Power wireless temperature TN-TS4H active wireless temperature sensor

People are now inseparable from the use of electricity, regardless of life, transportation, etc., "electricity" will be seen for everyone, and the power consumption in the daily household electricity is not very large, and it will pay attention to the safety electricity. However, it is particular to pay special attention to industrial electricity, power plants, chemical and other industries, as well as civilian aspects of airport, large supermarkets, etc. Using high voltage power equipment is in a high-voltage and large current environment, there is also an easy-to-feet node in a closed environment, so it is not able to directly monitor the temperature of the heating point, which will have a certain amount of temperature. Error, these traditional temperature measurements are not enough to meet our needs, power wireless temperature measurement gradually enters everyone's horizons, and has achieved very good results through the market. Today, we understand the temperature sensor that is most direct contact with the heating site in power wireless temperature. The TN-TS4H active wireless sensor is the product of Tyne Technology independently developed, used for temperature of the surface or contact of the high and low voltage body, such as the switch The bare point of the cabinet, the easy-to-hay node such as the busbar connection point. The main function: 1, temperature detection function, real-time detection of current temperature; 2, the power supply voltage auto-test function, real-time detection of the power supply voltage value of the sensor itself; The main parameters: Temperature measurement range: -25 degrees ~ + 200 degrees; Temperature sampling frequency: default 1 minute; Wireless transmission distance: "= 200 meters (433MHz); Battery life: 8 years; Installation method: bundling; Installation site: Mobile high pressure switchgear: busbar, static contact, cable head, etc., fixed high pressure switchgear: busbar, isolation knife, cable head and other parts. installation method: Step 1: The sensor pair also temperatures the host and the high voltage switch cabinet, Step 2: The sensor pairing temperature control host is paired. Step 3: Open the sensor switch and bundle with the corresponding temperature measurement site. Step 4: If the sensor's probe is a line lead, the probe is bundled with the tip of the temperature measurement. The power wireless temperature measurement is measured using a temperature sensor. The temperature data of the detected temperature is transmitted to the host by wireless. The temperature sensor is directly fixed to the easy-to-happening node, so that the measured data is very accurate, the temperature collects data frequency. It is also very fast, a slight temperature exception will alarm reminder, which can be repaired in time, avoiding damage to the equipment and serious accidents. Read more