"First, remove the back cover and side skirt of the thunder snake orobolo Snake game mouse, and then carefully observe and explore its chassis.
There are ten screws at the bottom of the thunder snake orobolo Snake game mouse. The size and pattern of the ten screws are different. The four screws under the foot pad of the mouse head and the two screws under the labels on both sides are ordinary cross screws, the ultra-small cross screws under the middle product label, and the two screws at the tail of the mouse are inner six-star screws. The ten screw screws not only have different patterns, but also have different length and thickness, Different screws are not interchangeable.
Thunder snake orobolo Snake game mouse front skirt removal
Thunder snake orobolo Snake game mouse front skirt lower side cover lock
Thunder snake orobolo Snake game mouse front end decoration cover removal
First remove the six screws at the front of the mouse. After removal, you can remove the front skirt of the thunder snake orobolo Snake game mouse. Pay attention to that the mouse side key lock switch is installed under the front skirt. You need to remove it carefully to avoid unintentional loss. Remove the left and right front skirts, and also remove the mouse head decorative cover with metal round mesh at the front of the mouse.
Finally, remove the six star screw in the tail of the mouse
After disassembling the ten screws at the bottom of the thunder snake oroporo Snake game mouse, open the battery compartment cover at the tail of the mouse, and then disassemble the mouse shell. However, due to the design of two internal snaps at the front end of the mouse, special attention should be paid during disassembly. First lift the tail of the mouse upward, and then gently pull the whole upper cover of the mouse backward while making a small horizontal swing, so that the upper cover of the mouse can be slowly detached from the chassis.
Thunder snake orobolo Snake game mouse internal list
When the thunder snake orobolo Snake game mouse was opened, it was found that the structure was unexpectedly complex in the small space inside the mouse. Although I have also seen the internal structure of saitike cyborg r.a.t.7 game mouse, compared with the former, the internal structure of thunder snake orobolo Snake game mouse is much more complex. In the current commercial game mouse products, the workmanship is rarely superior to the right.
Thunder snake orobolo Snake game, the mouse top cover is completely separated from the chassis
There are two wires and a group of soft cables on the top cover of the thunder snake orobolo Snake game mouse. If you want to connect with the mouse motherboard, you must first remove it from the motherboard if you want to completely separate the top cover from the chassis. However, I am very glad that the flat cable connected between the top cover of the thunder snake orobolo Snake game mouse and the mouse motherboard is not directly welded to the motherboard like some mice, but fixed with removable clips and sockets. However, due to the narrow internal space of the mouse and the limited length of the flat cable, special tools must be used for disassembly.
Thunder snake orobolo Snake game mouse cover is fully displayed
Thunder snake orobolo Snake game mouse battery compartment display
After the cable and wire are separated from the main board, the upper cover of the thunder snake orobolo Snake game mouse can be completely separated. Compared with the general mouse, the upper cover structure of the thunder snake orobolo Snake game mouse is also more complex. The mouse battery compartment is directly fixed on the main body of the mouse upper cover by four screws, and a circuit board is hidden below. If you want to disassemble the upper cover, you must first remove the battery compartment. After removing the battery compartment, you can see the upper cover circuit board. The upper cover circuit board is firmly pressed by the battery compartment cover and is not fixed with screws, so you can directly use tools to remove it.
Thunder snake orobolo Snake game mouse upper cover circuit board adopts single-sided cloth and double-sided wiring design, but this does not mean that the mouse is simple. The whole upper cover circuit board is still made of full patch parts.
Thunder snake orobolo Snake game mouse cover circuit board back display
Thunder snake orobolo Snake game mouse cover circuit board front display
The thunder snake orobolo Snake game mouse is designed with DPI to adjust the key micro motion. Due to the limitation of the internal space of the mouse, the two keys are made of small metal patch micro motion. It is also the main reason why the DPI adjustment key range of thunder snake orobolo Snake game mouse is slightly shorter and the sound is slightly dull. The DPI adjustment key board is fixed on the upper shell of the mouse by non detachable hot-melt fixation, so it cannot be removed.
Thunder snake orobolo Snake game mouse DPI adjustment button micro close-up
Thunder snake orobolo Snake game mouse RF chip close-up
Thunder snake orobolo Snake game mouse charge state indicator close up
The middle part of the circuit board of the upper cover of the thunder snake orobolo Snake game mouse is designed with a mouse wireless RF chip, which is the same as the mouse wireless receiver. The thunder snake orobolo Snake game mouse RF chip also adopts cypress cy6936 chip. Three chip mounted LED light sources are designed at the rear of the circuit board as the mouse charging indicator. Through the translucent light guide plate on the mouse, the light and darkness of each LED can be displayed without mixing
Thunder snake orobolo Snake game mouse button board fixing method and shaft seat close-up
In order to allow players to enjoy a more comfortable touch of buttons, the thunder snake oroporo Snake game mouse uses left and right buttons, and creatively adopts a new split button structure design. The rear edge of the two key plates is equipped with a shaft seat, which can be buckled into the two circular projections on the upper shell of the mouse. The mouse key plate rotates at a very small angle with these as the axis, It can be seen from the video that the front and rear ends of the key board are like a seesaw. Due to the existence of this innovative split key structure, it can bring users a more straightforward and direct key click feel. The left and right key click feel of the thunder snake orobolo Snake game mouse can even be compared with the left button of Logitech G9X game mouse, which is known as the "golden left button" among players.
Thunder snake orobolo Snake game mouse cover spare parts list
The upper cover of the mouse of the thunder snake orobolo Snake game is disassembled to a conclusion. The whole upper cover of the mouse is fixed with six screws, which can be divided into five main parts, including the upper cover circuit board, battery compartment, upper shell, left and right key boards of the mouse. The mouse motherboard and chassis of the thunder snake orobolo Snake game will be disassembled. For details, let's talk about it next.
After the complete disassembly of the top cover of the thunder snake orobolo Snake game mouse, let's look at the bottom structure of the thunder snake orobolo Snake game mouse. The thunder snake orobolo Snake game mouse motherboard is limited by the internal space and adopts a two-piece design. The front motherboard is fixed with mouse micro motion and roller mechanical encoder, and the rear circuit board is the core components such as mouse laser engine.
Thunder snake orobolo Snake game mouse cover and chassis
Thunder snake orobolo Snake game mouse button jogging close-up
Similar to the previous game mouse products of thunder snake, and the game mouse products of international well-known game peripheral brands such as Logitech, Siro (excluding kinzu Pro), Microsoft (Ie3.0 and IO1.1 only), the left and right buttons of thunder snake orobolo Snake game mouse are still made with domestic Omron white dot micro motion, model d2fc-f-7n. This micro motion is made with clear sound and simple hand feel, It has been recognized by most game players for many years.
Thunder snake orobolo Snake game mouse wheel close-up
The mouse wheel of thunder snake orobolo Snake game still adopts the mechanical encoder structure. Due to the shielding of the left key microswitch, the specific model cannot be identified. The thunder snake orobolo Snake game mouse has made certain adjustments in the roller structure, the width of the roller side skirt has increased significantly, and the light emitted from the light source LED can no longer be seen directly from the side of the roller. Of course, this also makes it difficult to take out the light source LED fixed circuit board.
Thunder snake orobolo Snake game mouse circuit board connection socket
Thunder snake orobolo Snake game mouse front circuit board display
The front and rear circuit boards of the thunder snake orobolo Snake game mouse are connected by a simple and intuitive pin method. There is no welding operation between the pin and the circuit board, which can directly separate the front circuit board from the rear circuit board. It's also very convenient for players to replace the micro motion by themselves (but it's really not easy to disassemble the thunder snake orobolo Snake game mouse). If you want to know that the thunder snake orobolo Snake game mouse uses those high-tech components, let's go on.
After the disassembly and display of the front circuit board of the thunder snake orobolo Snake game mouse, let's observe the rear circuit board (i.e. the main circuit board) of the thunder snake orobolo Snake game mouse to see if the latest flagship game mouse has any special workmanship and materials. The rear circuit board of the thunder snake orobolo Snake game mouse is fixed on the mouse chassis with screws. You need to remove the screws before you can take out the rear circuit board.
Thunder snake orobolo Snake game: front display of circuit board behind mouse
Because the circuit board behind the thunder snake orobolo Snake game mouse is located below the battery compartment and in the middle of the buttons on the left and right skirts, the internal space of the mouse is limited, so the shape of the circuit board is narrow and long. In order to save internal space, the circuit board behind the thunder snake oroporo Snake game mouse adopts double-sided cloth routing design, and all use patch components to save the internal space of the mouse.
Thunder snake orobolo Snake game mouse uses the top customized laser engine s9818
Thunder snake orobolo Snake game mouse picture description
In the middle of the square on the circuit board behind the thunder snake orobolo Snake game mouse, the top game level laser engine is fixed, which is made by anhuagao, a famous engine manufacturer. The customized model of thunder snake is s9818 laser engine. It can provide players with a sampling rate of up to 8200dpi, which can fully meet the quick operation feeling of players in multi screen splicing games. The mouse USB main control chip is the same model as that in the wireless receiver. It comes from NXP and is designed and manufactured with arm architecture. The main frequency reaches 50MHz.
Thunder snake orobolo Snake game: display on the back of the circuit board behind the mouse
Turn over the circuit board behind the thunder snake orobolo Snake game mouse, and we can see the micro USB interface that can directly transmit signals for the mouse and charge and power the mouse. The tail of the mouse is designed with two square concave contacts. The charging base transmits electric energy to the mouse through these two contacts to supply power to the built-in battery.
Thunder snake orobolo Snake game mouse optical ranging component close-up
Thunder snake orobolo Snake game mouse optical imaging component lens
Above the laser engine, there is a small component like two squares closely fitting, which is the core secret of the thunder snake 4G laser engine, the optical ranging element. The thunder snake orobolo Snake game mouse senses the imaging surface of the mouse through this component to provide players with an adjustable silent distance. A black protective lens is designed on the surface of the optical imaging module, which can protect it from dust, debris and other interference.
Thunder snake orobolo Snake game mouse chassis display
Thunder snake orobolo Snake game mouse hidden side key structure display
The design of hidden side keys of thunder snake orobolo Snake game mouse is extremely complex. Two silver side keys and internal circuits form a side key component, which is fixed outside the side skirt of the mouse. The side skirt group is connected with the circuit board behind the mouse through a flat cable. The connection between the side skirt assembly and the rear end and the chassis is a rotating shaft. When the side key is pressed, it takes these as the axis to rotate inward at a small angle. In order to limit the travel and rebound of the hidden side key, the front end of the side key assembly is designed to be fixed with screws, and a tension spring is added to help the large side key rebound. When the side key lock at the bottom of the mouse is removed, the side key assembly can be stuck, which can prohibit players from using hidden side keys.
Close up of fixed rotating device at the front end of mouse side key assembly of thunder snake orobolo Snake game
Thunder snake orobolo Snake game mouse hidden side key pressed
Thunder snake orobolo Snake game mouse button micro close-up
Remove the screws connecting the thunder snake oroporo Snake game mouse side key assembly and the chassis, and then remove the fixing screws on the back of the side key assembly to disassemble the thunder snake oroporo Snake game mouse side key assembly. When you open the side key assembly, you can see that the mouse side key is made of two metal patches integrated with the circuit board. Because the micro motion is hard and the trigger pressure is large, the mouse side key board of thunder snake orobolo Snake game adopts the lever structure design with long force arm, so that the mouse side key has a reasonable stroke and trigger feel.
Thunder snake orobolo Snake game mouse button LED light source
Thunder snake orobolo Snake game mouse side button folding soft circuit board
However, in the thunder snake orobolo Snake game, the LED light source that provides lighting effect for the mouse side keypad is not seen under the mouse jogging. What's going on? The original thunder snake adopts the folding soft circuit board design. The LED light source in the side key area is fixed under the previous circuit board. The circuit board in the mouse area of thunder snake orobolo Snake game is disassembled into two folds. Under the front burden of ensuring the user's hand feeling and visual effect, the side key module is successfully minimized.
Thunder snake orobolo Snake game mouse button component display
The back cover of the thunder snake oroporo Snake game mouse has been removed from the mouse before the main body disassembly. The back cover assembly is responsible for the length adjustment and the back arch tilt angle adjustment of the mouse tail in the whole mouse. Considering that the thunder snake orobolo Snake game mouse has an extremely precise structural design, is there an unknown secret in this small back cover? Let's take a look.
There are up to 6 fixing screws at the bottom of the back cover of the thunder snake orobolo Snake game mouse
Take off the two foot pads at the bottom of the back cover of the thunder snake orobolo Snake game mouse. We were surprised to find that there are up to 6 small cross screws hidden below. There must be a secret inside with so many screws.
The bottom of the back cover of the thunder snake orobolo Snake game mouse is fixed with a pressing plate
A set of lever linkage mechanism is hidden behind the mouse to adjust and fix the position of the back cover
After removing the six fixing screws at the bottom of the thunder snake oroporo Snake game mouse and using tools to remove the pressure plate fixed by the screws, we were surprised to see that a set of lever linkage mechanism was hidden in the extremely narrow space of the back cover of the thunder snake oroporo Snake game mouse, which was supported by the spring by pressing the tail of the back cover of the mouse, You can make the fixed snap point inside the back cover move downward and separate from the corresponding fixed hole on the rear leather rail at the bottom of the mouse, so as to complete the mouse length adjustment operation.
Back arch inclination adjustment device inside the rear cover
There is also a circular metal knob at the bottom of the back cover of the thunder snake orobolo Snake game mouse. A micro lead screw is fixed under the knob. After passing through the silk nut fixed on the adjustable back cover of the mouse, the lead screw is fixed by a small semi ring snap ring. Because there is no special micro clamp, it can not be disassembled here, However, players can fully see the operation of the back cover of the thunder snake orobolo Snake game mouse when adjusting the tilt angle.
Thunder snake orobolo Snake game mouse parts family photo“
Our other product:
