TBL5016-1 16A Linear Impedance Stabilization Network (LISN) 9K-100M CISPR16-1-2TBL5016-1

Overview TBL5016-1 50μH LISN is an apparatus required to provide a direct current or AC power supply electronics measurement. It is based on CISPR The 16-1-2 and MIL-STD-461F standards are designed with a frequency range of 9kHz to 100 MHz. In addition to conducting conduction noise measurements, LISN is also used to establish defined impedances for a variety of other standardized tests. Lisn is a single-line design of 50Ω / 50μH + 5Ω, with high current jumpers, short circuit 5 OHM resistance, and configure it to 50Ω / based on CISPR 16-1-2 50μH Lisn. The LISN's characteristic frequency is up to 100 MHz, which means that LISN can be used for 9 kHz to 100 The combination of MHz. LISN is inserted into the power cord of DUT. Spectrum analyzers or measurement receivers can be used at the BNC connector to measure the conduction noise in the power terminals of the DUT. The source (power supply) terminal and the DUT terminal are decoupled by 50 μH inductance. DC or single phase measurements typically require a pair of TBL5016-1. It is used in conjunction with Tekbox Lisn Mate to measure common mode and differential mode noise respectively. DUT with three-phase power supply requires three or four TBL5016-1, depending on that the product is provided in triangular configuration or star configuration. The device is equipped with BNC public RG232 cable, a pairing connector, a large current configuration jumper and a ground bracket to connect it to the ground layer. Product features: Compliance with CISPR-16-1-2 Simple and convenient design Application Parabye test

Our other product:

Professional lightning protection system for Tower	Professional FM Radio Station Equipment Package	FMUSER FU-1000C 1000W FM Transmitter With USB Audio Input Interface
FMUSER 200W FM Radio Broadcasting Package	Hotel IPTV Solution	FMUSER FSN-1000T V5.0 1KW FM Radio Broadcast Transmitter