Guide: The scope of photography is very wide. In addition to manual control, many aspects can improve the shooting efficiency by automation, or the effect of manual can't do. This article will introduce a multi-functional automated photographic controller for automated photographic functions of many automated photographic functions.
Use hardware:
Electronics know only a little fur. Therefore, hardware, all are all ready-made electronic blocks. Based on the combination application.
- MEGA 2560 single-chip microcomputer x1
- I2C 4x20 LCD module x1
- 4 relay module x1
- Motor Drive Module X3
- Mobile power 12000mAh x1
(Total price RMB 600)
use the software :
Arduino IDE
The interest in photography is relatively large. The subject of shooting is also quite wide. Macro photography, micro-photography, panoramic photography, high-speed photography, delayed photography, astronomical photography, etc. have involved. And this type of subject can improve the shooting efficiency by automation. As for high-speed photography, delay photography, and astronomical photography, it is more necessary to automate control to achieve satisfactory results. Each of the above themes, there is a corresponding automation controller for sale on the market. But the function is generally a single one. And the price is absolutely less suitable. As a DIYER, of course, it will not spend money to buy this big pile of controllers (the fact is can't afford it). Then you will make it! Oh, anyway, make a super controller that has set all over all the features.
It is not to control the camera, flash, and a few stepper motors. Small Case. The line diagram is not used (not understanding). Just in the XProtic point electronic block, pick up the line, then edit a few sections, absolutely agitating.
To control so 7 octsu, there are a lot of input and output. Losing the block Arduino 2560. There are more data to be displayed, and the 4x20 LCD is absolutely less. In order to save trouble, there is a little bit. Come to block I2C. Other cheap is good. Ah, there is mobile power. At least 4, five hours. 12000mAh is OK. The logistics is really fast. OK! Everything is ready. Start wiring. Thousands of Wan Xu. But the final time passed. Super ugly, L
Cover the chassis. Use a white paper to print the bird language, attach it to the chassis. Rapida high-end, atmospheric, up grade. Take a thousand children, there should be no problem.
5 pages of menus. Eighteen martial arts.
It is time to boast the function of the controller. Frank, really not blowing. The function is to make it really super-book, absolutely defeat all market photographic controllers. Hurry to apply for patents and do some big sale. Oh! Running. The words retired. Talk about the function of the controller.
Panorama photography
Panoramic photography of the two axes.
286 frames spelling super high-definition panorama.
I have done more than 400 frames before I have a film, 6 billion pixels!
Moco video
Three axes.
It is not interested in recording. There is no sample.
Delayed photography
Like MOCO, it is also three axes. However, usually only one axis is used.
High-speed photography
Mainly water droplets. One drop, two drops and three drops have. A color to three colors of all OK.
It's not to control three electric water cages.
Gaoted photography
It is not to control the camera together with the earth.
Is serious. The Galaxy is a horse to tiger tiger.
Stars
Micro
This is a microscopic photography taken by the laminated method. Hundreds of frames are stacked together.
To use a micron-level electric slide!
Controlling the lifting of the microscope station
The microscope sleeve is taken in front of the photographic lens, and automatic stacking by the electric slider.
Wildlife photography
The controller can be connected to the digital sensor and analog sensor. What infrared, ultrasonic, laser, etc. are used. Shot of wild animals, special nights, no difficulty.
Functions are finished. Talk about the program.
It is Arduino IDE. Very general platform. It is easy to use. Control camera switches, stepper motors, etc., there is enough. The time-abundance is the program of the LCD display. More than ten kinds of photographic feature options, the menu to be five pages is tiger and tiger. And each function is used to use two, three pages as data input and display.
There are also changes to the information required before shutting down. Otherwise, when starting the next time, it is necessary to re-enter. It is not difficult. The EEPROM that calls 2560 built-in is good. Anyway 2560 built-in EEPROM is a big one. No need to do it. Tens of display, hundreds of data. Cautious EEPROM planning is of course necessary. The first time called the built-in EEPROM, how to plan to plan, really a little headache. Nothing, it is not a spectacular brain. This agitating is still agitated. I don't know if it is a stunning, or a big stupid. In short, it is agarized. The effect is still good.
There are very few awareness of the library file. I don't know what is the ready-made library can handle data in different formats and convert them between EEPROMs and LCDs. I am too lazy to write it yourself. How do you turn it?
More than 8,000 multi-line programs, structural super loose mess. It's also difficult to look at it. As a programmed back textbook, it is still good.
With this controller, go to the sea in the sea, take a few pieces. I really gave a lot of busy. However, it is almost the time when I retired. The new version is in the concept. This time, commercialization, miniaturization ........
Daydreaming ing.
After writing Burn, there is something useful to do something useful, don't necessarily want to call the beast, high-rise, and big proud. Sometimes as long as there is an idea, immediately do it. There will always be a little fruitful. Just do it
Finally, let's talk about why this Dongdong is called LNM3000. I want to think about the ultimate weapon in Ling Ling paint!
Bamboo
Author UVVVW
[Activities] Participate in the panel essay activities, win the intelligent prize!
Our other product:
