"Summary
The lithium battery recommended by senior engineers in this issue is the lithium battery equipment from five enterprises: Shangshui intelligence, Yihong intelligence, pworth, keenshi and willobo.
The high growth of the lithium battery industry driven by the new product cycle of Tesla and other new energy vehicle enterprises in the medium and short term will promote a new round of capacity expansion cycle of the lithium battery industry. Due to the strong certainty of high growth in the downstream, lithium equipment enterprises will better match the new demand in the downstream in this round of expansion cycle, and benefit from the high growth of the industry and the accelerated improvement of concentration.
The lithium battery recommended by senior engineers in this issue is the lithium battery equipment from five enterprises: Shangshui intelligence, Yihong intelligence, pworth, keenshi and willobo.
Shangshui intelligence
Recommended product: circulating high-speed pulping system
Shangshui intelligent circulating high-speed pulping system has the advantages of good consistency, low energy consumption, strong adaptability and small floor space. Its pulping time is 0.5 ~ 1.5h/batch, the production capacity can reach 20 ~ 2000L / h, and the maximum operating energy consumption is only 504kw, covering an area of 30m * 12m.
Specifically, its product features are mainly reflected in the following four aspects:
1. Ensure that the residence time of all slurry in the dispersion unit is the same through cyclic dispersion, so as to ensure the consistency of slurry;
2. The on-line viscometer monitors the change of slurry viscosity in the whole process of circulating dispersion in real time to ensure that the viscosity meets the requirements, the viscosity detection accuracy is ± 1%, and the repetition accuracy is ± 0.5%;
3. The mass flowmeter monitors the density and flow of slurry in real time in the whole process;
4. The dispersion module running at high speed adopts anodized wear-resistant treatment on the surface of cast aluminum alloy to avoid the risk of introducing metal foreign matters.
Yi Hong intelligence
Recommended product: laser die cutting and winding machine
Yihong intelligent laser die cutting and winding all-in-one machine innovatively allows die cutting and winding to be carried out simultaneously, timely adjust the distance between the pole ears, reset and re cut, and carry out closed-loop control on the alignment of the pole pieces, which has significantly improved the production efficiency, space saving, energy saving and consumption reduction, production cost, etc.
The winding idea of this equipment is that the whole machine uses a special controller to control low tension, high speed and high precision, so that the tension fluctuation is controlled within 6% and the alignment is controlled within ± 0.3mm.
In addition, the equipment also adopts a variety of deviation correction methods, which has advantages in tension precision control and appropriate matching of linear speed; The bad problem of laser section cutting is effectively solved, and the precision of laser cutting is greatly improved; The design speed of laser cutting coil is high, and the quality of laser cutting end face is high; It can be used for different width of needle and variety switching speed. It can be used for various specifications of power battery.
Puresci
Recommended products: medium temperature regenerative dehumidification runner and technical solution
Puresci dual runner (front PST, rear PSC) medium temperature regeneration low dew point solution is a revolutionary product launched by puresci after several years of material adsorption research, dynamic test and numerical simulation to solve the problems of high energy consumption and short service life of dual runner low dew point unit.
The front runner PST has higher heat and mass transfer coefficient than ordinary dehumidification materials, and still has good dehumidification effect at the regeneration temperature of 90 ℃; The rear runner PSC has made a major breakthrough in dehumidification materials and has good deep dehumidification capacity at 80 ~ 90 ℃. The combination of the two runners maximizes their performance advantages, which can save 20% ~ 30% of the energy consumption of the double runner low dew point unit.
In addition, the regeneration temperature of this scheme is lower, which will change the regeneration heating mode of double runner low dew point unit. Hot water heating and heat pump heating can be used, which is more energy-saving, and the comprehensive energy consumption can be saved by 40% - 45%.
Kearns
Recommended product: new lj-x8000 series 3D line laser measuring instrument
3D measurement of lithium battery industry - height, flatness and appearance
Keans 3dlj-x8000 series line laser measuring instrument uses microscope lens and ultra-high precision CMOS. Each contour is composed of 3200 points with a maximum repetition accuracy of 0.3um. It provides multiple types of measuring heads with linewidth from 7mm to 720mm, which can deal with a variety of detection scenarios.
At the same time, the measuring instrument also provides point cloud data and TIFF / BMP format images, which can be secondary developed. Only by purchasing hardware and loading it into the software developed by the integrator, 3D detection can be realized. In general, the new Kearns 3D linear excitation measuring instrument can correspond to various material targets, and can improve the height, flatness, appearance and other experience of high-precision 3D measurement in the new energy industry.
Willobo robot
Recommended product: "H" drive platform
Shenzhen weiluobo robot Co., Ltd. focuses on the R & D, production, sales and service of linear robot and modular standard parts. Its business scope includes linear module, coordinate robot, small slide, electric cylinder, rotating shaft, linear motor module, vkk module, electric turntable, pneumatic turntable, etc. its products are mainly used in mobile phone manufacturing, lithium battery manufacturing, laser application Solar energy manufacturing and other light industry automation equipment industries.
Willobo "H" type driving platform adopts EtherCAT communication driver and master-slave follow-up control mode, so the driving force is more balanced. The platform has the characteristics of simple structure, high acceleration, fast speed, high positioning accuracy, fast response speed and small follow-up error. This kind of platform is suitable for high-precision laser cutting, dispensing, electronic manufacturing or biological manufacturing industries.
Responsible editor: LQ, read the full text, original title: [poly innovative energy • product recommendation] Shangshui intelligence / Yihong / pworth / keenshi / willobo equipment innovation path
The source of the article: [micro signal: weixin-gg-lb, WeChat official account: high power lithium battery] welcome to add attention! Please indicate the source of the article“
Our other product: