixel camera, F / 2.2 aperture.
The rear 48 million main photos + 2 million vision depth camera, the main photo adopts Sony IMX582 1/2 "CMOS sensor.
Summary information
The whole machine uses three-stage design, secured through 27 screws, and the design is rigorous. Demolition labels and waterproof labels are available. The whole machine mainly passes through graphite sheets, and the heat-conductive silicone is used inside and outside the CPU shield.
Glory 9x internal main chips include radio-frequency chips to use Haisi chip. The LCD screen + side fingerprint recognition scheme is used to compare the OLED screen + screen optical fingerprint identification scheme or low. (: JUDY)
Glory and Huawei equipment can be searched in Ewistech.
Huawei - P40
Honor - Play4T
Reprinted from ewistech.
Our other product:
