TEKBOX RF Broadband Amplifier Overview Tekbox

TBWA2_20DB, TBWA2_40DB N EMC probe amplifier N universal broadband radio frequency amplifier The TBWA2 broadband RF amplifier is a multi-function module that can be easily integrated into the lab settings, with bandwidth of the frequency range 2MHz to 6GHz, which is ideal for enhancing the signal picked up by our EMC near field probe. The TBWA2 broadband amplifier provides 20DB or 40DB gain. TBHDR1 n General gain module N low noise and high IP3 requirements pre-annoying N EMC Consistency Prediction (Spectrum Analyzer Front Amplifier) N ring antenna amplifier TBHDR1 is a high dynamic range amplifier with a frequency range of 30kHz to 1.5 GHz. Its gain characteristics are as high as 6 GHz. TBHDR1 has a high IP3 and low noise coefficients that make it an ideal replacement preamplifier for the spectrum analyzer and receiver in an EMC test application. It can also be used as an amplifier of an active annular antenna due to its low noise coefficient, high IP3 and low to KHz range. TBDA1 / 14DB, TBDA1 / 28DB N-RF drive amplifier N universal broadband radio frequency amplifier The TBDA1 broadband drive amplifier is a module that builds multi-function and can be easily integrated into the lab settings. The output power of 40 MHz to 3GHz and 1dB is + 22dBm, which is ideal for increasing the amplitude or drive power amplifier level of low power RF source. TBDA1 broadband amplifier provides 14DB or 28DB gain TBMDA1 N EMC consistency radio frequency immunity test (with drive EMC probe or TEM chamber) N-RF drive amplifier N universal broadband radio frequency amplifier TBMDA1 Modulation Broadband Drive Amplifiers are designed to create an inexpensive signal source for an antisense test of electronic products. It is designed to drive from the tracking generator of the spectrum analyzer. With its 22 dB gain and + 22dBM 1DB compression point, it can boost the output power of the tracking generator to 150 mW. TBMDA1 is ideal for driving TEKBOX near field probe to find the sensitive point of the electronic circuit when driving Tekbox Tem Cell TBTC1, generating an electric field up to 50V / m, in which the driving TBTC2 is generated as a power field of up to 25V / m, which is as high as driving TBTC3 18V / m electric field. The test signals for the immunity test can be CW, AM or PM. Therefore, TBMDA1 provides a built-in modulation function to generate 1 kHz / AM or PM signal. In PM mode, TBMDA1 can also generate a signal of 12 Hz-217 Hz. TBMDA2 n General gain module N EMC immunity test signal source, driving near field probe N EMC immunity test signal source, drive TEM chamber TBMDA2 Modulation Broadband Drive Amplifiers are intended to create an inexpensive signal source for an antistatrical test of electronic products. It is designed to drive from the tracking generator of the spectrum analyzer. With its + 27dBM 1DB compression point, it can boost the output power of the tracking generator to 500 mW. TBMDA2 is ideal for driving TEKBOX near field probe to find the sensitive point of the electronic circuit when driving the Tekbox Tem Cell TBTC0, producing an electric field up to 170V / m, and generates an electric field that produces up to 100V / m, generates 50V / M Electric field, generating 30V / m electric fields when driving TBTC3. The test signals for the immunity test can be CW, AM or PM. Therefore, TBMDA2 provides a built-in modulation function to generate 1 kHz AM or PM signal. In PM mode, TBMDA1 can also generate a signal of 12 Hz-217 Hz. TBMDA3 n General power amplifier N EMC immunity test signal source, driving near field probe N EMC immunity test signal source, drive TEM chamber The TBMDA3 modulated broadband drive amplifier is designed to create an inexpensive signal source for the immunity test of the electronic product. It is designed to drive by the tracking generator of the spectrum analyzer, the input power range -5dBm ~ 0dB, can increase the output power of the tracking generator to 5W. TBMDA3 is ideal for driving TEKBOX near field probe to find the sensitive point of the electronic circuit when driving Tekbox Tem Cell TBTC0, generates an electric field up to 550V / m, and generates an electric field that produces up to 300 V / m, generates 150V / M Electric field, generate a 100V / m electric field when driving TBTC3. The test signals for the immunity test can be CW, AM or PM. Therefore, TBMDA2 provides a built-in modulation function to generate 1 kHz AM or PM signal. In PM mode, TBMDA1 can also generate a signal of 12 Hz-217 Hz.