Guide: The first two quarters introduced how to build a gateway and remote view home temperature. This issue we come to DIY intelligence switches so that you can control the status of the switch at any time, thus remotely controlling various electrical appliances.
This time we will use the RBoard development board as a controller, insist on our consistent fastest and convenient style, like wiring, and those who recognize the feet can float.
Here is our main accessories that we need to use:
Other accessories include: mini USB line X1, 9V ~ 12V / 1A power adapter X1
Plug the NRF24L01 + module into the corresponding interface on the RBOARD development board, then connect the FOCA to the overbits, the switch hits 3.3V (very important), connect the Mini USB cable to the computer.
as the picture shows:
Rboard is an integrated development board with a 4-way optocouplex isolation relay based on a MEGA328 chip, supports direct current within the AC and 30V / 10A within the 250V / 10A. This test is taken as an example of single-circuit electrical appliances, and friends who need to control multiplex electrical appliances can be added.
The hardware is so fast, and next is to install the drive and burn the firmware.
This tutorial library file download address: http://pan.baidu.com/s/1gdgjhjt (copy to the browser open) After the download is complete, decompress it.
Step 1: Rboard Drive Installation Steps:
a, plug in the MICRO USB cable to connect the computer, switch to 3.3V
b, click on my computer or computer, click to manage
c, click on the device manager, USB Serial Port will appear under the port COM
D, right-click USB Serial Port, click Manually Install Driver Software
e, click "Browse Computer Find Driver Software"
f, choose the directory of download driver, choose Arduino->drivers
g, click OK or Next, complete the driver installation
Be
Step 2: Add device ID:
a, open m.znck007.com, after logging in, click "Intelligent Switch"
b, click "Add New Socket", fill in a new name, such as "light"
c, view the list, click on the Light option, you can see its sid, and NID, this is what you need to modify in the program.
Next, use the RBOARD to burn the firmware (can modify the source code at will to achieve the function you want)
1. Put the downloaded library to the Libraries folder under your Arduino IDE directory, for example my path is: D: \ Arduino-1.0.4 \ Libraries
2, open Arduino software, choose Tools->Serial Port->comX
3, Comx is the COM number of the computer equipment manager FOCA
4, choose Tools->board->ardeno Duemilanove W / Atmega328
5. Copy the source code inside the Kaiguan file (available in Notepad) to the Arduino program interface
6, modify the SID and NID in the program to the new SID and NID
7. Click on the first compile button on the left. If the program compiles successfully, click the second download button, start the download program.
At this point, the hardware and procedures of the gateway have been completed, and then the RBOARD controller is connected to the fire line of the electrical circuit, the principle of wiring is shown in the figure:
Be
This time we use a light tube to demonstrate, cut the fire line in a suitable position.
Receive the cut lines to NO0 and COM0, and then connect the light tube.
Be
Finally, connect the RBOARD to the power supply, connect the plug of the light pipe to 220V, and complete the wiring.
Finally, the networked test:
A, first, connect the gateway to the gateway, plug in the power adapter, the LED on the iBoard starts to flash, this shows that there is a network.
b, open the smart game controller m.znck007.com with your mobile phone or PC page, and log in to your account
c, click the "Light" icon inside "Intelligent Switch", when the icon changes "ON", it represents to turn on the lamp. At this time you can see that the light pipe will illuminate. When the icon becomes "ON" to "OFF", the lamp will go out.
Be
Bamboo
Creative studio
[Activities] Participate in the panel essay activities, win the intelligent prize!
Our other product:
