Overview
EME GUARD Wide Field Meritor (Strong Monitor) With the rapid development of the fifth-generation communication technology (5G), 5G is gradually going to commercial, and the risk of electromagnetic fields that may be generated around the electronic device will become more complicated, which is electromagnetic radiation. Environmental safety testing has put forward higher requirements. EME GUARD Wide Field Strong is a portable alarm integrated high-frequency electromagnetic radiation detector designed for modern increasing electromagnetic environments for detection, monitoring and recording environmental electromagnetic radiation (EMF). It is equipped with a three-axis sensor probe after calibration optimization, ensuring that the results of the measurement have a large degree of isotropic. Xiao Qiao fails to design, simple and clear, automatic test, can monitor all-weather monitoring in regional environments.
EME GUARD Wide Flow Electromagnetic Radiation Monitor is ideal for outdoor on-site 24/7 monitoring, boot automatic measurement, self-configuring alarm limit, 25%, 50%, 75%, 100% limited value for 4LED lights. The wide frequency field strong instrument is equipped with a three-dimensional isotropic probe of up to 40GHz, which can easily deal with 5G base station, radio television launch, radar environment and other environmental electromagnetic radiation monitoring.
Measurement and results
l Early isotropic or uniaxial (x / y / z) instantaneous field power
l Early homogeneity field strength maximum, RMS, time / spatial average
l Minimum record time 1 minute
L Maximum Record Time: 127500 h
l Alarm function (custom alarm value)
l Up to 30000 measured data storage
Interface
l Probe host integrated design
l Power on the test, easy and convenient
l USB connection PC
l 4 LED lights corresponding to the limit
Battery and charging
l Built-in lithium battery
l equipped with power adapter
l Battery is more than 100 hours
Application
l Mobile communication, radiation detection of radiation tower and other electromagnetic radiation
l Professional health, workplace and other electromagnetic field safety testing
l third-party electromagnetic environment testing mechanism
l Radio spectrum management
l Electromagnetic safety testing of national defense electronic equipment
l Aerospace equipment electromagnetic environment monitoring
l University scientific research institution electromagnetic radiation experiment test
l EMI electromagnetic compatibility test
l radar electromagnetic environment real-time monitoring
Friendly and flexible user software
Analysis software two management mode: administrator mode and user mode
l Administrator mode: Configure the device according to different limits, provide custom limit privileges
1. Set the alarm reference limit, as long as the ambient field reaches 25%, 50%, 75%, and 100% of the reference value, 4 warning lights are activated.
2. Set the reference value of the trigger alarm, the average of six minutes, as long as the average of the previous six minutes is calculated, the alarm will be alarm. Six minutes According to Icnirp recommended time.
3. Set the recording cycle
4. Open the device's switch and measure it on its own
5. Use the USB line link PC to export the measurement data and display the result
l User mode: Download measurement results, store record data analysis graphics
High performance probe, high measurement accuracy
EME Guard is equipped with a wideband allotropic 3D probe.
Each device has a calibration report. Make sure the probe sensor is optimized to ensure maximum equivalent
Our other product:
