3G-SDI HD digital video and analog audio optical transceiver (single fiber

3G-SDI HD digital video and analog audio optical transceiver (single fiber bidirection) 3G-SDI HD digital video and analog audio optical transceiver (single fiber two-way) model: DMB-TRX-S-FC-3G-W13 / W15 Product Features (1) Support 1 two-way 3G-SDI / HD-SDI / SDI / ASI Input / output, no manual selection (2) analog audio 20bit digital encoder (3) audio input port balancing / unbalance automatic conversion, ESD protection, use safer and reliable (4) complies with SMPTE424M, SMPTE297M, SMPTE305M, SMPTE310M Standard (5) Compliance with DVB-ASI (EN50083-9) standard (6) automatically adapt to SDI 143m, 177m, 270m, 360m, 540m, 1483.5m, transmission rate (7) input with automatic cable equilibrium, Compensation cable transmission loss (8) LED lamp design is perfect, easy to monitor equipment Working status (9) Lead-free environmental protection circuit board PCB design (10) PCB board adopts multi-layer design, circuit stable and reliable, signal transmission stability Reliable (11) all components include connectors, using international famous manufacturers, quality reliable (12) with aluminum material housing design, beautiful, light (13) dual switching power supply design, wide voltage range, power system long and reliable Working technical indicators 3G / HD / SD-SDI HD digital video input channel number 1 + 1 way loop (two-way) level. 1882.380MVP-P automatic cable balance. 1882.100M (2970MBPS) (Belden1694A cable). 1882.200m (1485Mbps (Belden1694A cable). 1882.350M (270MBPS) (Belden1694A cable) reflection loss. 1882.10db @ 2970MBPS impedance 75Ω interface BNC3G / HD / SD-SDI HD digital video output channel number 2 (two-way) level 800MVP-P ± 10% 3G-SDI rise / fall time. 1881.135ps @ 2970MbpsHD-SDI rising / drop time. 1881.270ps @ 1485MbPSSDI rise / fall time. 1881.0.6ns @ 270Mbps3g-SDI maximum jitter. 1881.0.0.2ui ( 134PS) @ 100khz<1.0ui (673ps) @ 10 Hzsdi maximum jitter. 1881.0.2UI (740PS) @ 10Hz<0.2UI (740PS) @ 1kHz impedance 75Ω interface BNC analog audio input channel number 2 (two-way) frequency band width 20 Hz [email protected] maximum level 17 .4VP-P (+ 18DBM) channel isolation. 1882.90db @ 1khz, >90db @ 20kHz resistor 600 ohm or high-resistance binder XLR card simulation audio output channel number 2 (two-way) frequency band width [email protected] DB maximum level 17.4 VP-P (+ 18dBM) signal-to-noise ratio. 1882.85dB (unloaded) Total harmonic distortion. 1881.0.2% channel isolation. 1882.90db @ 1kHz, >90db @ 20kHz delay match 2 degree amplitude Match ± 0.2dB resistance low blocking port XLR card physical parameter size (high x width x deep, mm mm) 44 × 433 × 340 (mm) dual power supply 130-260VAC, 50 / 60Hz power consumption. 1881.10W relative temperature 0- 50 degrees Celsius relative humidity 0-95% does not show LED status indicator power supply, light link state, video audio state light link parameter fiber mode single mode fiber number 1 fiber interface FC / PC single mode transmission distance 0-40 km