ORBAN OPTIMOD-FM 8600 Digital Audio Processor
Performance Description: 1. 5 DSP High Speed Processing 2. Separated GPI Interface 3. Adability / Automatic Software Upgrade 4. Built-in Signal Generator 5. Built-in 100M TCP / IP Network Interface 6. Built-in synchronization clock can be synchronized Or through the internt interface lock detailed Optimod-FM 8600HD is the ORBAN's flagship processor, which is a new generation of products that go beyond Optimod-FM8500. With the FM analog transmission and digital media universal five-band and two band processing functions, 8600 can provide the most stable sound of the industry, and achieve seamless switching between the channels and the source. This consistency is that your radio has created an audio signature to ensure that the audience locks their frequencies and shaping the unique brand sound. * There is no need to increase the sound density of the window gain. * Universal multi-frequency compressor adjusts penetration and loudness or opening degree and penetration, and colleagues maintain the best source between the industry * there are two Alone multi-frequency compressor, one for FM simulation, one for digital radio signal processing * Headphone jack provides a large number of drivers to overcome the ambient noise at the transmitter * set the headphone volume control * Built-in stereo encoder can provide Excellent technical conditions and ORBAN patent second generation "Half Strove Interpolation" composite limiter * Easy to use user interface, make browsing and adjustment easier * Fabricated with two equalizer, multi-frequency compressor, and peak limiter, This makes the FM and digital media and processing achieve the optimization. The bottom line passes through the process. Your FM band sound quality will be optimized to provide clear, pure, like a CD sound quality. Audio program. * The new "MX" preset can not only do the 8500 play-up preset "ready", you can still customize from the simple single knock LESS-MORE controller or use up to 60 kinds of advanced controllers, Functionality is satisfied even the most discerning live broadcast sound designer. * The DSP-based super stereo encoder and composite limiter can ensure that the FM analog signals they transmit, the peak can be carefully controlled, and the subcarriers are not considered. RDS / RBDS channels can be fully protected. * Two composite output ports that can independently adjust the output level and the two levelable SCA input port * High dynamic range analog input and output port * A AES audio input port, both AES3 output port and one AES11 synchronization Input port * three RS232 serial connectors, used for computer control, simple ASCII remote control, and later expansion * Composite IEC standard main connector AC power supply and design composite all international security authority standard RF filter * 8-channel isolation GPI input port * Ethernet connection is a standard state in the Ethernet connection to the Ethernet connection, in order to use the PC remote control application running a Windows2000 or above operating system, this application passes a TCP / IP The network can control multiple 8600 * user interfaces to improve the package, based on the 8400 easy-to-use lever, knob, buttons navigation system, increase the bright active matrix color LCD, so that 8600 is more prone to program from the front panel. * 860 The new feature is to apply the MPX power gain attenuation after clip, so that the processing structure can include more "clip sound" technical indicators * frequency response (bypass mode; analog processing transmission chain): ± 0.10 dB 2.0 hz - 15 kHz. Standard 50 μs or 75 μs pre-arc operation, left / right output and digital output can be configured as flat output or pre-loaded output by the user. * Sampling frequency: 64 kHz to 512 kHz, has been processed. * Noise: The lower limit of the output noise will depend on the processor gain setting (limit excitation, AGC excitation, two band excitation and / or multi-band excitation), door circuit level, equalization and noise reduction amount, etc., and mainly by a given 110dB of noise over-negative ratio A / D drive dynamic range control, digital signal processing and dynamic range are 144db. * Total system distortion: (to increase, 100% modulation)) <0.01% THD, 20 Hz - 1 kHz At 15 kHz, it rises to <0.05%, <0.02% SMPTE IM distortion. * Polarity (two bands and bypass mode): Maintain absolute polarity. The input port the anode signal corresponds to the output port anode signal. Delay * can disable analog FM processing delay: 16.2 seconds (maximum), single-oriented increment can be adjusted in 64kHz sampling frequencies, allowing the analog and digital path delay in the HD Radio system to match the receiver output, delay can be in any combination Apply for analog output, digital output, and composite output. However, all output delay configurations will apply the same delay. Once set, no matter what processing preset is enabled, this delay is the same. * Minimum processing delay: This is the throughput delay that is input to the output when simulating analog FM processing delay. It depends on the processing structure. 5-band normal delay is a typical 17MS, 5-band low delay is 13ms, 5-band super delay is 3ms, depending on the selected cross-structure, 2-band delay is 17 or 22 ms. The 5-band and two-band "MX" preset is approximately 150 ms analog audio input * configuration: stereo * impedance:> 10 kΩ load impedance, electricity balance. No hop selection function at 600 Ω. There is a perforated pad on the I / O module so that the user installs the 600 Ω terminal. * Rated input level: can be adjusted from -4.0 to +13.0 DBU (VU) * maximum input level: + 27dbu * L connection: two XLR ports, negative, EMI suppression. Pin 1 take the chassis wire, pin 2 (+), pin 3 electric balance, floating and symmetrical. * A / D frequency conversion method: 24 bits 128X times super sample rate DELTS Sigma linear phase anti-lost filter. * Filter: RFI filter, with a 0.15 Hz high-pass filter analog audio output * configuration: stereo. Flat or pre-heavy (AT 50 μs or 75 μs), by software selection. Output can be set independently to emit analog FM processing signals, diversity delay analog FM processing signals, digital radio broadcast processing signals, or low delay monitoring signals. * Original sound impedance: 50 ohms, electric balance floating * load impedance: 600 Ω or higher, balance or imbalance. No terminal, or press recommendation. * Output level: (100% peak modulation) can be adjusted from the -6 DBU peak, 600 Ω or greater load, can be adjusted by software. * Signal ratio: ≥ 90 dB, unloaded (bypass mode, weight, 20 Hz - 15 kHz broadband, refer to 100% modulation). * Cross: ≤ -70 dB, 20 Hz - 15 kHz. * Distortion: ≤ 0.01% THD (bypass mode, degrading) 20 Hz - 15 kHz Broadband * Connection mode: Two XLR-type concert, EMI restrictions. Pin 1 Adhesive Land Wire, Punch 2 (+), pin 3 electric balance, floating and symmetrical. * A / D frequency conversion method: 24 bits 128X times super sampling * filter: RFI filter digital audio input * configuration: AES / EBU is standard stereo, 24-bit resolution, stereo software selection, from left channel mono Tone, right channel mono play or full channel mono play. * Sampling frequency: Automatically select 32, 44.1, 48, 88.1 and 96Hz. * Connection method: two XLR type jacks, positive, EMI suppression, pin 1 adhesive floor, pin 2 (+), pin 3 transformer balance, Floating, 110 Ω impedance. * Enter the basic class: in -30 dBFS to -10 dBFS variation * J.17 de- to increase: software selection * filter: RFI filter digital audio output * formulation: two output, each stereo is AES standard. Output can be set independently to emit analog FM processing signals, diversity delay analog FM processing signals, digital radio broadcast processing signals, or low delay monitoring signals. The FM processing signal can be configured in the software to be flat or pre-weight to select pre-load processing (50 μs or 75 μs). If necessary, each output can apply J.17 pre-emphasis. * Sampling frequency: Software selection is freely running within 32 kHz, 44.1 kHz, 48 kHz, 88.1 kHz or 96 kHz. According to the configuration in the software, you can synchronize to 32 kHz, 44.1 kHz, 48 kHz, 88.1 kHz and 96 kHz AES 3 synchronization input or AES3 digital input. * Word Header: Software Select 24, 20, 18, 16 or 14 Bit resolution. High-pass noise tremulins can be increased, and the level can be automatically adjusted according to the word length. * Connection method: two XLR ports, EMI suppression. Pin 1 take a chassis wire, pin 2 (+), pin 3 electric balance, 110 Ω impedance * Output level (100% peak modulation): Software control from -20.0 to 0.0 dBFS. * Frequency response throughout the digital radio broadcast processing transmission chain: For the output sampling rate of 44.1 kHz or more, the frequency response from input to the DR configuration is ± 0.10 dB, 2.0 Hz - 20 kHz; constant or J. 17 pre-emphasis. The user can specify the relative time delay between the low-pass filter-wavelength 19 kHz to 15, 16, 17, 18 or 19 kHz. * FM and HD output: delay line settings depending on the analog processing channel. Once set, the delay remains constant regardless of the processing preset. * Filter: RFI Filter Digital Synchronization Input * Configuration: Any one or two signals used to make AES3 are the same as the external reference signal at the input. * Sampling frequency: Automatically select 32, 44.1, 48, 88.1 and 96Hz. * Connection mode: two XLR-shaped female ports, EMI suppression. Pin 1 adhesive electric wire, pin 2 (+), pin 3 electric balance, floating, 110 Ω impedance * filter: RFI filter composite fundamental frequency output configuration: two separate software control output level control, output expansion And the output port of the connector. The output can be delayed by a delay delay. If so, the two output ports will be delayed, and the delay cannot be applied only to one output port. * Audio Impedance: Jumper Select 0 VPP source or 75 Ω, single-ended end, floating on chassis ground line * load impedance: 37 Ω or more, do not need terminal, or press recommendation * maximum output level: +12.0 dbu (8.72 VPP). * Minimum output level: For the 0.5 dB adjustment resolution is -12 dBu (0.55 Vpp) * pilot level: software control, can be adjusted from 6.0% to 12.0 * Pilot Stability: 19 kHz, ± 0.5 Hz (10 to 40 ° C). * D / A frequency conversion method: 24 bits * signal to noise ratio: ≤ -85 dB, (bypass mode, weigh, 20 Hz - 15 kHz broadband, refer to 100% modulation, Unweightened). * Distortion: ≤ 0.02% THD (bypass mode, weigh, 20 Hz - 15 kHz broadband, refer to 100% modulation, unloaded). * Stereo separation: 100% modulation time = 3.5 Vp-p,> 60 dB, 30 Hz - 15 kHz. Modulation = 1.0 - 8.0 Vp-p,> 55 dB, 30 Hz - 15 kHz. * Linear crosses: ≤ -80 dB, main frequency band to the subband or subband direction to the main frequency section (refer to 100% modulation) * Nonlinear strings Tone: ≤ -80 dB, main frequency band to the subband or subband section to the main frequency section (reference 100% modulation) * 8 kHz band suppression: ≥ 70 dB (Reference 100% modulation) * 76 kHz & frequency conversion suppression: ≥ 80 dB (reference 100% modulation) * Pilot protection: -60dB corresponds to 9% pilot emission to ± 250 Hz (up to 2DB composite driver) * Connection mode: two BNCs, floating on chassis ground line, EMI suppression. * Maximum load capacitor: 0.047 μF (0 Ω rass impedance). The maximum cable length is 100 feet / 30 meters. * Filter: RFI Filter Subcarrier (SCA) Input * Configuration: The subcarrier input port is mixed on the composite base frequency output port, and then connects to the digital control of the composite attenuator. * Impedance:> 600 Ω * SCA sensitivity (two inputs): from 220 mV P-P to> 10 V P-P to reduce 10% emission. Two inputs can be adjusted from the rear panel and set sensitivity. * Connection method: Two BNCs, floating on the chassis grounding wire, EMI suppression. * 19 kHz Pilot Benchmark: You can enter the SCA2 input socket to provide a 19 kHz pilot reference input or as a second SCA input port. Remote computer interface * Supported computers and operating systems: Run Microsoft Windows® 2000 (SP3 or higher), XP, Vista or 7. * Configuration: Connection, modem, or Ethernet interface TCP / IP control protocol by direct cable connection, modem, or Ethernet interface TCP / IP control protocol. A suitable control demodulator cable for direct connections is available. Does not provide modems and other external devices. * Serial connector: RS232 port (3) DB-9 male socket, EMI suppression. Serial Connector 1 uses PPP to provide a direct or modem connection of 8500PC remote control applications, serial connector 2 supports communication to your computer or remote control system, by simple ASCII command management and recovery presets. Serial Connector 3 is available in the future. * Ethernet port: RJ45 female jacket is used to use the CAT5 cable 10-100 Mbps. Local frequencies are 100 Mbps, providing 8600PC remote control applications, connecting directly to your computer via a network or using a cross-Ethernet cable. Colleagues support ASCII terminals with PPP. * Ethernet standard: TCP / IP. Remote Control Interface (GPI) * Configuration: 8 Road Output, Optical Isolation, Floating * Voltage: 6 - 15 V AC or DC, Instantaneous or Continuous Voltage, 9 VDC Interfaces provide easy operation. * Connection method: DB-25 male socket, EMI suppression * Control: Users can program any eight user presets, factory presets, bypass, test tones, stereo or mono mode, Analog input, digital output TALLY output * configuration: NPN collector opening * Maximum voltage: 30 V DC, reverse polarity protection * Maximum current: 30 mA power * Voltage: 100 - 132 Vac or 200 - 264 Vac, rear panel Switch selection, 50-60 Hz, 50 Va. * Connection method: IEC, EMI suppression. Provides a separation 3-wire power line * ground: line ground wire is independent of the chassis ground, can be separated or assembled with the rear panel control key * Security standard: ETL standard under the UL certification system, CE standard. Environment * Working temperature: All operating voltage ranges from 32 to 122 ° F / 0 to 50 ° * temperature: 0 - 5% RH, no refrigerated * Size (W x H x D): 19 "" x 5.25 "x 15.5 "" / 48.3 cm x 13.34 CM x 39.4 CM display temperature indicates the penetration of the rack, from the total depth of 17.75 "" / 45.1 cm, three racks. * RFI / EMI: Programs performed according to the CENELEC program * Transport weight: 28 lbs. / 12.7 kg "
Our other product:
