The Nexus series has been the benchmark of Google Android mobile phones, while Nexus 6P, because it was the first time by Chinese manufacturer, it was more concerned. IFIXIT is also the first mobile phone that dismantles Huawei, which is full of expectation of the new generation of Chinese manufacturing performance. IFIXIT received a black version of the phone, then they first spitted the NEXUS 6P, a large-scale camera module design and the bad grip of the big body.
The dismantling of formally entered, the structure of the fuselage is very compact, and the whole machine does not have a visible screw. Disassembly needs to heat the plastic strip on both sides of the upper and lower sides, and then open the adhesive glue.
After removing plastic on both sides of the upper side, you can see the inside fixed screws. The screw does not have the apple to use so rare, a slightly small ordinary screw batch can be rotated. The photochastic disc is separated by the wrapped metal rear cover and front panel. This process is better in the current integrated body.
Compared with other mobile phones, there is no obvious independent device in Nexus 6P. Most components are integrated on a motherboard. This also makes iFixit think of HTC One, which has brought painful memories in the first two years. M7. Therefore, the disassembly can only start from visible and battery cables.
In order to prevent the shaking of the body, the battery is internally vibrating, and the battery of Nexus 6p is fixed on the back plate. Disclosure found that this is a 3.82V, 13.18WH battery, and supports Qualcomm Quick Charge 2.0 quickly charge.
Although Nexus 6P is highly integrated, it is not difficult to separate, as long as you pay attention to staggered cable, avoid pulling them. Huawei has prepared a fingerprint chip from the FPC this time, and there is waterproof processing around it, which can avoid erosion of the water vapor on the module during daily use. At the same time, you can also feel the speed of fingerprint recognition.
The main camera bracket is soldered on the motherboard, which is very fast. This camera is from Sony, Model IMX 337, lens aperture / 2.0, and the parameter is exactly the same, only 6P's processor calculation performance is better, the camera's own electronic anti-shake function is opened, and supports in 240 FPS format Shooting a delay movie.
Nexus 6P's motherboard is usually concentrated in various large chips, and this part of the design will also affect the heat dissipation of mobile phones. (Red box: magnesium light MT53B384M64D4NK-062 3GB LPDDR4 memory Manage IC. Green Box: High-pass SMB1351 Fast Charging IC. Light Blue Color: RF Micro Devices RF8117V. Dark Blue Box: Anwa High ACPM-7251 Multi-frequency Module Power Amplifier. Purple Box: US Avin MAX989 Low Voltage Rail to Rail Import / Output comparator.)
The back surface of the motherboard is also densely equipped with a chip. (Red box: Bo Tong BCM4358 5G WiFi 802.11ac chip. Orange box: High-pass PM8994 power management IC. Yellow box: NXP PN548 NFC controller Green box: High-pass WCD9330 audio codec. Light blue box: High-pass WTR3925 RF transceiver )
After the dismantling is complete, the family is delivered!
Our other product:
