Name, the cost of light cameras is equivalent to a few Xiaolong 855 Xiaomi CC9 PRO, in the end, how is it? Now, official dismantling has been released.
It is reported that Xiaomi CC9 PRO will take 100 million pixels. This is the first five-time mobile phone in Xiaomi. It is also the most powerful millet taking photo / video mobile phone so far, and won the DXOMark.
At the core configuration, Xiaomi CC9 PRO uses a two-curved flexible screen, equipped with Qualcomm Snapdragon 730G mobile platform, with 8GB memory + 256GB storage, 32 million pixels, battery capacity is 5260mAh, support 30W flash.
Be
After heating, open the back cover, you can see that the inside of Xiaomi CC9 PRO is not a conventional three-stage layout. The large amount of space on the left side left a five-shot lens module, and the border side key opening slotted portion increases the bracket protection, which can play a certain closed effect, dust and anti-splash. The NFC coil and a large-area thermal graphite are stacked above the battery.
Be
You can see the internal structure, the motherboard and the battery are left and right. The sub-board is located in the upper right side of the body, and is connected to the motherboard with the FPC. The lower right is equivalent 1CC's large volume sound cavity, and the external fraction is doubled. Right 5260mAh large capacity battery estimates half of the body inside the body, and is secured with easy access to the middle frame.
Be
Removing the rear camera protecting the cover to see "true" of 100 million pixels, the most pronounced is undoubtedly the middle huge one million pixel super clear main photo. The laser focus module is integrated on the lens cover, which is connected to the motherboard with the FPC. Laser focus not only enhances dark light focus speed, but also assists in judging the environment AWB, allowing photo of white balance to be more close to the human eye.
Be
According to the instructions, slowly tear the torn tear post to separate the battery. The stack is placed in a new generation of ultra-thin screens under the battery. The optical fingerprints under the past screen must be placed with the battery to a certain extent limit the capacity of the battery. The world's first ultra-thin screen optic fingerprint is used on Xiaomi CC9 Pro, which is extremely small in Z-axis space, and does not crowd the battery space, and can be placed with battery stack, and the battery capacity is greater.
On the other hand, there is no need to place the battery, and the fingerprint identification area has more choice space, which can be placed in a place where it is. In the past, in order to guarantee how much the battery space is used, the fingerprint module needs to be as close as possible to the bottom position, which is not enough to use it.
In addition, Xiaomi CC9 PRO adds the Battery Sense battery monitoring circuit on the battery, which can accurately monitor the voltage of the battery, avoid the error brought by the battery protection circuit impedance, and increase the charging efficiency while safer.
Be
The world's first ultra-thin screen optical fingerprint recognition module has a thickness of about 0.3mm, thinner than the 1 angle coin. By adopting a new microlens + micro-tight technology, the integration of the collapse of the collapse scheme and the lens scheme. The microscope is integrated over each of each quadruple hole. After obtaining a rich fingerprint information through the microscope, after the light enters the microphone, the interference light in other directions will be aligned with the straight hole, the final fingerprint mold The group receives sufficient incentation, high signal-to-noise ratio, and referring to fingerprint information. Not only is the quality, but the ability to identify unlocks, but also strong anti-interference ability. The unlocked success rate in an adverse environment such as outdoor strong light, low temperature and no finger is greatly improved.
Be
The main board of the motherboard is the camera module. First, 100 million pixels ultra-clear lens is Xiaomi combined with Samsung custom HMX, support optical anti-shake, 7P lens design of mobile phones, and enjoy the version of 8P. It also supports pixel 4 in 1 technique, and more sufficient in the dark, the night shot is also clear.
10x mixed zoom lens also supports OIS optical anti-shake to ensure good anti-shake effects in the distance of shooting. The 50mm classic portrait lens is a 12 million camera that is the same specification with Xiaomi 8, 1.4μm large pixel supports DUAL-PD dual-core focus.
Be
The motherboard uses the "L" shaped motherboard, the front side is mainly in RF chip and power management chip, and the back is released in high pass 730G SOC and memory flash stack. Xiaomi CC9 Pro supports multi-function NFC, which uses Sn 100T chips of Xiaomi 9/9 PRO. The new charge pump charging management chip is added, with MI-FC high-speed charging technology, allowing millet CC9 Pro's 30W fast flash charge to obtain a high-speed charging experience of 40W, 65 minutes, can be filled with 5260mAh large batteries.
Be
Be
The engineer has passed the new internal space layout, constantly trying to tun, put hundreds of pixels five-shot, 5260mAh large-capacity battery, NFC, and equivalent 1cc large volume external play chamber to integrate into the machine .
The above is "true" "true" in the middle of the millet CC9 PRO.
Our other product:
