Overview
The EMR electromagnetic radiation detector set is combined by two different frequency bands of low frequency and high frequencies. The frequency seamless is covered to 6.5g, which can fully meet the environment, occupational health, environmental evaluation, communication base stations, radio television, radar, power systems, Detection and Analysis of Different Application Scenes in New Energy Electric Vehicles, Product Electromagnetic Field Measurement. It can be measured on the boot, no need to set, easy to get up, easy to use.
Low frequency: use powerful microprocessive control technology, no need to switch the measurement range, the micro-electromagnetic field signal can be resolved in the environment, which will simultaneously display the electric field and magnetic field strength, no potential measurement avoids the human pair The effect of electric field measurement results. Functional diverse probes can achieve measurements of dynamic electromagnetic fields, static magnetic fields (generagnetic), electrostatic, body voltage, DC voltage. The device provides data recording function and analysis functions, using 1GB large data recording storage mode to perform field time data records on the electromagnetic field signal below 400kHz below the environment.
High frequency: equipped with a three-axis sensor probe after calibration optimization, ensuring maximum degrees of identity of measurements. The panel 5 button is designed, simple and clear, the probe uses the avionics to ensure safe and reliable use. High quality and light appearance, so that the outdoor long-term measurement work is not negligible. And each device comes with a calibration report.
Low frequency characteristics
Transfer (dynamic electromagnetic field measurement, static magnetic field measurement, electrostatic measurement, body voltage, DC measurement)
Power on the test, one-click operation is easy to use, 16Hz / 50Hz / 2kHz multi-filter selection
Composite probes, magnetic field isotropic (three-dimensional), electric field single-dimensional measurement (optional 3D)
Simultaneous measurement display electric field and magnetic field strength
Electric field measurement related to powerless potential and potential (fiber connection)
Magnetic field 1 NT and electric field 0.1 V / m resolution, no switching measurement range
Peak remained display and limited value alarm
1GB data logger for long-term and single point measurements, including software FM-DATA
Optional voltage output for connecting an oscilloscope and spectrum analyzer
High frequency characteristics
Impact or uniaxial (x / y / z) instantaneous field
Maximum value, RMS, time / spatial average
Optional unit, V / m, A / m, W / m2
Alarm function (custom alarm value)
Up to 20000 measurement data storage
5 button panel design, easy to use
7cm LCD LCD display (with backlight)
Fiber connection PC
Display date, time, temperature, battery charging state, etc.
9-point measurement mode (low frequency)
A very practical measurement method, long press the storage key to enter this function
This feature can be measured in a certain area into 9 points, 9 measured values simultaneously in a data set, using software to analyze the data set,
Software shows the electromagnetic field plane distribution map (9 points) of the region.
High frequency measurement
The high-frequency electromagnetic radiator is equipped with a high-performance three-axis probe to ensure the measurement of the sameness. Each device has a calibration report. The performance of the sensor is optimized to make it a good partner.
Our other product:
