Wireless router antenna production, router antenna
Keywords: Wireless router antenna production
Wireless router antenna production
Wireless brings us more convenient network connection, but wireless is still in use, and the transmission distance is one of them. If the two antennas made are parallel, the transmission distance can reach 1 km or more. .
After reading this collection, you have a sense of arrogance? Let's start. . . . ^^
The theoretical transmission distance based on 2.4GHz 802.11b wireless protocol is about 100 meters, 300 meters outdoors. However, in practical applications, the coverage of wireless signals is more limited due to interference and object blocking, etc.. The state has certain restrictions on the transmit power of the wireless local area network equipment, so the manufacturer is not likely to provide better signal strength by increasing the transmit power of the device. If you want your wireless access point to override a broader area, or have a longer data transfer distance in a single direction, it is a good solution for the installation of additional antennas for wireless devices. In the market we can buy an external antenna produced by wireless vendors, but its price is more expensive. I don't think this thing is worth a value? Then we do one, that is, save money and DIY fun, why not? Although radio technology is very unfamiliar for many people, this time the 2.4GHz antenna does not require you to be proficient in wireless technology, in addition to the data we provide, you will use electric drill, scissors, and iron iron. It is enough to cope.
Making an antenna with canned box - Prepare tools for work. The tools we need to prepare are: electric drills, saws, iron iron, files, sandpapers, and dry knives. If there is no electric drill and saw, it is also possible to work if you find a sharp big scissors; can be replaced with sandpaper, 200 or 400 mesh sandpaper can be used. Iron iron is probably an indispensable tool. If you don't want to automatically use it, it will usually provide welding service in places where selling wireless plugins, but hand-charged may be higher than your own accessories.
Making antenna with canned box - Preparing for material canned box in this part, there is no strict specification requirement. Usually, try to use long and large metal cans. Before starting the transformation, it is best to tear off the above label and clean it, and we use a tinkklet with a Nestlé coffee.
Copper wire copper wire is used as antenna. Needless to have a lot, about 5 cm is enough. The copper wire we use is peeled out from 1 square single copper wire, which is just inserted into the joint.
In the production process of the insulating tape, the canned box will take a portion of the canned box, even if it is used, after the sandpaper is polished, the fracture is very sharp. Use the insulating tape to wrap the can sharp edges to make your production process more secure.
A 50-ornate connection is required between the feeder antenna and the wireless access point. According to the brand, the quality is different, the price of the feed is much different. Some of the more than 80 yuan, a general approximately 40 yuan, Beijing's words can find a lot of sales boots in the electronic market on the Sichun Road. If the distance between the antenna and the wireless device is far, it is best to buy a feeder of your point, and the signal loss will be dot. If you can't buy a feed, you can use 75 Euro TV with a shaft cable instead, and it can be used in the premise of distances.
Partially exciting content next page Next
Our other product:
