How to use any speaker as a microphone

Step 1: Strip the XLR cable

How to use any speaker as a microphone

The first thing you need to do is to strip the XLR cable. Inside the cable, you should find a positive wire, a negative wire and a ground wire (the only wire without rubber. This wire will not be used."

Step 2: Connect Connect the XLR cable to the speaker

Now you need to connect the XLR cable to the speaker. This part is easy to weld and is optional.

Okay, so, depending on the speakers you are using, whether you need to disassemble the speakers.

(Instructions for speakers with cable clamps on the back)

1: Just connect the positive and negative wires on the back of the speaker

(Instructions for speakers without cord clamps)

1: If there is a wire out on the back of your speaker, you can cut it off, and then connect it to XLR

2: If the speaker has no wires, then you need to turn on the speaker, just loosen the screws a few times.

3: Once the speaker is turned on, you should see the back of the ACTUAL speaker. You will see positive and negative connectors on the speaker. Just connect the XLR to this port.

Our other product:

Professional lightning protection system for Tower	Professional FM Radio Station Equipment Package	FMUSER FU-1000C 1000W FM Transmitter With USB Audio Input Interface
FMUSER 200W FM Radio Broadcasting Package	Hotel IPTV Solution	FMUSER FSN-1000T V5.0 1KW FM Radio Broadcast Transmitter