E dismantles, love board network and Ewistech honor, take you to the world that smart electron dismantles. Knowing, knowing that it is, smart phone, intelligent wear, smart home is uncharacted! Want to see the professional dismantling analysis of the latest coolest products? Want to keep up with the latest technology pulse and market trend? Decomposition in e.
At present, the smart bracelet smart wristband brand is large. The price is high, the design is also very different, but it is very different, nothing more than a step, sleep monitoring, or accompanying display time, sedentary reminder, etc. . Among them, Misfit Shine is a wearable device with a higher user-recognized degree. In this week, we experienced SHINE, and finally dismantled it, the following shared the SHINE found in the use and dismantling. Special place.
We bought the national bank version of SHINE, the package contains SHINE detector, a bracelet, a clip, a button battery and a battery replacement tool. Among them, bracelets and clips can wear the detector on the wrist or sandwiched according to different needs.
Match the bracelet.
Match the clip.
Appearance, the metal housing used in the SHINE detector, matte, fine texture, small and exquisite. I haven't worn it when I was a wrist.
Pull the lens to the macro, see 12 LED points on SHINE, each point, in fact, is consisting of very small holes, is said to be 128.
The way the bracelet and mobile phone pairing also looks more cool, close to the phone, and the waves are displayed on the screen.
SHINE driver is implemented by a button battery, CR 2032 3V. The official website claims that the battery life is 6 months. Since the detector needs to be opened, the battery is replaced, and the SHINE has a small groove, and the gain is opened with a small tool similar to a mobile SIM pin. Open is still relatively easy, we repeatedly opened multiple times because of the experience, and the last SHINE groove has a painted phenomenon. (Next)
In fact, you can see the small world in Shine when replacing the battery.
On the enclosure that opens, we start the dismantling mode and remove the button battery.
Two-half ring we mark A, B, buttons are placed in A. The dismantling first starts from A, it looks simple, a black seal ring, a sticker and shell, it seems to be so much?
The plastic seal ring is attached to the inner wall of the housing by hot melt.
Tear off the sticker, you can see the sticker, that is, the outer casing is embedded in the middle of the outer casing, and the magnet is printed with n-like, representing the N pole (Northern Pleet) of the magnet, there is a very small one next to the circular magnet. The magnet, a small magnet, a black, and we remove the test, it is found that the end of the black this is the S pole (Antarctic), and the EWiStech engineer speculates that the circular square two magnets should make the magnetic line to be divergently and can enhance the magnetic force. The role of the magnet is very simple. On the one hand, it can be firmly attached to the button battery, so even if the user is relatively large, Shine does not take power, on the other hand, the clips inside the accessories, more wearing method.
Both magnets were pasted on the A shell, coupled with the suction of the magnet and metal shell, and attached very strong. (Next)
Returning to see the outer side of the A shell, in addition to the main manufacturer logo, you can also see a black plastic part above, the treatment of the injection mold in the back of the iPhone 6 is similar, and the radio frequency signal cannot penetrate the metal, so it needs injection molding In order to transmit the Bluetooth signal of the data can pass. The injection molding here affected the overall and beautifulness of SHINE appearance, so this is not seen on the wrist when SHINE is worn.
The A shell is separated to the B shell, and it should be a PCB plate in the B shell at a glance.
Open the PCB board, there are not many ICs on the board. It is more conspicuous. 12 yellow LED lights in the PCB, and 12 rounds corresponding to the B case, each dot is closed, realistic Light, waterproof, dustproof. The B shell is attached to a circular bubble.
The motherboard has a plastic ring outside.
There are not many ICs on the board, mainly a CC2541 Bluetooth chip from Ti, a Silicon Labs EFM32, 32-bit MCU and a three-axis acceleration from ST-intensive semiconductor in a wearable device. Sensor, this sensor is responsible for SHINE's step and sleep monitoring.
Another side of the motherboard, stickers, battery positive contacts, and ground contacts, and a ceramic antenna, responsible for the transmission of Bluetooth signals.
After the motherboard is dismantled, we put the battery and the LED can also illuminate.
SHINE family blessed, small and compact, her appearance is relatively discussion, and the internal components are more refined.
summary:
SHINE dismantling is not difficult, even if we are demolished, you can still install it back to continue, this is very different from the unpleasant dismantling of the bracem that we have removed in front. Since SHINE is not integrated, it is necessary to use the loop or clips. It is also relatively lightweight. Some users will be lost in the case, and the success rate of double-clicking on the SHINE switching state is not particularly high, visible, Shine is still not Perfect, but the delicate appearance and internal construction can be seen, you can see many of the manufacturer.
EwiseTech is a high-tech Internet company dedicated to electronic product analysis, providing a global customer with a deep hardware analysis of electronic mobile terminals and emerging technologies, including mobile phones, tablets, and wearable devices, and full-hardware and software test services. For more information and dismantling analysis, please visit www.ewistech.com.
Our other product:
