As Nikkang, which is the company's expertise, automotive electronics, especially electric vehicles are one of the most critical strategic markets in its company in recent years. It is also the company's large-scale environment with capacitors in consumer electronics markets, in advance and acquisition Rapid growth market. With the increasing use of electric vehicles, Niger-Kang continues to launch a variety of new products and technology solutions, hoping to continue to maintain the technical advantages of electric vehicle market. Recently, Niji introduced its various products and solutions for the 2017 in the electric motor market in Beijing.
Nikon's advantage
Since 2009, the vehicle charger has been developed, and the environment related business and household and public and industrial power storage systems such as V2H systems have been promoted for the first batch of electric vehicles (EVs). Nijang officially entered the field of new energy vehicles. The Chinese market is the fastest market in electric vehicle. Jikang Co., Ltd. Capacitor Division, the business strategy, Changshan, Changshan, said that China's sales of electric vehicles from 2016 have exceeded the United States, for Nijang, two or three years of time car related product sales have been nearly five Double, of course, this part includes the electric control of the fuel car, the electric drive, and Nikang believes that the development of new energy vehicles in China will be thriving with the national policy.
At present, Niger-to-electric car is mainly divided into several major areas, namely car molds such as OBC, aluminum electrolytic capacitor and film capacitor, fast charging scheme including fast charging piles and related capacitive products, public / industrial power storage systems And homeholding power storage systems. Mao Jidong, Director and Deputy General Manager of Nikodang Shanghai Co., Ltd., said this means that Nikilao from key component capacitors to function molds, from the V2H system supporting public facilities to fast charging piles, s solution.
In terms of key components, Nigerofan can provide capacitors and integrated circuit products, widely used in automotive transmission systems, chassis and safety device programs, interior accessories and exterior solutions. Multi-automotive electronic function units. In terms of capacitors, focusing on OBC aluminum electrolytic capacitors, aluminum electrolytic capacitors and variable frequency thin film capacitors, etc., integrated circuits and PTC products are used in EV charger integrated DCDC converters and PTC positive temperature coefficient thermistors . Mao Jidong introduces that the biggest feature of Nigero's automotive electronics is high reliability, high temperature characteristics, while providing a more lightweight product and better seismic performance, so that the reliability of the entire system is more prominent .
For car companies, the most fundamental or Nikon's products are more competitive than competitors, and they talk about the Mao Jidong, such as several hi, Niger Congcale has developed and produced from materials to finished product. All techniques autonomous are truly realized from all techniques for processing from components to the product. The benefits of this is that Niger-Cong can meet the actual needs of customers, and refer to the corresponding needs to fully customize design, such as cooperating with research institutions to develop the thinnest PP film production, and can narrow the weight and volume of the entire capacitor. Compared to competitor bicycles can reduce the weight of 30 kg, thereby reducing the weight of the vehicle. For example, when developing a specific mold, you can use the best simulation technology to save customer mold fees, reduce system development costs. In addition, Nikon's BCP global production mechanism can ensure that Nikon's products are produced on the production line of the vehicle factory supply certification, customers can choose.
New product new features
Electric cars are booming, the design of electric vehicles is constantly perfect, compared to parts of traditional cars, more electronic equipment for electric vehicles, replace fuel into power-driven sources, this is the component of the entire electronic power system Strict challenges.
Aluminum electrolytic capacitors are the traditional advantages of Niji, but also the very widely used products in electric vehicles, especially in complex circuit design, in order to meet this demand, Nijang has been committed to developing smaller settings. Capacitors of capacity have achieved good results in aluminum electrolytic capacitor cathode materials. Special Nikon launched a new GYA series conductive polymer hybrid aluminum electrolytic capacitor, combined with the respective advantages of Niger-before, as a true cathode, simultaneous addition of conductive polymer and electrolyte to make improvement "GYA" series of conductive polymer mixed aluminum electrolytic capacitors not only have the film repair function of the aluminum electrolytic capacitor, but also the ESR characteristics and high heat resistance of the conductive polymer solid electrolytic capacitor. Compared to the non-solid aluminum electrolytic capacitor, "GYA" series achieves long life of 125 degrees more than 1,000 hours, and the permeation of the ripple current has also achieved more than 4 times higher ripple. On the other hand, the leakage is reduced to about 1/5 compared to the conductive polymer aluminum solid electrolytic capacitor, and contributes to the power saving of the unit. Further, the electrolyte penetrates into the depth of corrosion pits of the electrode foil, and therefore, it is possible to obtain approximately 4 times the capacitance rate of about 4 times compared to the ordinary conductive polymer aluminum solid electrolytic capacitor. By developing an electrolytic solution that matches the material of Nikon's alone conductive polymer, the electrolytic solution of the conductive polymer film, ensures the highest level of 4,000 hours in the industry at 125 ° C.
The advantage of the thin film capacitor relative to the aluminum electrolytic capacitor is that the effect of absorbing noise in the high-frequency environment, the effect of the filter ripple is very good, and the current resistance is only a bit. From the perspective of temperature characteristics, the thin film capacitor does not have a aluminum electrolytic capacitor with a temperature change of 50%, and the stability is very good and longer life. Generally, the mission life of the aluminum electrolytic capacitor is several thousand to 10,000 hours, while the film capacitor generally has a life expectancy for more than ten years. For the automotive industry, the problem of service life is very critical. Mao Jidong emphasizes that "maintenance can make the owners to maximize the interests, because they have made money, every maintenance needs to pay costs, maintenance-free maintenance Will help the owners as much as possible. " The environment in the automobile is relatively bad. In order to ensure that the film capacitance is not easily burned and caused by fire, Mao Jidong said, "Our film capacitors are self-healing, you can see the film on the film, and there is no connection Together, it is a gap. The reason is that once the film capacitor is short-circuited, the short circuit will break the film, and this part will be warm and caused by the melt of the material. After the blow, it will be connected together, this The area will also be deleted, it has become a broken product, so the product is very high in plasticity, "Read the full text, the technical area
Passla production Modely_and Model3 same platform in November next year
GM Bolt's OTA upgrade, the battery has problems with software to make up
Forecasting the 2018 new energy vehicle market or four major changes
The trend of future electric vehicles _battery capacity breakthrough and security are key
Unmanned, advanced auxiliary driving solutions and market winds
Our other product:
