First, preface: standard double panel cool cold Supreme Mastercase H500M listing
In October 2017, it has launched a great favored H500P modeling chassis. The lead in the armor line is enhanced to improve the cleanliness of the system to the new level. On June 25, 2018, the new upgraded version of Mastercase H500M was officially released.
On the basis of H500P, MasterCase H500M retains many advantages of the predecessors, and has made a lot of optimization on the original shortcomings. The punching mesh is more smooth and beautiful, and the power supply warehouse has more convenient, standard. The glass is free to switch with the grid double panel, and also supports players to customize logo, so that the whole machine looks more personal.
MasterCase H500M upgrade is far more than these, please learn about this chassis along with our test.
The Mastercase H500M chassis parameters are as follows:
Second, the appearance: Details reflect the perfect powerful scalable ability
Two 200mm Argb fans are preset on the front.
It is standard with tempered glass and punching nets (left on the left side of the figure, the right side of the punch), according to the player preferences autonomously.
After replacing the front panel of the glass, the entire chassis is in addition to the bottom and back, and other four sides are tempered glass.
The chassis side cover uses a huge tempered glass panel, and the glass panel uses a metal edge design, which can effectively protect the glass from damage.
The tempered glass side paste, using a word type 90 ° unlocked design, is a common in the Master series chassis. With the tool card, you can unlock it, you can unlock it, unload the chassis cover. It should be noted that try to use the tool (for example, a coin) corresponding to the latch, otherwise, there will be traces of the pit drops.
The glass cover is also used in the top of the chassis, and there is a large metal heat dissipation hole on both sides.
2 200mm fans can be installed on top of the chassis, or 120mm, 140mm, 240mm, 280mm, 360mm, water-cooled installation.
The top large-scale metal heat-dissipating holes ensure the open air inner air in the chassis.
Top IO panel design is very technological. There is a 3.5mm headset microphone interface, 4 USB3.0 and 1 Type-C type USB3.1 interface. The RESET button can adjust or turn off the ArgB lamp.
The back of the chassis has seven PCI slots, and 2 PCI slots in the vertical direction are reserved. The PCI can utilize the Cool Supreme MasterCase series of graphics steering stents to achieve dual graphics card reverse installation.
4 strip rubber pads at the bottom of the chassis can ensure that the overall stability of the chassis can also function as a buffer.
The bottom power supply is installed at the air outlet, and the protection of the power supply is not bothered, and the dustproof network can be very easy to pull out.
The back preset 14cm chassis fan, the speed of 1200 rpm.
The front standard has 2 MF200R RGB fans, and the speed is 800 rpm. The front fan can radiate the airway of the entire chassis, even if the hard disk warehouse and power warehouse are not let go.
H500M maximum supports E-ATX specification motherboard, CPU heat sink is limited to 190mm, almost all of the top wind cooling radiator on the market, the graphics card is 412mm to eat various high-end graphics cards.
The H500M chassis is designed with a vertical graphics, which can be directly mounted on the bottom of the chassis via the PCIe terminal, in addition to avoiding the graphics karang, but also fully demonstrate your high-end graphics.
There is another point to note that if you want to install a hard drive, you need to open the right hard drive armor.
The power bin can customize the slogan, name or even logo, so that the whole machine looks more personal.
There are two 2.5-inch SSD brackets on the power mask.
Compared to the H500P to remove 2 armored armors of the power bin to install the power supply, H500P is very intimately designed with power warehouse slip. As long as the screws above the back power supply warehouse are unscrewed, the power is fixed on the baffle, gently drive the power supply into the power bin. The entire power store is about 30 cm long, and there is enough ribbon space after installed 20 cm power.
The H500M also created the graphics card support arm design. By adjusting the height of the support arm, you can steady your graphics card, and no longer have to worry about the high-end graphics to pull the PCB.
There are 2 2.5-inch SSD on the back of the chassis, and 3 armor baffles are also installed, making the back trace clean.
Opened 2 Plumbing Armor.
The fan controller can control the RGB lamp effect of the chassis and water-cooled fan after connecting the RETER line armor.
Attached to the box.
Eight stainless steel water-cooled fan screws in the box, no screwdriver can fix the cold row with the water-cooled fan.
Third, the installation map reward: the wire is clean and colorful ArgB lamp
The interior of the chassis, the trace is clean.
The back line is also impeccable.
The graphics card support has steadily hosted the GTX1080 Super Ice Dragon Edition.
The top is installed with cool G240 water-cooled radiators, the water-cooled fan at the top, cold row in the interior.
If you need to place the cold row with the water-cooled fan at the bottom, place it inside, install it in a normal manner, the heat sink of the motherboard power supply area will block the fan. So cooling developers don't have an idea of designing the installation of offset installation.
As long as the cold row screw is fixed in the place as shown in the figure, the motherboard heat sink can be avoided, and a large space is installed in various spaces, even if the thick cold row of 63mm can be easily installed! Give a cool R & D person to praise ^ _^.
When you don't open the RGB lamp, the whole machine is also very beautiful. The RGB button on the top I / O panel top I / O panel can be free to control the RGB light effect of the water-cooled fan and the chassis fan, but also directly close all RGB lights.
Top Ice G240 RGB lamp effect.
Front 2x200mm fan lamp effect.
The internal lamp effect of the chassis.
The above is the night boot renderings, and the whole chassis is very incomparable.
The above is a variety of lamp effects, Ice God G240 RGB water cooling and chassis fan lamp is perfectly integrated.
Fourth, Argb Light Effective Map Appreciation: Feel the jumping air light effect
V. Performance test: Double 20cm fan strong power machine low temperature and mute
The test platform is as follows:
Heat test:
The cooling capacity of the chassis is mainly due to whether the air in the chassis can quickly discharge the heat generated by the CPU and graphics card. We run civilized 6 AI test at 1080P to see the highest temperature of the CPU and graphics card. When the heat dissipation is tested, it is mounted to the inside of the chassis using a method of mounting a bias installation.
Thanks to the large metal heat dissipation holes on the H500M chassis, and the powerful air volume provided by 2 200mm fans. After running for half an hour, the entire chassis side cover temperature is very low, the CPU temperature is 53 degrees, the graphics temperature 65 Spend. Performance is very good.
Let's take a look at the CPU and Graphics Cards at the same time, how will the temperature of other accessories inside the chassis?
After the CPU and the graphics card are running for half an hour, it is benefited from the front double 20cm fan, and the whole machine is very cool. Three mechanical hard drive temperatures inside the chassis remain around 40 degrees, while CPUs and graphics temperature are only 74 degrees and 67 degrees, respectively.
Noise test:
Environmental noise 50 decibels.
2 200mm front fan speed is only 800 rpm, and the operating time is 52.3 decibels, only 2 decibels higher than the ambient noise.
The top water-cooled noise is also 52.3 decibels, very quiet.
Under high load, the top water-cooled fan noise is 59.6 decibels, which is also a quiet category.
Six, summary: comprehensive and perfect history
After a round of evaluation, the characteristics of the cool H500M are summarized as follows:
1, the workmanship is solid, the details are also facing, this is the best requirements for high-end chassis
2, so far, the cleaner chassis, H500M contains a total of 9 block armor, which increases the cleanliness of the system to the new level, open the left and right cover of the chassis, can't see a mess.
3, standard with glass front cover and metal network double panel, like color value, and users who pursue heat dissipation.
4, the mute effect is outstanding, the whole machine is running only 2 decibels higher than the ambient noise.
5, heat dissipation ability. Unlike other chassis, the H500M did not sacrifice the heat dissipation because of the pursuit of the value, and a large amount of heat dissipation holes on the top of the chassis were used for air exchange of water-cooled radiators. Its front double 200mm fan and large-area metal heat dissipation holes can rapidly discharge the internal heat of the chassis, effectively reduce the temperature of the power supply and the hard disk.
6, unparalleled Addressable RGB lamp effect. Especially after the ice god g240 RGB water-cooled heat absorber, the entire chassis exhibits an effective effect of flowing through, and the light is effective, there is currently no other chassis to go beyond it.
7, controllable light pollution. Press the RESET key to adjust a variety of lamps at will, in some unwanted occasions, and directly close all the RGB lights all over.
8. The first graphics card support arm design. You can adjust the graphics card at will, you don't have to worry about the high-end graphics card is too heavy and the PCB is not needed, nor does it need to buy the graphics card holder in the chassis, affect the overall beauty.
9, rich I / O interface. The front panel 4 USB3.0 and a USB3.1 TYPE-C interface, completely abandon the backward USB 2.0 interface.
10. Powerful water cooling support can support 2 360/280 water cooled, and also support DIY split water cooling. The original partial installation method of the top of the chassis is given the high-end player enough DIY space, which can be installed for various lengths and thickness, and the thick cold row of 63mm is not under words.
11, limited to 190 mm high CPU air-cooling radiator to support almost all high-end wind cooling radiators.
12, detachable dustproof net, dust-proof is easy to remove. This is also the standard of high-end chassis.
As the high-end products of cooling this year, MasterCase H500M performance is impressive, and the internal huge space can meet the players' various DIY and upgrade requirements, and the pursuit of color is high and guaranteed the heat dissipation performance of the whole machine. It is a very comprehensive chassis that is suitable for users who are not very nervous and budget.
Interested users can click here to enter the official flagship store of Cool Jingdong, read the full text
Our other product:
