"I. Preface: chicken eating games are hot, and the price of memory is not lower
On March 23, 2017, South Korean developer bluehole and Brendan Greene, producer of h1z1 and armed raid 3, jointly launched Jedi survival: escape, which won the love of the majority of players with a highly open world and unique competitive mode.
According to the game market data of 2017 released by Superdata data organization, the game Jedi survival was launched for eight months in 2017, with a total revenue of US $714 million, about RMB 4.48 billion, and this number is still rising.
Though the game player make complaints about the pot, it is not important for the game player. The game player has been concerned about whether the game experience has been promoted because the Jedi survival has been optimized by the players since the birth of the game. It not only takes the configuration but also the server is always dropping, and the 8GB memory is not enough at all, and GTX1080 can only reach 40-60 frames.
After nearly a year of optimization, the game experience has improved slightly. At the same time, the national service is about to go online to solve the problem of old server disconnection. However, the recommended configuration given by the domestic official website is still not low, the processor and graphics card have reached the mainstream level, and the memory capacity has also increased to 16GB.
On the other hand, the storage demand of mobile electronic devices is increasing, and the number of mobile phones with 6GB and 8GB memory is emerging. In addition, with the decline of PC market, memory particle manufacturers such as Samsung and Hercules will naturally give priority to meet the demand of mobile market, which leads to the soaring PC memory price.
In 2015, you could buy an 8GB DDR4 memory for less than 300 yuan, but now the price of 8GB DDR4 memory has doubled to 729 yuan, which was close to 1000 yuan at the end of last year.
Recently, Yingchi released the latest game series memory, game ii-3000mhz. From its name, we can see that it is different from the hall of fame and will series. The game series is equipped with cool RGB lights, focusing on the cost-effective game market. It is positioned higher than the general series and slightly lower than the hall of fame series.
The price of a single gamerii ddr4-3000 memory is only 679 yuan, while the current 8GB ddr4-2400mhz memory on the market also costs about 700 yuan.
The default frequency of Yingchi game II memory reaches 3000MHz. Players can also overclock according to their own needs.
2、 Appearance: colorful RGB lamp strip metal stamping aluminum heat sink
The new memory of Yingchi game II adopts a new colorful light, which is more colorful in appearance than the first generation of monochrome breathing light.
↑ ↑ ↑ front of Yingchi game II package
In the center of the package are seven different colors of memory, symbolizing that this memory has seven different colors of lighting effects. In the upper left corner is the logo of Yingchi, and in the lower left corner is the logo of the famous game club we.
↑ ↑ ↑ back of Yingchi game II package
On the back is a description of the characteristics of memory RGB breathing lamp, memory particles, manufacturing process, etc. the nameplate next to the QR code at the bottom indicates the specific parameters and specifications of this memory.
↑ ↑ ↑ YinChi game II internal packaging
The inner part is packed with hard plastic shell, which can effectively avoid the damage to the memory caused by external forces during transportation.
↑ ↑ ↑ Yingchi game II front
The memory heat sink is made by high-precision ink screen printing process and metal stamping process, and has two colors of orange and gray. The thickness of the heat sink is 1.2mm, which is 0.4 ~ 0.6mm more than that of the ordinary memory module heat sink, which can achieve more efficient heat dissipation efficiency.
↑ ↑ ↑ shadow game II back
The back is the same as the front. The only difference is that there is a parameter label in the lower left corner of the memory.
↑ ↑ ↑ shadow game II top
In order to avoid monotony, the translucent light guide strip at the top is printed with a hard black strip pattern.
↑ ↑ ↑ shadow game II side
The logo of Yingchi game series is printed on the top of the side, which has stronger visual effect and E-sports feeling than the old logo.
↑ ↑ ↑ inside of shadow game II
As it is difficult to disassemble the memory, here we will show you the internal rendering provided by the official. Game II memory is equipped with a shadow Chi customized z-007 lamp effect control MUC IC. In addition, it is also equipped with five ligitek highlighted RGB LEDs to ensure the lighting effect and stability.
↑ ↑ ↑ here is the lamp effect diagram / video of Yingchi game II
At present, the memory lighting effect cannot be controlled separately, and can only display the breathing lamp effect by default. The breathing lamp of each color lasts about 5 seconds, and the flashing colors are pink, orange, red, green, green, blue and purple in turn.
↑ ↑ ↑ shadow game II light effect
↑ ↑ ↑ shadow game II light effect
↑ ↑ ↑ shadow game II light effect
↑ ↑ ↑ shadow game II light effect
↑ ↑ ↑ shadow game II light effect
↑ ↑ ↑ shadow game II light effect
↑ ↑ ↑ shadow game II light effect
↑ ↑ ↑ shadow game II light effect
3、 Performance test: stable overclocking 3466mhz, comprehensive performance increased by 12%
In order to ensure full memory performance, Intel i7-8700k and a thousand yuan integrated water-cooled radiator are selected as the processors of the test platform to maintain the high performance level of the processor.
In this test, six test software are selected, namely CPU-Z, aida64, Sandra, WinRAR, wpirme and memtest64, to test the read, write, copy, stability and performance improvement before and after overclocking.
——CPU-Z_ 1.8.1.1
Use CPU-Z software to view CPU information. The software is very simple to use. After downloading, you can directly click the file to see the CPU name, manufacturer, kernel process, internal and external clocks, local clock monitoring, memory and other parameters.
At the same time, the CPU performance test function is also provided in the test score interface of the software. The test is divided into two modes: single thread / multi thread. The two modes test the single thread and multi thread of the CPU respectively, and then give the corresponding score as a reference.
↑ ↑ ↑ CPU-Z before overclocking (left) and after overclocking (right)
The default actual frequency of the memory is 1500mhz, the equivalent frequency is 3000MHz, and the timing is 16-18-18-38; After overclocking to 3466mhz, the actual frequency is 1733mhz, the timing is still 16-18-18-38, and the delay does not increase.
↑ ↑ ↑ enable x.m.p setting in ASUS motherboard BIOS
To obtain high-frequency memory performance, you need to turn on the x.m.p (extreme memory profile) setting in the motherboard BIOS so that the memory can work at the default 3000MHz, otherwise it will only run at the lowest frequency of 2133mhz.
↑ ↑ ↑ select the appropriate memory frequency
It is worth noting that the overclocking ability of memory particles is limited. Even if there are many memory frequencies displayed in the motherboard BIOS, it does not mean that your memory module supports these frequencies.
Therefore, players should overclock the memory according to the overclocking suggestions provided by the official. Otherwise, the system may crash or the computer hardware may be damaged.
↑ ↑ ↑ CPU-Z SPD information
SPD information shows that the default maximum frequency is 2133mhz. After x.m.p setting is turned on, it will automatically increase to 3000MHz.
——AIDA64
Aida64 is a tool for testing software and hardware system information, formerly Everest. It provides benchmarks for CPU, disk, and memory. Aida64 provides a 64 bit benchmark to measure the speed of computer processing various data tasks. The memory and cache benchmark can be used to analyze the memory bandwidth and latency of the system. The processor benchmark uses MMX and 3DNOW! And SSE instructions.
↑ ↑ ↑ aida64 before overclocking (left) and after overclocking (right)
↑ ↑ ↑ aida64 memory speed test
There is a default 3000MHz state in Yingchi Hall of fame. The reading and writing speeds are 43780mb / s, 44609mb / s and 39414mb / s respectively; After overclocking to 3466mhz, the maximum write performance is improved by 15.8%, the copy performance is followed by 14.3%, and the read performance is improved by 13.9%.
↑ ↑ ↑ aida64 memory delay test
In the default 3000MHz state, the delay is 48.7ns. After overclocking to 3466mhz, the delay is reduced to 44.9ns, with a reduction range of 7.8%.
——SiSoftware Sandra
Sisoftware Sandra is a powerful system analysis and evaluation tool, with more than 30 analysis and test modules. Sisoftware Sandra has the benchmark tools of CPU, drives, CD-ROM / DVD and memory, which can save the analysis result report list to disk.
↑ ↑ ↑ Sandra before overclocking (left) and after overclocking (right)
↑ ↑ ↑ Sandra memory speed test
Due to the difference of software calculation method and test content, the speed may be different from aida64 test value.
In the case of default frequency (3000MHz), the floating-point bandwidth of memory is 29.62gb/s, the integer bandwidth is 29.92gb/s, and the overall bandwidth is 29.77gb/s; After overclocking (3466mhz), the floating-point bandwidth performance is improved by 12.7%, the integer bandwidth performance is improved by 12.3%, and the overall bandwidth is improved by 12.5%.
——WinRAR
WinRAR is the most popular decompression and compression software at present. It perfectly supports zip files. At the same time, it also has a built-in performance benchmark tool to monitor the compression / decompression ability of computer processors.
↑ ↑ ↑ WinRAR benchmark
Under the memory default frequency (3000MHz), the WinRAR benchmark score is 20008kb / s. After overclocking to 3466mhz, the WinRAR benchmark score is 21366kb / s, and the performance is improved by 6.7%.
——wPrime
Wprime is a software that tests the computing power of computers (especially the parallel ability) by calculating prime numbers. However, unlike super PI, which can only support single threads, wprime can support up to 16 threads, that is, it can support eight core processors, and it is more accurate than super PI in testing the performance of multi-core processors.
Due to the small amount of 32m operation, it is not easy to obtain the impact of memory frequency change on the performance. Therefore, this test is obtained under 1024m operation mode.
↑ ↑ ↑ wpirme (1024m) time-consuming comparison
In order to reduce the error caused by external reasons, test three times at each memory frequency and take the average value, with an interval of 3 minutes after each test, so as not to affect the accuracy of the next test result due to the high processor temperature.
Under the memory default frequency (3000MHz), the test score of wprime (1024m) is 106.588s. After overclocking to 3466mhz, the test score is 106.464s, the performance is improved by 0.1%, and the score difference is less than 1%, which can be regarded as an error.
——MemTest64
The memtest64 desktop memory detection tool produced by techpowerup is not the same product as the previous memtest pro. After testing, memtest64 is more advanced. It will not be divided into several windows to test separately because of its large memory.
It can detect all memory at one time. There is no problem with 4G or 64g. It can be tested directly under the win system desktop without going to the DOS interface. It supports 32-bit and 64 bit systems, Win XP / 7 / 8 / 10 and winpe.
↑ ↑ ↑ memtest64 stability test
In the memtest64 test, 10 cycle tests are selected, and check stop the test when a memory error is encountered. The test did not encounter the problem of program error. The memory passed the 10 cycle test perfectly at the frequency of 3000MHz.
There are 6 software and 9 items in this test. In addition to the 0.1% error of wprime, which can be regarded as error, there are 8 item test scores. After synthesizing and taking the average score, it is concluded that the performance improvement range after overclocking to 3466mhz is 12%.
Compared with 3000MHz, the frequency of 3466mhz increases by 15%, while the actual read-write performance increases by 12%. It can be approximately considered that the actual read-write performance increases by 0.8% for every 1% frequency increase.
4、 Summary: 3000MHz cost-effective memory is the first choice for eating chicken
Appearance: the memory of the new Yingchi game Ⅱ DDR4 focuses on the upgrade of RGB lamp effect, which is upgraded from the first generation of monochrome breathing lamp to seven color breathing lamp, which can bring more colorful visual effects to players.
Yingchi game II memory adopts aluminum heat dissipation vest with high-precision ink screen printing process. The thickness of 1.2mm heat sink is 0.4 ~ 0.6mm more than that of ordinary memory module, and the heat dissipation performance is stronger. With dark orange and dark gray, the overall feeling is more comfortable.
Performance: the memory of game II is the overclocking DRAM particles selected by Yingchi. The default frequency is 3000MHz, and the official overclocking recommended value is 3200mhz. However, in the actual test, it can still operate stably when the overclocking reaches 3466mhz.
In terms of actual reading performance of aida64, the actual write performance can reach 44609 MB / s at 3000MHz by default, and the write performance can reach 51673mb/s after the frequency exceeds 3466mhz, with an increase of 15.8%. Even if the average test results of 6 software have achieved 12% neutral energy.
Selling price: this memory is now on the market. The selling price of a single Yingchi game Ⅱ DDR4 8GB memory is 679 yuan, and the selling price of the package version is 1399 yuan. Compared with the previously launched Hall of fame 4000MHz high-frequency memory, this memory is the product of balancing performance and price, which is more suitable for game players pursuing cost performance
Our other product:
