The X9S series mains 2000 million soft light double photo, the front 20 million pixel main camera + 5 million-scented scenic spot camera, join the global soft light, extend the application scene of filling the light; the rear camera is 16 million pixels, support PDAF phase focus .
Configuration: VIVO X9S is equipped with a 5.5-inch full HD screen, and the processor is upgraded from the Snapdragon 625 to the Snapdragon 653. The CPU / GPU performance is enhanced, supplemented with 4GB RAM + 64GB ROM, and the battery capacity is also increased from 3050mAh to 3320mAh.
In the seemingly unchanged form, Vivo X9S has built-in Snapdragon 653 processor, a larger capacity battery, as for the upgrade, we may wish to explore.
Let's start our dismantling, take a look at it first and remove the SIM card. The SIM Cardo section has a lap rubber, mainly used to live waterproof. Vivo X9s can insert two NANO SIM cards to support three major operators 4G + networks.
Vivo X9S is designed with a full metal body, with a thickness of only 6.99 mm. The panel treatment of the side, allowing the product to be thinner and more stereoscopic. The bottom is fixed in two hexagonal screws, and the other portions use a snap connection.
The author is a hard work of Jiu Niu two tiger successfully separated the metal rear shell and middle box, almost no assembly tolerance. The Vivo X9S has a full metal package compared to the back glass.
The metal rear shell is covered with a guide graphite layer, and there is no wire connection between the middle frame. It is carefully seen that there is a 3M sealing glue at the binding, and moisture can be prevented during daily use.
There is also a circle package package in the periphery of the battery and tail plug. Under the heavy guard of 3M sealant, basement of the foam, Vivo X9S is sufficient to deal with general strength splash water. Of course, this also means the use of materials, and the difficulty of maintenance is increased.
It is worth mentioning that the Type-C port at the bottom of Vivo X9S has a rubber ring filler with a rubber ring, and can avoid loose and durability in a certain extent.
Next, the motherboard portion is dismantled, the battery, the surface of the motherboard cover the large graphite thermal conductive layer, and the cable metal baffle can be seen after being torn. Screw all the screws of the fixed motherboard, disconnect the power, the screen, etc., and the two RF coaxial lines.
The routine layout of "Motherboard + Battery + Deputy Edition" is used, and the motherboard is distributed with Snapdragon 653 chip, 4GB RAM + 64GB ROM, audio decoding, power management, envelope tracker, etc., the shield surface has a conductive copper foil Accelerate heat dissipation.
Vivo X9s uses a solder-type single-layer shield, which facilitates reducing stacking thickness and cannot further disassemble.
The mobile phone uses the front double-fitting scheme, 2 megapixel +5 million pixels, can realize the equivalent aperture of F / 0.95-F / 16.
The rear camera is 16 million pixels, 1 / 2.8-inch photosensitive components, support PDAF phase focus technology.
Then we started to remove the battery, X9S battery and the designs of many mobile phones are not too large, using non-adhesive sticking to the middle box, can lift the battery according to the prompt.
In terms of the battery, Vivo X9S's battery capacity increased from 3,000 mAh of Vivo X9 to 3320mAh, while the body size is basically consistent. In addition, X9S also supports 24W fast charge.
Then we started to remove the tail, the tail cutting board covered a lot of bubbles used to fill the gap, so that the body is not easy to loose, and it also plays a certain dust-proof and waterproof.
The 3M sealing glue between the battery and the tail plug is effectively protects the battery when the machine is not careful.
In addition to the few screws that are easy to see, three screws are hidden under the foam in the pm.
After the screw is removed, you can easily remove the speaker module.
Remove the plug of fingerprints, touch screens, and tail plugging in turn, and then remove the headphone module.
Now some smartphones give up 3.5mm headphone interfaces are not uneven, after all, they account for a lot of internal space. After giving up it, you can add battery capacity or put other new features.
Summarize
In addition to the separation of the rear shell and in the middle frame, the overall dismantling difficulty of Vivo X9S is not large, and only a little bit is patient.
In terms of work and materials, Vivo X9S is also more solid, metal rear shell, battery bin, sub-plate and SIM card slot, have a large amount of waterproof and soaking cotton, metal rear shell and motherboard surface cover large area graphite thermal conductive layer, Conservative control.
Our other product:
