I have always used ordinary cat + wireless routing, cat connection route WAN port, LAN port other desktop computer, mobile phone or laptop via wireless Internet access. Recently, telecommunications calls my points have arrived at 3000, you can install IPTV for free for free, 30 pieces a year after a year. I agree with the mentality why you don't want it.
When I installed it, I said that I would take 100 yuan to buy Telecom multi-cart, I think I can get it, I don't want, I don't know when I installed IPTV. I tried it from routing. There is no way to test the dialing test of the cat's dialing. After the installer left, I started to consider how to connect the most convenient.
First of all, I want to guarantee the Internet, first press the network cable, restore the original look, then I first consider how to connect the route LAN port can also see IPTV. I saw the top box, Huawei EC1308, found its setup password and save password online, set a wired connection after entering, select DHCP (routing DHCP), save after saving, success, can see IPTV.
But my purpose is to wirelessly connect IPTV, so I use the TP-Link TL-WR700N wireless AP used to travel when the hotel is wireless online, set bridge mode, and my wireless router bridge (setting mode online), then Use the network cable to connect the TP-LINK TL-WR700N to the set-top box, the set top box or set a wired connection DHCP, and you can see IPTV normally after restart. (I am a broadband home, do not have ADSL cats, cover the whole family with DLINK DIR618 wireless router, connect the top box and DLINK wireless router with the TENDA 810R portable wireless router, can connect to the TV. DLINK wireless router normally. DLINK wireless router Dial, No need to re-dial and watch TV, although it takes up the same bandwidth, I don't care ---- editor Note)
At this point, I thought I have already gotten it, I still want to connect directly to the route, I don't get it? Later, I thought, wrong, IPTV originally dialing is independent bandwidth, is this setting not occupying the ADSL's bandwidth? I immediately checked, and the ADSL's bandwidth, about 2m, although I used 6M bandwidth, but I always feel uncomfortable. So I took the net line from the cat to the LAN port of the route, the computer dialped online, OK, no problem, the computer can access the Internet, then set the wired connection PPPoe, and you can see IPTV after dialing, test, computer bandwidth 6M, IPTV bandwidth 4M, separately with separate bandwidth. If some friends use only 1 computer, and there is no other wireless devices, they can be used, and I have another computer, and mobile phones, notebooks, game consoles, etc. need wireless connection to the Internet, so This method is not suitable for me.
As needed, I took a wireless routing again B, the SSID of the routing B called SSID2, and the original route called it routing A, SSID called SSID1. First, the line comes out of the line is connected to the LAN port of the route B, then the route of the WAN port connection route B's LAN port, other computer connection route A Internet, wireless Internet connection SSID1, and IPTV set-top box Set wired connection PPPoE, wireless AP bridging SSID2 Dachel. To put it bluntly, I am using a wireless routing into two dial ports of the cat and wireless port.
Since I said the evolutionary version, how can I have so many devices, so many connectors get it, so I have to evolve. First simplify the wireless AP, I called Huawei, I would like to ask him that the EC1308 supports what wireless network card. As a result, they say this is a custom version, ask for telecommunications, no way to find it, online saying TPLINK has a support, I asked I have already stopped production, I saw that there was a happy light A3 also supported, and the price was not very expensive, I bought a try, plug in the EC1308 USB port, set the wireless connection, wireless settings to select Search, if I don't support anything, the result is a smooth search for my SSID2, select PPPoE, and successfully start. If you don't know what wireless network card is supported by your own set-top box, it can only be connected with a wireless AP.
Following down to simplify the cat and routing, I didn't want to telecom, I didn't want to telecom. Because I still have to crack, I directly found a broken telecommunications ZTE H108L, setting method "baby details" generally Good teaching, I just said the problem I have encountered. Because the IPTV VCI VPI in most parts of the country is 8/85, so there are 8/85, but I am different from Guangzhou, IPTV is also 8/35 as INTERNET, so I have to put the original 8 / 85 and 8/35 are deleted, then build two 8/35, an internet, an Other. There is also a problem, some people may come directly, but my iptv's SSID2 is not even, helplessness has to adjust two SSIDs, which is the original SSID1 Internet, bind Lan134, SSID2 pick IPTV, bind Lan2, I am now Changed to SSID1 Binding LAN2 Picking IPTV, SSID2 Binding LAN134 is used to access the Internet, because SSID2 cannot change the password directly, so it can only be more helpless. I hope that friend can help solve this problem, I believe that as long as I remove the SSID2 password, it should be.
Some friends may want to install IPTV, but I feel that it is too much to be too trouble, I hope that this experience will help you.
Our other product:
