Soundcraft EFX Series
The EFX series multi-purpose mixer has Soundcraft outstanding sound quality, excellent features and unparalleled cost performance, EFX series built-in broadcast-level US Lyson effect. Applications include small venues, meeting rooms, live recording, live performances, fixed installation systems, and radio stations. In the configuration of the 8th and 12-way single-channel input, the EFX series mixer can be inserted into the Lescon 24-bit effect, offering 32 world-class reverb, delay and chorus effects. If users like to use an external effect processor, then three EPM series mixers entered with the 6th, 8th and 12-way single channels, you can use the second AUX assisted to send the FX sending inside the EFX. All EFX mixers have 2 standard stereo channels. When the rack is installed, use the audio connector located at the top of the panel, install the options, and the EFX mixer can easily change to the rack installation, each mixer occupies the standard rack space of the 8U height. The EFX mixer provides a capacitive microphone to provide a + 48V professional phantom power supply, using the same GB30 microphone preamplifier. GB30 is a patented technology for the Soundcraft GB series large mixer, with a very clear voice, extremely low noise, and has overload control characteristics. More than 30 years of experience in manufacturing professional mixer, the UK Soundcraft is equipped with all specializes in modern tuning applications for EFX mixers, and also creates organizational intuitive control interface to enhance the sound engineering experience. The peak LED indicated on all input channels can further improve the occurrence of monitoring noise feedback. These input channels are input from multi-point pickup signals. The LED displays the input signal level, when the level signal is close to the peak, indicating that the input signal level is close to the saturation level. In addition, the main body sound mix has a 10-segment LED level meter, activated by the PFL (in front of the fader), indicating the level of the channel in the work. Features: • Built-in Leskang 24 Bit Effect • Observe the LED of the Signal Level, Monitoring Signal Level Status • Precision GB30 Microphone Pre-Amplifier • Provide a real professional + 48V phantom power supply for capacitive microphones • External effects Insertion Point • Mixer Input Channel Specifications 8/12 • AUX Send All Switching to Defensive Before or after the Flexo • FX Send • Built-in World General Power Supply Technical Specifications Frequency Response Microphone / Line Enter to any Output 10 ± 1.5 DB, 20HZ - 20KHz Total harmonic distortion + noise spool sensitivity -30db, mix output + 14dbu<0.02% @ 1KHz noise microphone input equivalent noise EIN (maximum gain) -127dB (original impedance 150Ω) AUX, MIX and The main control is in 0dB (the decrease in the lower end). 1881. -84DBU channel routine (1KHz) channel mute. 1882.90db fader closed (reference sign +10). 1882.90dbaux send port close. 1882.83dbeq (mono Input) HF12KHz ± 15dBMF (sweep) 150Hz - 3.5kHz, ± 15dBLF80Hz ± 15dBq (MF) 1.5EQ (stereo input) HF12KHz ± 15dBmF720Hz ± 15dblf80Hz ± 15dBq (MF) 0.8 consuming power AC power supply below 35W Working conditions Temperature range 5 ° C ~ + 40 ° C Input / Output Level Input Maximum + 15DBU Line Input Maximum + 30DBU Stereo Enter Maximum + 30DBU Mixed Output Maximum 20DBU Headphone Output (150Ω) 300MW Input / Output Impedance Microphone Enter 2kΩ Line Input 10kΩ Stereo Input 65kΩ, 35kΩ output impedance 150Ω, 75Ω size (width x height x deep) EFX8330mm x 91mm x 362mmefx12432mm x 91mm x 362mm weight EFX84.6 KGEFX125.8 KGEFX8 / EFX12 file
Our other product:
