"As the new flagship of VT series, rapoo vt950 is very luxurious in hardware configuration. It not only adopts the flagship configurations such as original pmw3389 optical engine, Omron 50 million micro movements and OLED screen, but also has wireless dual-mode function and brand-new appearance design. The following editor will further reveal rapoo vt950 through disassembly to see how its internal working materials are.
At the beginning of disassembly, first heat the Teflon foot pad slightly and then separate it with a crowbar. At the same time, there are two screws under the nameplate sticker that need to be torn off. Be sure to remove all the foot pads and stickers before disassembly. Do not work hard.
The bottom and upper cover can be separated by completely removing the bottom screw. It should be noted that the bottom PCB is also connected with the upper PCB, and the power cable should be separated before separating the cable.
The battery is 14500, that is, our common No. 5 battery, with a capacity of 800MAH. Under normal circumstances, it can support 3-4 days of use, and it takes only 3 hours to fully charge.
On the PCB at the bottom of the mouse optical engine, rapoo vt950 adopts the original phase PMW 3389 sensor, which is the latest flagship sensor of the original phase. Compared with the previous generation of flagship optical engine 3360, the DPI of PMW 3389 can reach 16000, and the IPS can also reach 400.
On the PCB at the bottom of the mouse optical engine, rapoo vt950 adopts the original phase PMW 3389 sensor, which is the latest flagship sensor of the original phase. Compared with the previous generation of flagship optical engine 3360, the DPI of PMW 3389 can reach 16000, and the IPS can also reach 400.
Rapoo vt950 adopts Texas Instruments radio frequency scheme. Ti cc2543 chip has 32KB flash memory and supports data rates of 250kbps, 500kbps, 1Mbps and 2Mbps.
The optical engine lens is on the back of PCB. Rapoo vt950 main control chip adopts nuc123ld4an0 single chip microcomputer of Xintang technology, with 72mhz main frequency, 20KB SRAM, 68KB flash memory, 4KB ldrom and 4KB ISP ROM.
The optical engine lens is on the back of PCB. Rapoo vt950 main control chip adopts nuc123ld4an0 single chip microcomputer of Xintang technology, with 72mhz main frequency, 20KB SRAM, 68KB flash memory, 4KB ldrom and 4KB ISP ROM.
From the printed parameters, it can be seen that the left and right keys adopt Omron blue dot fretting, which has a life of 50 million clicks. Compared with the common 20 million fretting, the life of the keys is greatly improved, the touch of the keys is crisp, and the key range is too long, which is very reliable.
From the printed parameters, it can be seen that the left and right keys adopt Omron blue dot fretting, which has a life of 50 million clicks. Compared with the common 20 million fretting, the life of the keys is greatly improved, the touch of the keys is crisp, and the key range is too long, which is very reliable.
Kaihua red dot micro motion is adopted for the middle key micro motion of the roller, which is smaller in sound and feels softer than the left and right keys. There is not much data for other specific parameters, and the roller encoder also comes from Kaihua.
The side key PCB is relatively regular as a whole, and the solder joints on the back are round and full, but there are many residual glue, which does not affect the function, but the appearance is poor
The side key PCB is relatively regular as a whole, and the solder joints on the back are round and full, but there are many residual glue, which does not affect the function, but the appearance is poor
Kaihua red dot micro motion is also adopted for DPI key micro motion.
The left key adopts Kaihua black dot micro movement, with light pressure grams and crisp feel.
The right key adopts Kaihua blue dot micro motion. The specific parameters are unknown, but it is not different from the hand feel of black dot micro motion.
OLED screen and lighting part are also carried by independent PCB, and the tail of the upper cover is fixed by buckle. After opening, you can see the PCB of the lighting part, and the RGB lamp bead part is provided with black light shield, mainly to prevent light from overflowing from other parts.
There is also a light equalizing film on the inside of the logo, which can make the illuminated light softer and the brightness more uniform.
The OLED screen is square, with a size of 0.66 inches and a resolution of 64 * 48.
It can be seen from the disassembly that the internal components of rapoo vt950 are very regular, and different functions and parts are carried by independent PCB. It can also be seen from the hood that rapoo vt950 is also very exquisite in details. In terms of materials, vt950 can also be called luxury. 3389 optical engine, Omron 50 million micro movements, Ti radio frequency scheme, etc. are all at the current top level, and its comprehensive quality can be said to far exceed other products at the same price.
Search aiban.com and pay more attention. You can master the latest development board, intelligent hardware, open source hardware, activities and other information every day. Recommend attention!
[wechat scanning can be followed directly]“
Our other product:
