XP8080 / XP 8080 M8 into 8 out digital speaker processor
UXP8080 / XP 8080 M8 into 8 out-of-digital speaker processor XP series is a 96KHz sampling rate, 40-bit floating point operations DSP and 24-bit high-efficiency modes / numbers, digital / mode transformations Usb interface; RS232 interface and standard Ethernet interface; 650ms delay, 31 paragraphs, equalization, full-feature filter (maximum 48dB), and filter (maximum 48dB) and compression / filter (maximum 48dB) and piezoelectric filters; The channel is configured to 650ms delay, 8 parameter equalization, full-featured filter (maximum 48dB), and peak limiter. Compared to the XP series, the XP series: The XP series is not equipped with an FIR division filter and a AES / EBU digital interface. However, the excellent price performance of the XP series is the first of the professional installation and mobile performance market. XP 8080M (a pre-amplifier of a 48V phantom power microphone / line) at each input channel. Users can implement separate regulation of the function module parameters for the XP series on the panel; you can also use the XPSole software on your computer, connect the XP series digital audio processing through the Ethernet IP address or RS232 interface (required to install the driver). The control of the unit, within the same network, up to 16 processors and X-series control panels can be accommodated. Features: Input / output · 8 into 8 out · Adopt Phoenix input / output interface · Enter impedance: >10kΩ · Input impedance: >10kΩ · Maximum Sound stage: + 20dBU · Mode: Electronic equilibrium analog audio efficacy · frequency response : +/- 0.1dB (20 to 30 kHz) · Dynamic range: 115db Typical (unweighted) · common mode suppression ratio: >100db (50 to 10kHz) · crosstalk: < -100dB · Distortion: 0.002% (1KHz @ + 4DBU) Digital audio power · DSP: 40-bit floating point operation unit · Sample rate: 96kHz · ADC / DAC: 24-bit high-performance chip · Transmission delay: 1.5MS; audio adjustment parameter · Gain: -40 to + 15dB, 0.25dB / Level · Phase: +/- · Delay: Each input / output maximum 650ms balance · Balance: Each input / output, 8 balance mode: parameter balance, high pass, low pass, Phase-1 and Phase-2 · EQ gain: -30 to + 15dB, 0.25dB / grade · EQ bandwidth: 0.02 to 2.50 oct (q = 0.5 to 72) · Illustration balancing: 31 paragraphs equilibrium per input, 1/3 oct each level Division Parameters · Each input / output 2 Division filter · Mode: Butterworth, Linkwitz Riley, Bessel · Peak: 6 to 48dB / Octave Bi / ORP / LMER · 1 compression per input configuration · Each output configuration 1 limiter • Threshold: -20 to + 20dBU • Response time: 0.3 to 100m · Release time: 2 to 32 times the response time: 1: 1 to 1:40 (only the pressure limit device only) System Parameters • Setting Storage Number: 30 · Time: Mill Second, Feet and Mi · Frequency Unit: 36 / OCT or Each 1Hz · Security Lock Function: Password Protection Mode · Channel Name Length: 6 Character Front Panel Configuration · Display: 2 lines 16 Characters Backlight LCD · Level Display: 5-bit LED · Buttons: Mute Keys and Channel Menu Keys, 16 · 6 Menu Item Control Buttons · 1 Parameter Adjust Key Interface · Analog Input / Output : EURO / PHOENIX · Digital Interface: 25 Pins DB-25 (AES / EBU) Fauten · RS-232: DB-9 Female · USB: B Connector · Ethernet: RJ45 (extended wireless connection via wireless router) · Power supply: Standard IEC socket overall specifications · Power: 90-265 VAC (50 / 60Hz) - 20VA · Size: 19 "x1.75" x9 "(483x44x229mm) · Weight: 10 lbs / 4.6 kg
Our other product:
