I look forward to a long time, I finally started to the new generation of Z10 of the BlackBerry, and the cleanliness unloaded eight pieces, and gave to the internal world of the new blackberry.
The battery's battery is unable to disassemble this year. The Z10 can not only be dismantled, but also charge the phone and the spare battery.
However, BlackBerry also warned that it is best not to remove BlackBerry Z10, because there are some small parts in the inside that maybe you accidentally give it in the inhalation - it is really when you can eat it.
Right Interface Micro USB 2.0 (Charging / Data Synchronization), Micro HDMI (Video Output).
The top is the power button and the headphone interface. iFixit said that they like the headset interface at the top, individuals agree
Open the back cover and deal with most of the smartphones, which is similar, making the buckle.
The NFC antenna is integrated on the back cover, similar to Samsung Nexus S.
In order to avoid traces between the back cover and the main body, the NFC antenna is designed with two metal contact points on the back cover, and there is a corresponding two spring contacts on the motherboard.
Because the battery is not in the mobile phone, you have to remove it first. Is it very awkward?
Battery specifications 3.8V, 1800mAh, lithium ions, standby for up to 13 days, 3G calls up to 10 hours.
As contrast, Nexus 4 3.8V, 2100mAh, 3G calls up to 10 hours; iPhone 5 3.8V 1440mAh, 3G call up to 8 hours. Z10 wins.
Screw all the screws on the middle plastic bracket.
Do you think this is it? Blackberry has also designed a hidden screw in the middle, and must be opened to see it. you are vicious.
Get it, you can take the bracket and see the motherboard.
It is worthy of that the BlackBerry does not use any binder when the motherboard is fixed, only two joints. This is a good news for disassembly repairs.
The rear camera is easy to take it down from the motherboard. 8 megapixel, autofocus, F / 2.2 lens, stand-alone ISP processor, 64MB buffer, and backlight sensor to enhance low light shooting performance. The back number PCB-49527-005.
The back of the motherboard (that is, when dismantling, see the first side) The main chip is:
Middle Red: Samsung KLMAG2GE4A 16GB MLC NAND Flash and Controller
Rate Orange: AVAGO ACPM-7051 Four-band GSM / Edge, Dual-band UMTS (B1 / B5) Power amplifier
Right, Yellow: Inside Secure Secure (Inside Secure) SecureAd 972-DC-C6 NFC Module
Left green: high pass WCD9310 audio encoder
Left Purple: Semiconductor LSM330DLC 3D Accelerometer / 3D Gyroscope
On the left blue: STMicroelectronics LIS3DH Triaxial MEMS Acceleration Gauge
The main chips of the motherboard are:
Right Red: Samsung K3PE0E000A XG2GB Mobile DDR2 Memory, Gaotong Snapdragon S4 MSM8960 Processor / Baseband (Integrated Package)
Intermediate Orange: High-Tong PM Power Management IC
Zhi Yellow: High-pass RT multi-band multimode RF transceiver (also used by Galaxy S3, IPHONE 5)
Rayile Right Green: Texas Instrument WL1273L Wireless Module (Wi-Fi 802.11b / g / N, WLAN, Bluetooth, FM)
Right down blue: Triquint TQP6M9017 Dual-band WLAN module
Left purple: RF Micro Devices (FRMD) RF7252 Linear Power Amplifier
Left black: AVAGO ACPM-5017 LTE frequency band 17 power amplifier
After reading the motherboard, you will prepare the display. Just deal with a few small screws and a little glue.
Pull open the front, perfect mirror.
The display is a super thin and high integration. The digital converter is directly on the glass, and is integrated into the LCD.
A bad side is that once the surface of the glass is broken, the touch screen is gone. It is fatal from the height of ordinary people to the cement floor, and the glass is not a gorilla, a new hardened glass.
Three lines, guess, respectively, corresponding to the LCD, digital converter, and backlight.
The capacitive touch controller is Synaptics ClearPad 3203. Various fresh gesture controls on Z10 is done by it.
The main body of Z10 is not cumbersome, but it is still necessary to take a variety of discounts. Headphone interface, power switch, ambient light sensor, and earphones are tightly fixed together.
The vibration motor is fixed and strong.
All parts are collectively taken.
Our other product:
