At the beginning of this month, Hisense issued a new machine in Beijing, Huairo, which was launched - Hisense H10, the owner's Selfie has 20 million pixel front lens, and you can take the most beautiful you anytime, anywhere. In addition to powerful self-portrait, Hisense H10 is still a high-value mobile phone, 2.5D curved screen, curved metal rear shell and rich color matching, etc. These are the additions of this machine. The Selfie of Hisense H10 is high, and the value is also very high, and these areas are easy to see, so what is the place where the general user can not see? Let's take a look at the internal workmanship of Hisense H10 through disassembly! Hisense H10 is designed with a very mature three-stage full metal body, which is also relatively simple in disassembly, just unscrewing two fixed screws at the bottom of the fuselage, using the suction cup to the screen. However, it is also necessary to pay attention to some problems, and it is not possible to force the cable. Hisense H10 disassemble Hisense H10 disassembles the screen with the fuselage, we found that the vast majority of the Hisense H10 is on the back cover, and there is no element of the screen. The screen is connected to the motherboard, and there is a metal sheet at the connection. Hisense H10 disassembles the fixed metal sheet after removing the fixed metal sheet, it will be convenient to remove the screen cable, the battery cable, need to pay attention to the removal battery cable first, to power off the motherboard, then disconnect other The cable, otherwise it may cause damage to the components. Hisense H10 disassemble Hisense H10 disassemble Hisense H10 after disassembling the machine, we can take the motherboard smoothly. In addition to the front and rear shots, the motherboard can be removed, the back of the motherboard has fingerprint identification, fingerprint identification components and The motherboard is connected by a cable, while the fingerprint recognition component is fixed to the motherboard, not detachable. Hisense H10 disassemble Hisense H10 disassemble 20 million pixel front lens (left) 12 million pixel main lens (right) bottom is a small circuit board, need to remove the speaker before removing the small circuit board, this disassembly process is still relatively simple , Remove the small circuit board after screwing the screw. Hisense H10 disassembles on the small circuit board, no components are mainly charging ports and 3.5mm earphone holes, as well as the contacts of the antenna. Hisense H10 disassemble is disassembled here. It is basically unpacking. However, the battery is still in the back cover. It can take the battery with a hot air gun to remove the battery, or easier. The battery capacity of Hisense H10 is 3400mAh, and the overall battery life is still very powerful. Hisense H10 disassemble Hisense H10 disassembled by disassembly We can see that the internal structure of Hisense H10 is not very complicated, so that this structure is easy to repair, which can reduce many maintenance costs. It is also very good to see the work in the whole, and there is a tablet fixing in the connection of the cable. The chip portion also has a shield protection, in general, Hisense H10 workmanship is more solid. Read more
Our other product:
