Hisense released a new machine of the main photo in Beijing - Hisense mobile phone H10, the owner's self-portrait of 20 million pixels front shots, and you can take the most beautiful you anytime, anywhere. In addition to powerful self-portrait, Hisense mobile phone H10 is still a high-value mobile phone, 2.5D arc screen, arc-shaped metal rear shell, and rich color matching, etc. These are the additions of this machine.
Hisense mobile H10 disassemble workmanship good structure is not complex Hisense mobile phone H10 Selfie, the value is also very high, and these areas are easier to see, then what is the place where the general user can see? Let's take a look at the internal workmanship of Hisense mobile phone H10 through disassembly! Hisense mobile phone H10 is designed with a very mature three-stage full metal body. It is also relatively simple in disassembly, just unscrewing two fixed screws at the bottom of the body, and use the suction cup to the onset screen. However, it is also necessary to pay attention to some problems, and it is not possible to force the cable.
Hisense mobile phone H10 disassemble
After the Hisense mobile phone H10 disassembles the screen with the fuselage, we find that the vast majority of the HSTT mobile phone H10 is on the back cover, and there is no element of the screen. The screen is connected to the motherboard, and there is a metal sheet at the connection.
After the Hisense mobile phone H10 disassembles the fixed metal sheet, it will be convenient to remove the screen cable, the battery cable, need to pay attention to the removal of the battery cable first, to power off the motherboard and then disconnect Other cables, otherwise the case where it may occur.
Hisense mobile phone H10 disassemble
Hisense mobile phone H10 disassemble
After Hisense Mobile H10 removes the machine, we can take the motherboard smoothly. In addition to the front and rear shots, the motherboard can be disassembled. The back of the motherboard has fingerprint identification, fingerprint identification components and motherboards through the cable. Fingerprint recognition components are fixed on the motherboard and are not detachable.
Hisense mobile phone H10 disassemble
Hisense mobile phone H10 disassemble
20 million pixel front lens (left) 12 million pixel main lens (right) bottom is a small circuit board, need to remove the speaker before removing the small circuit board, this disassembly process is still relatively simple, remove the screw, can The small circuit board is removed.
Hisense mobile phone H10 disassembles on small circuit boards, and there is no component mainly the charging port and 3.5mm earphone hole, and the contact of the antenna.
Hisense mobile phone H10 disassemble is disassembled here. It is basically unpacking. However, the battery is still in the back cover. It can take the battery with a hot air gun to remove the battery, or easier. The battery capacity of Hisense mobile phone H10 is 3400mAh, and the overall battery life is still very powerful.
Hisense mobile phone H10 disassemble
Hisense Mobile H10 disassembled by disassembling us, the internal structure of Hisense Mobile H10 is not very complicated, so that this structure is easy to repair, which can reduce many maintenance costs. The whole workmanship is also very good. There are tablets fixed at the connection of the cable, and the chip section also has a shield protection. In general, the workmanship of the Hisense mobile phone H10 is quite solid. Read more
Our other product:
