Ivi K5 is the first naked eye 3D mobile phone, which not only has excellent design, but also excellent in hardware configuration, equipped with a 5.5-inch naked eye 3D screen, and independent GPU, enhanced naked eye 3D effect. Ivi K5 naked eye 3D mobile phone workmanship? Today we will disassemble IVVI K5.
IVvi K5 is not designed with a metal body, so dismantling is relatively easy, and the rear cover is bonded by double-sided adhesive and body, it can be separated. The IVVI K5 rear cover uses the ripple reflective effect of glory 8, using plastic materials, bringing lighter fuselage, and very beautiful.
After the rear cover is separated, you can see a cable connection body and back cover, this cable is the cable of the fingerprint recognition on the back cover.
The cable interface of the IVVI K5 motherboard has a metal sheet, which prevents the cable from loosening, small design to protect the stability of the mobile phone.
IVVI K5 uses the back fingerprint recognition, you can see the fingerprint recognition elements on the back cover.
The IVVI K5 rear cover covers the heat sink, the heat dissipation film can take the heat of the battery and the main board to help the mobile phone heat dissipation.
There is also a middle box fixed in the IVVI K5 fuselage, which can increase the structure stability of the phone.
There are some white parts in the box, which is the antenna of the phone, and there is an antenna in the upper and lower part of the middle frame.
The middle frame of the phone uses the screw to fix it on the body, and a lot of screws are used, and the fixation is quite stable.
After removing the screw, you can separate the phone's middle frame, and the box is also used.
The back of the middle frame is mainly some of the contacts of the antenna, as well as the outer planet of the mobile phone.
The outer planets and sound cavity of IVVI K5 are mounted in the lower part of the middle frame, which uses an integrated external sound cavity.
After removing the middle frame of your phone, you can see the PCB of your mobile phone, IVVI K5 uses a typical size PCB design, and is also a mature mobile phone design.
The small PCB below IVVI K5 is mainly responsible for connecting various interfaces and antennas, so design is relatively simple.
IVVI K5 uses a 3000mAh battery that provides excellent battery life.
There is a chip on the upper left corner of the mobile phone motherboard, which is the touch chip of the mobile phone screen, responsible for the touch control of the mobile phone screen.
After removing the PCB, you can see the metal box of the phone, which is mainly used to carry the screen, battery, PCB, and the like.
You can see silicone on the phone metal box. This is used to help the CPU heat dissipation, bring the calories of the CPU to the body of the phone.
The IVvi K5 is covered with a metal screen cover, which prevents the chip from being subjected to electromagnetic interference.
The back of the PCB is the CPU of the phone and the memory chip, and the SIM card slot of the phone.
The IVVI K5 has 2 cameras. The first camera is responsible for the camera, and the other camera is responsible for the operation of the mobile phone operation 3D content.
There is a total of 3 cameras on the IVVI K5 mobile phone, but the front two cameras are not double-time, but the eye tracking system requires a camera to assist.
IVVI K5 uses a UNAMIC MT6750 processor with 8 A53 cores, the core frequency asks 1.5GHz, has excellent performance, and IVVI K5 is equipped with independent GPUs, handed over 3D display to independent GPUs to mitigate the burden of the processor.
IVVI K5 uses HYNIX's shipping + flash particles, with 4GB of big fortune and 64GB of body storage.
IVvi K5 uses MT6176 RF chips, supports 4G networks for FDD and TDD, support dual carriers, providing high-speed network speeds.
Sky 77643 is a radio frequency amplifier, responsible for the transmitting and reception of the signal of the phone, supporting the full Netcom network.
Sky 77916 is also a radio frequency amplification chip, because the phone supports dual card dual standby, there is a need for another radio frequency amplifier.
Dismantle the whole family
IVVI K5 is equivalent to excellent workmanship, using a mature architecture, making mobile phones more stable, and also has a lot of heat dissipation design, allowing mobile phones to have a better heat dissipation. IVVI K5 is used by mainstream brand high quality chips, which also provides guarantees for mobile phone stability. IVVI K5 is the first naked eye 3D mobile phone in IVVI, and the work material reaches the level of mainstream, and the price of 2199 yuan is also worthwhile.
Our other product:
