Let's look at science and technology crystallized lying under Pixel 3 XL bangs screen:
6.3-inch OLED screen, resolution is QHD + 1440 × 2960 (523 PPI), equipped with a fifth generation gorilla glass.
Eight core, 64-bit Qualcomm Snapdragon 845 processor (2.5 GHz + 1.6 GHz), 4 GB LPDDR4X memory
12.2 mp, ƒ / 1.8, main camera is equipped with optical anti-shake, double-pixel phase autofocus; double 8.1 MP self-photographing
64 GB or 128 GB built-in storage
Qi wireless charging
IP68 waterproof and dustproof
Android 9.0 PIE
Before I sneaking the interior, let's take a closer look at the smooth skin of Pixel 3 XL, next to its small compatriots.
The back of the two phones look like a result of the mixing of the two generations, but this time is a whole glass (part of the matte effect).
Unfortunately, glass does not have aluminum tolerance, we can only pray that this is likely to be easily replaced.
Come to the front, we see an extra camera on the top of the screen.
That's right, when everyone puts more cameras on the back, Google came to front and increased a super-wide camera (19 mm equivalent focal length) next to the existing wide-angle camera (28 mm equivalent focal length).
Pixel 3 XL unique trendy robot Liu Hai meets us to remove this phone.
The front speaker makes Pixel 3 avoid leaving any speaker opening on the aluminum border.
Stacked together, it is clear which one to one size larger than the other one, but beyond that there are no more differences.
USB-C charging interface, SIM card slot and 80-year-style power button have in two mobile phones.
Now that we have completed the work in the appearance, it is time to enter the interior.
Experience tells us that only one suction and cutting can leave the display, but when these means do not work, we will take a large (hot) gun.
It seems that Pixel 3 XL still uses the foam, but it is more tough to the very friendly thing that we have seen last year.
We took out the reliable small partner isclack, expect to separate the screen components, but the back cover succumbed.
The whole thing began to remind us that Pixel 3 has its own characteristics, and has more well known viscosity.
After tangled in the expectation and glue, we finally came in!
Maybe Googel believes that additional glue is necessary for more waterproof indices, but we have seen better IP68 mobile phones.
Thanksgiving, fingerprint sensor cable is sufficient to avoid excessive enthusiasm to open.
Internal sights and we expects almost: Shiny new wireless charging board, a battery, a motherboard, a pair of cameras and a fingerprint sensor live on the back cover.
The metal cover on the motherboard is small, and the SIM card is hood below the speaker component.
Google believes that several screws in the area can persuade us? If you can't think of it, we prepare an additional 111 screwdrons that the plum screwdriver and insurance.
The strong adhesive trend is still continuing, securing the NFC coil on the Pixel battery. But we gave some opportunities for wheezing!
The battery is maintained for a friendly easy to pull. If your technology is passing, you will have a simple removal opportunity.
But this strap is not helping, but we have better luck on Pixel 3.
We have made batteries in the floss, but accidentally cut the following fragile strip cable! There is an unpredictable - the repair manual can help us in this place.
After the test of glue, the battery was removed: Pixel 3 XL battery capacity 13.2 WH. This is actually smaller than the 13.6 WhwH of Pixel 2 XL, but the 13.28 WH of the initial generation of Pixel XL is almost.
Pixel XL still defeated iPhone XS Max (12.08 WH), and Galaxy S9 + (13.48 WH) close.
On the pit that the battery has been lying, we removed an antenna covering the motherboard.
At the southern end of the mobile phone, we defeated more glue and rescued something like another shield.
Another trap! This shield is actually a speaker housing, which we have just split it into two halves to try to approach the part.
The speaker room is sealed with waterproof, and must break the seal to close to any common port on the panel.
As the shield is removed, we can finally see the latest Pixel's motherboard.
With the motherboard is out, we can not help but notice that there's thermal paste to help its bottom, used to transfer the chip from the hardest-working heat to the metal frame.
It looks a lot of thermal creams, but strong hardware will produce a lot of heat.
These glue are tired of us - sit down and see these chips.
Meiku 8JE77G9WGH 4 GB LPDDR4X DRAM is located above Qualcomm Snapdragon 845
Sea Kexi H28S7Q302BMR 64 GB Universal Flash
Google SR3HX Pixel Visual Core (as seen in Pixel 2 XL)
Gao Tong SDR845 RF Transceiver
Qualcomm QPM2622 and QPM2642
Gao Tong QET4100 40 MHz Envelope Tracker
Qualcomm PMI8998 power supply IC
There are still some ...
Google H1C2M Titan M Safety Chip
IDT P9221 QI wireless charging receiver
Qualcomm WCD9340 AQSTIC Audio Codec
Qualcomm QDM3620, QDM3670, QDM3671 diversity receiver module
Qualcomm PM845 power management IC
Village 1QB SS8601001
Qualcomm QPM2635
We carefully remove the left eyeball wide-angle camera on the frame.
According to Google, this increasing camera allows you to put more friends in your selfie.
On the back, Google will fight again to gamble Ai can help a sensor to dry.
According to early evaluation, they may not be wrong. The statement is that this is a slightly upgraded Sony IMX363 sensor, and the rest is Pixel Visual Core.
There is no accident in the panel, there is a USB-C interface, SIM calorie and some antenna hardware.
The vibrating motor is a bit unwilling to leave your own home, but our crow is very persuasive.
This vibration motor is said to provide more precise tactile feedback over last year.
Standards are as cute last year.
With scientific name, we choose to open the screen to learn from it. It is fierce resistance, but lost to heat, a little patience and self-confidence can do.
At first, the black edge of the border lie to us that the screen is bent down to the border, the future skeepers, be careful!
The applause is ... is Samsung! The rumors are everywhere, but Google has chosen the reliable AMOLED panel this year.
Samsung's panel should reliable than last year, but unfortunately, this product is also equipped with Samsung's type of repair process.
The method of replacing the Pixel 3 screen is very ghost, the big probability needs to replace the entire border of the phone.
Finally, it is also very important, the screen chip is alone in the screen cable:
Samsung S6SY761X touch controller (like S9 +)
The above is all exquisite parts contained in the Galaxy Pixel.
It seems that Pixel has been in line with the hassant Galaxy product line, let it have a familiar antenna component, stubborn battery, and a hard-replaced screen that Samsung itself manufactured!
Replacing damaged screens more than needed to completely disassemble the phone, you still have to worry about the back cover. Pixel 2 XL back glass covers 20% of the mobile phone - Pixel 3 XL 100% back panels are damaged. This is not a good sign for removability ...
Hot recommendation:
Intel RealSense Depth Camera D400 Series "More Convenient Secret"
Analog Devices Eval-ADXL362 Evaluation Board to Develop Designers More Choice
Cypress Semiconductor PSoc6 BLE development kit, beautiful design is about to happen
STMicroelectronics VL53L1X flight time ranging sensor, absolute ranging fearless color and reflection
NXP I.MX 8MQUAD Evaluation Kit MCIMX8M-EVK, a high-performance development tool for unpacking
Infineon IM69D120 and IM69D130 Xensiv MEMS microphone, designed for low distortion and high signal-to-noise ratio
Original address: https://www.eeboard.com/news/google-pixel-3-xl-5/5
Our other product:
