On the evening of May 9, the hammer held a conference in Shenzhen, officially released the new machine nuts.
In terms of design, nut pro will no longer stick to the symmetrical design of the hammer, but the shape still has a thick hammer style, which is designed with glass + metal dual material, with the main body as glass, and the front and negative surface including the bottom of the side. Moreover, the side of the fuselage is very sharp, smooth side, with two highlighted narrow edges, and the whole machine size is 155 × 73.4 x 6.98 mm, and the weight is 158 grams.
In terms of configuration, nut Pro uses 5.5-inch 1080p display, with Snapdragon 625/626 processor, built-in 4GB memory and 32/64 / 128GB body storage space, provide post double 13 megapixel camera, battery capacity 3500mAh, support double Card dual standby.
It should be noted that the 32GB of nuts PRO uses 8 megapixel front cameras, while the 64 / 128GB version is a 16 megapixel front camera.
In terms of price, the top three versions is 1499 yuan, 1799 yuan, 2299 yuan.
Under unique appearance, what is the workmanship of nut pro? With such a problem, the mobile phone home disassembles the nut pro and bringing detailed maps.
Compared with the previous generation of nuts, the workmanship inside the nut pro will increase, and the internal integration is higher. Even less defects, but for such a beautiful machine, it is worthy of affirmation.
The nuts appeared at first glance, and a screw did not, and the body used double-sided glass. In general, it is generally in the form of a back surface. Remove the SIM card slot first in dismantling the previous practice.
So we need to blow up the rear cover with the wind gun, you need to be careful, lightly tighten it with the blade, and then slowly open. The rear back plate is divided into two, which is glass, small piece plastic material under the bottom.
In this way, we will see the inside of the fuselage, the internal divisions are three parts, from top to bottom, the main board, battery bin, side board, let us first remove the motherboard first, due to the internal parts, due to the power supply, it is safe Since the beginning, the advance line is powered down.
We found the BTB of the battery, first remove the protective cover with a screwdriver, followed by a plastic cripple, and we also saw two BTBs connected to the motherboard nearby, or step on the first line.
Then there are two protective covers on the motherboard, and components near the front camera and the corresponding front camera are respectively fixed.
After taking it, continue to unscrew the remaining motherboard screws and an RF plug.
Then you can take the motherboard:
Compared with the previous generation of nuts, the internal workmanship has increased, and the internal integration is higher.
Then remove the sub-plate, remove 7 screws, remove this integrated vibration unit and speaker.
Remove the BTB and RF connections here to remove the subside board.
Continue to remove the BTB interface identified by the fingerprint, carefully remove it.
The last step is to remove the battery, just take the two easy-to-pull glue, you can easily take it.
It is basically detachable here.
Below is a detail:
Double photo, front photo
Motherboard
Family blessings
Nut Pro Disassembly Overview:
1. Simple assembly of the rear glass panel, the sticker is bonded, and there will be a warp problem due to the problem of glass panel and medium frame tolerance or bonding process (microblogging has an unpacking problem). The internal structure uses the main board - battery - the three-segment design of the tablet, this design is the internal structure design used by most mobile phones, easy to develop and assemble.
2. Middle box Abandon The Hammer Technology T Series and M-B-Boxes are proud of the unbalanced one-piece box design, nut pro, with 4 break points at the top and bottom, and the histoped process is filled. At the launch conference, Lao Luo also mentioned that the discontinuation of the discontinuation is really beautiful, and the price is not ideal. The middle frame with breakpoint acts as a radio antenna.
3. The separation design of the HOME key switch and fingerprint module reduces the cost of custom component, and can be repaired with low cost after the damage.
4. The bottom portion of the rear cover is used to maintain the same feeling with the front panel, and a plastic material is used to maintain a high degree of consistence with the border, and the texture is slightly. Another possibility of using a plastic patch may affect the signal strength.
5. The motherboard is dark brown design, the internal fixed screw is divided into silver and black, adapted to different color area positions, which may be a hammer technology.
6. Nut Pro uses a mature Qualcomm Snapdragon 625/626 chipset solution, core chip point glue package. High-profile adds full-featured NFC function, using NXP NFC solutions.
7. The main camera is a double-fitting design. There is no mention of the program and camera models in the conference. After the dismantling does not find the camera related information, use the software query, the camera information is blocked.
Look forward to
Nuts PRO integral workmanship compares the previous generation of nut integration, more mature workmanship, even if there is still a little flaw, but is worthy of this beautiful machine, or is worthy of affirmation. I hope that Lao Lu can bring us a legendary T series.
Our other product:
