If you are a computer DIY player, it is estimated that this brand should not be unfamiliar with the brand, because the power of the TT also has a relatively high cost performance. Of course, this brand chassis is actually good quality. In terms of shape and work, it is high in the same price chassis. Therefore, after this time I get the THERMALTAKE challenger H3 chassis, I specially made a review, this evaluation Performance from a plurality of angles such as shape and practicality.
Welcome everyone to exchange in the comment area, or vomiting.
【shape】
In my thinking, the electrical host often distinguished, and in black as the main tone. Therefore, for the euphratist player, the shape of the TT challenger H3 chassis may not be so cool, but for users who just want to buy a good-looking and easy to use the chassis, the shape of the TT challenger H3 chassis can be called high. Color value. First, I saw this chassis, white background, with gray high-resistance wave waves, plus the front curve of the chassis, more soft, less sharp but more beautiful, the first feeling is very Comfortable.
As a central tower chassis, the TT challenger H3 chassis is not small, 408 x 210 x 468 mm plus 7kg weight, the whole is very thick and strong.
And this chassis is most attractive to a whole piece of magnetic steel glass, which uses glass material to make the internal hardware lights clearly visible, and such magnetic design can be more convenient when the installation is convenient, ready to open close. This feeling is like a wall in front of the house, although there is a glass on the wall, but suddenly giving you a floor window, not only the horizon is more beautiful.
The TT Challenger H3 has a 120mm / 140mm fan bit, which can be installed 240mm specifications, and the magnetic dust-proof net is very convenient to clean the dust cleaning, and it is a good look and practical design.
In the back of the TT Challenger H3 chassis, there are some honeycomb well designs, which allows users to make up and down when installing the fan on the back.
In addition, there are many openings at the bottom of the chassis, which guarantees that the entire chassis has a very good heat dissipation effect. In order to prevent slipping and scratch-raising flooring, there are also rubber non-slip pads in four corners of the chassis.
[Internal structure]
The interior of the TT challenger H3 chassis is comparing the traditional ATX chassis structure. It looks comparison, compatible with the ATX, M-ATX, Mini-ITX type motherboard, and the graphics card length supports 350mm, and the CPU radiator is limited to 180mm. Because I am using a small motherboard, put the motherboard into it, you can see there is a large vacant space in the entire chassis, and the whole look is very empty. If you use a big board, you can just satisfy your needs.
The general motherboard can be used, and the PCI expansion slot has a total of 7, and it is also a need for a general ATX motherboard. Each expansion slot has a barrier that can be disassembled.
As for the power supply, it is a very common lower design. The TT challenger H3 chassis also has a stand-alone power bin with a maximum of 180mm power. Because the window design is used, it can be seen from the outside when used.
On the power bin, there are two hard drives, supporting a 2.5-inch hard drive, and is fixed using the hand screw. If the two hard drives are not installed, you can also put your hard drive into the power store, and its power bin has 2 3.5-inch hard drive. It is because it is reasonable to optimize space, so four hard drives can be easily loaded.
【Material】
In terms of the selection, the TT challenger H3 chassis is more intense. It uses 0.8 mm SPCC steel to create, and it is very reliable on durability. If it is placed at home, the general item impact will not have much impact. The side glass is used as tempered glass, so although it is fragile, it is actually very secure.
The wavy panel is the transparent plastic material used, but I tried to use the key to draw on the top, leaving a scratch or more rare, at least for a while, the panel has a scratch.
【summary】
In general, the TT challenger H3 chassis is still a comparative price, although the electricity is not rich, but I am not an electricity, I have a soft curve design, I feel more beautiful. In addition to the side of the tempered glass design, the internal hardware RGB lamp will be very beautiful.
The TT Challenger H3 The internal space structure is reasonable and there is a lot of space in the panel, so when it is installed, it will not shrink the foot. In addition, there are many heat-dissipation positions, which can be guaranteed when using this chassis, the performance of the host can be played well. Read more
Our other product:
