OPA2333P is a CMOS operational amplifier that uses special automatic calibration techniques to provide extremely low offset voltages (10μV, maximum), while achieving approaching zero. This high-precision, low-static current micro amplifier provides high impedance input (common mode ranges exceeding power rail voltage 100mv) and rail-to-rail output (within 50 mV range of the power rail). This device can be optimized for low voltage and single power operations for low voltage and single power operations for low-voltage and single power operation.
In addition, the OPA2333P also has a rated maximum startup time. This rated start-up time ensures high precision performance within 500μs time range after the amplifier is powered, thereby achieving reliable and durability of dynamic power operation.
The OPA2333P provides excellent CMRR without intersection associated with conventional complementary input. This design can achieve excellent performance during the drive analog-to-digital converter (ADC) without reducing differential linearity.
The OPA2333P uses a 2mm × 2mm 8 pin WSON package and the rated operating temperature range is -40 ° C to 125 ° C.
characteristic
Low offset voltage: 10μV (maximum)
Zero Wait: 0.05μV / ° C (maximum)
Rated startup time: 500μs (max)
0.01Hz to 10Hz Noise: 1.1μVPP
Static current: 17μA
Single power supply
Power supply voltage: 1.8V to 5.5V
Rail-to-rail input / output
Mini Package Size: 2mm × 2mm WSON
Diyamp-EVM is a unique assessment module (EVM) series that provides an amplifier circuit in real life for engineers and DIY enthusiasts, so that you can quickly complete design concept assessment and simulation verification. It uses three industry standard package options (SC70, SOT23, SOIC) and provides 12 popular amplifier configurations, including amplifiers, filters, stability compensation, and comparator configurations for single power supplies and dual power supplies.
Diyamp-EVM Series can achieve fast and convenient prototyping, and use common 0805 or 0603 surface mount components. By configuring multiple combinations, EVM enables you to build a wide range of evaluation circuits, from simple amplifier circuits to complex signal chains. All EVMs are compatible with the test circuit board, the ultra-small A version (SMA), the joint and wired interface connection, cross-compatible with most analog-to-digital converters (ADCs) and digital-to-analog converters (DAC) EVMs. In addition, the optimized layout of DIYAMP-EVM reduces the parasitic effects brought by the prototype design of the test circuit board.
The Diyamp-EVM family will bring you confidence in the entire link from the data sheet to simulation to simulate verification to quickly advance your design.
characteristic
3 packages available: SC70-5, SOT23-5 and SOIC-8
12 circuit configuration options: non-reverse, reverse, active filters, differential amplifiers, comparators, etc.!
Dual power supply and single power configuration
PCB designed for high performance: optimization for each function
Multiple interface options: SMA, connector, test circuit board, cable
Designed for 0805-sized components; 0603 size-friendly
The schematic is provided in the PCB screen.
A variety of connector options for input and output connections: SMA, test points and lines
Our other product:
