Spidriver is an easy-to-use tool for controlling the SPI device, which can be used with Windows, Mac, and Linux systems, with a built-in color screen, which shows a logic analyzer for all SPI communications, which uses standard FTDI USB Serial chips communicate with PC, so there is no need to install a special driver. The Spidriver evaluation board includes 3.3 V and 5 V power supplies with voltage and current monitoring.
If you use SPI devices (LCD panels, flash memory, sensors, LEDs), you will know the most common question is "What are you doing now?" Spidriver displays things happening on the SPI bus in real time, so no longer guess bus status. It aims to make a conversation with the SPI hardware and intuitive. Whether you are hardware debugging or something, it is very good.
Current and voltage monitoring allow you to discover electrical problems as soon as possible. The accompanying color coding wire makes the connection easy and does not require a pistogram. It includes 3.3 V and 5 V power supplies for your device, as well as a high-end current table.
Spidriver With free software (such as open source software), SPIDRIVER can control it in the following ways:
GUI
Command Line
Use a single source file C and C ++
Python 2 and 3, using modules
Who needs it, why?
If you use the SPI hardware, SPIDRIVER is required. You can directly control the LEDs and LCD displays without having to rely on the microcontroller. If you need to check, back up or clone the SPI flash, Spidriver is the ideal tool. It can read, back up, and restore standard SPI flash chips, and are supported by popular FlashROM tools. If you use a SPI sensor, you can use the programming tools used daily from the desktop to test, and calibrate them.
Want to get a picture on a graphic display?
Graphic display may be bad, so let them display images seem to be a real achievement. Spidriver is ideal for driving, testing, and evaluating different displays. Of course, Spidriver can also be perfectly fitted with the Gameduino series of graphic touch screens.
Spidriver drives the Gameduino 3 LCD panel.
Do you want to program SPI flash?
The SPI flash is very common, and By using the test clip, Spidriver can easily read and write SPI flash memory online, direct backup and restore Flash content. Microchip's microcontroller is programmed online using standard SPI pins, so the scripts needed to read or write Microchip flash are short.
Spidriver programming Arduino Pro.
LED LED light from the desktop
The SPI LED Light Belt is also easy to pick to Spidriver and can directly control them directly, this is a very interesting project! Its speed is sufficient to smoothly perform animation processing and implement the POV effect. If it is a short LED light strip, it can be powered directly from the 470 mA built-in power supply of Spidriver.
Spidriver drives the LED lamp strip.
characteristic
Real-time display to exact all times to you
SPI transmission continues with 500 kbps
USB line voltage monitor detects power problems of 0.01 V
Target equipment high-end current measurement, to 5 mA
Two auxiliary output signals A and B
A dedicated power cord. GND, 3.3 V and 5 V two
All signals use color code to match jumper color
All signals are 3.3 V, and can withstand 5 V
Using FTDI USB Serial Adapter and Silicon Labs Automotive EFM8 Controller
Also report normal runtime, temperature and running CRC of all traffic
Control all sensors and signals using simple serial protocol
GUI, command line, C / C ++ and Python 2/3 host software for Windows, Mac and Linux
Technical indicator
Maximum power output current: up to 470 mA
Signal current: up to 10 mA
Equipment current: up to 25 mA
Size: 61 mm x 49 mm x 6 mm
Interface: USB 2.0, Mini USB Connector
Be
Copyright statement: Circuit City original compilation, translated from crowdsupply, reproduced please indicate the source!
Our other product:
