July 16, 2015, Japan Tokyo, Japan - The world's leading semiconductor and solution Supplier Ruisa Electronic Co., Ltd. has launched the company's smaller R-Car Development Kit - ADAS entry-level kit. The kit uses Rissa's high-end R-Car H2 system (SOC) to help streamline and speed up the development of ADAS (advanced driving assistance systems).
The new ADAS entry-level kit extends Rissa's existing R-Car V2H-based ADAS development board, allowing users and partners to experience the high performance real-time image identification performance of Rissisa SOC, and also help to speed up the future ADAS application The development process of dedicated hardware and software solutions.
The ADAS entry-level kit includes high performance real-time image recognition processors that support OpenCV interfaces, as well as OpenGLES-based powerful graphics processing capabilities, users and partners can develop ADAS applications on a stable high-performance platform. This new kit is supported by Linux based on YOCTO distribution (also available for other R-Car evaluation boards).
Such a new entry-level kit is currently the smallest Rissa R-Car development kit in the industry, with a size of only 10 cm x10cm, and is equipped with preset interfaces and peripherals without any additional hardware devices. The main development board is equipped with 2 GB of DDR3 RAM memory, 64 MB of QSPI flash, and a Micro SD card slot. Such a small-sized development board also includes an Ethernet module, an HDMI output interface, and a camera module connector. It is equipped with an integrated expansion connector that is easily customized. Users can easily design expansion boards to easily develop new solutions. Extended connector supports interfaces such as PCI Express (PCIe), multi-purpose output, and four camera input channels to meet the needs of Panorama.
About Risa R-Car H2 SOC
The new ADAS entry-level kit is equipped with Rissa High-end R-Car H2-Slices (SOC) that provides up to 25,000 DMIPS or more operational performance, with advanced 3D graphics processing capabilities and powerful visual processing kernels. R-Car H2 uses ARM® CortexTM A-15 quad-core configuration and attaches ARM® CortexTM A-7 quad-core processors. In addition, it also uses the PowerVR Series6 G6400 graphics processor (GPU) of Imagination Technologies. The GPU supports open source technologies such as OpenGL ES 2.0 and OpenGL ES 3.0 standards. Rissa IMP-X4 kernel has real-time image processing capabilities to help system manufacturers achieve intensive visual operations. It also provides OpenCV supporting IMP-X4. R-Car H2 also supports up to four separate camera input channels, easy to implement 360 degree panoramic shooting and object identification (this is just one of the application examples of driving assistance). With the above functional characteristics, R-Car H2 integrates the advanced security concept to help developers achieve powerful ADAS features.
Product specifications
category
Function
Board
COM Express connector
SOC
R-Car H2
Be
Be
CPU
ARM® Cortex®-A15 quad-core processor
L1 instruction cache: 32 KB
L1 operand cache: 32 kB
L2 cache: 2 MB
1.4 GHz quad-core processor supports neon instructions
-
ARM® Cortex®-A7 quad-core processor
L1 instruction cache: 32 KB
L1 operand cache: 32 kB
L2 cache: 512 KB
780 MHz quad-core processor, support neon instructions
-
RAM
Built-in RAM
72KB + 4KB (+ 256KB optional)
-
DDR3-1600
2 GB (256 m x 32 Bit X 2 channel, 4 MT41J256M16)
-
QSPI flash memory
64 MB (512 Mbit, S25FL512S)
QSPI memory on alternative board
MicroSD card
MicroSD card slot
Provide additional SD host interface
Graphic
PowerVR Series 6 G6400 (3D)
Renesa Graphics Processor (2D)
Be
Be
video
Video codec module (H.264, MPEG-4, VC-1)
IP conversion module
JPEG Accelerator
Video image processing (color conversion, image extension, reduction, filter processing)
Distortion compensation module (image rendering) 4 channel
High performance real-time image identification (IMP-X4) (device option)
Be
Be
Video output
HDMI
HDMI connector (type A, 19 pin)
HDMI, replacement board connector
RGB
-
RGB888
LVDS
-
2 channels (each 4 + 1CLK dimension)
Video input
parallel
Camera module connector (34 pin plug) (1 channel)
4 channels (1 and 2 channels: 12 bits, (3 and 4 channels: 8 bits), RGB / YCBCR
interface
Ethernet 10/100 Mbit
RJ45 connector
Substitute connector: RMII interface
Ethernet AVB (GBIT)
-
RGMII (only support for GBIT)
USB
USB 2.0 host, USB-A connector (running through adapter)
2 additional channels USB 2.0
Integrated all PHY
PCIe
Be
PCIe X1 REV 2.0 (shared with SATA), integrated PHY
SATA
Be
2 channels REV 3.1, Gen2 (3 Gbps) (shared with PCIe and USB 3.0), integrated PHY
Serial communication interface
With FIFO (Scifa)
Provide 1 channel through 1 USB-UART converter at the USB Mini-B connector
3 channel RXD / TXD / SCK
(1st channel, replacement board USB-UART converter)
High speed serial communication
Interface with FIFO (HSCIF)
Be
1 channel (HRX / HTX / HSCK)
Clock synchronous serial interface,
With FIFO (MSIOF)
Be
2 channels (IIS / SPI, master / from, 6 signals)
CAN
Be
2 channels RX / TX, 2.0B version, 1Mbps
I2C / IIC
Control power management, HDMI, and external cameras (optional)
4 channels, 400kHz, master / from (2 channels 3.3V, 2 channel 1.8V)
Timer
PWM
Be
5 channel
HMI
LEDS / DIPSW
4 LEDs and 8 DIP switches at GPIO Pins
Be
Gpios
Be
Be
Depending on the function, up to 120 GPIOs (can be used as an interrupt source)
Reset
Be
Button and power
Input and output
start up
Be
QSPI or debugger
QSPI
debugging
JTAG
20-pin MIPI connector (1.27MM spacing)
Be
track
Be
Be
Low power mode
Dynamic shutdown (CPU core, 3D, IMP)
AVS and DVFS features
DDR-SDRAM power backup mode
Be
Be
power supply
power supply
12V / up to 2.5A input
Optional
V_io
Be
Generally 3.3V, special interfaces (such as PCIe, USB, SATA, LVDS, HDMI)
About Reisa Electronic Co., Ltd.
Renesa Electronic Co., Ltd. (TSE: 6723) is the preferred supplier of the world's premier microcontroller supplier and advanced semiconductor solution, including microcontrollers, SOC solutions, and various simulation and power devices. In April 2010, NEC Electronics (TSE: 6723) and Corporate Sapa Technology combined with Risa Electronics Co., Ltd., the company's business covers research, development, design and manufacturing facilities for various applications. Risa Electronics Co., Ltd. is headquartered in Japan, with branches in more than 20 countries around the world. For more information, please visit our website: www.cn.renesas.com. Technology area
Toshiba big hand pen splits, successfully pulps the market confidence
2025 will form a market size of more than 50 billion US dollars, calculation and algorithm combination is automatic driving "
77GHz Radar Signal Process Block Drawings and Applications
NXP and Alios sign strategic cooperation
Automotive assembly latest information entertainment system application design
Our other product:
