HTC One (M8) has attracted a lot of attention, and this new machine has the first double-shot in the end, and it has become a hot topic. Now, the famous dismantling website iFixit has completed the disassembly of HTC One (M8) in the first time, for the first time, for the first time, the internal structure of the machine and the partial components used. Next, let's take a look at this freshly baked HTC new machine.
First enjoy the appearance
Back
First come to a video, it is fast:
Https://www.eeboard.com/bbs/thread-29393-1-1.html
Unpack:
Take the metal cover covered on the speaker, it looks at it, and the screw between the body is hidden under this metal piece.
Screw:
Special tool separation:
Separate, you can see that the internal workmanship of M8 has made great progress than the previous generation HTC One.
The motherboard portion of the M8 is fixed to the screw and the upper silver-white tape is fixed on the body, so the disassembly the motherboard will be off the tape.
After leaving the tape, it is the most important part of the whole machine.
The following is the main chip section of the machine, namely:
The red part is ELPIDA FA164A2PM 2 GB RAM and Qualcomm Snapdragon 801 quad-core 2.3 GHz processor;
The orange part is the flash di SDIN8DE4 32 GB flash drive;
The yellow part of the left is intended to semiconductor 0100 aa 9058401 mys;
The two cyan parts are high-pass PM8941 and PM8841 power management ICs;
The right blue portion is the AVAGO ACPM-7600 power amplifier module;
The Synaptics S3528A touch screen controller is the Synaptics S3528A touch screen controller.
The last two black boxes are the high pass WTR1625L radio frequency transceiver and WTR1625 modem
After removing the motherboard, it will turn to the battery. However, the battery is also sticking on the screen panel. It is not very easy to take it down. At the press conference, HTC focuses on the power management capability of M8, thanks to lower work. The demolled chip and better software, the M8 endurance will be upgraded, and the 2600 MAH battery has increased by 300 mAh than the previous generation.
After removing the motherboard and the battery, the remaining main is above the camera part, because it is a double camera, so this part looks quite complicated.
This is the picture of the double camera, depending on this, HTC One (M8) can complete various fancy photographic effects.
In addition to the main cameras, NXP 44701 NFC controllers (red) and Qualcom QFE1550 dynamically matched antenna tuner (orange) is also on this panel.
Ok, there will be the last large screen. The tragedy is that IFIXIT has an accident here, because the wrong place is selected, and the cable is cut off, and there is also a lot of glue stick sticking between the screen and the body, so dismantling is not easy. Fortunately, HTC provides a free replacement service for half a year.
HTC One (M8) The whole machine is 9.4 mm, which may be a full-fitting screen, and the thickness of the screen panel is only 2.1 mm.
According to the practice, the thirteen is a full family blessing and score. I believe that everyone also guessed that HTC One (M8) is basically a machine that does not have a renewed, its maintenance is 2 points (minimum 1 point), a large number of glue, tape and shielded copper sheet make Many components are difficult to remove, and many components must be destroyed. However, it is worth gratifying that metal fuselage and relatively precise structures make this machine very strong.
Our other product:
