◆ Introduction to the instrument
SMP160 hand-held wide-frequency electromagnetic radiation analyzer, which can measure an electromagnetic field generated by any field source connected to the frequency range supported by the handheld table probe. Such as mobile communication base stations, radio broadcasting and radar, high pressure substations, power lines, railways and industrial equipment.
Portable devices, easy to use, easy to start measurement. Have spectrum analysis / restroom measurement. SMP160 supports continuous sampling and automatic storage, and the device supports 4G large-capacity memory, depending on the time interval of the user, it can accommodate up to millions of level measurements.
◆ Instrument application
The SMP160 is a high-precision electromagnetic radiation analyzer for assessing a variety of electromagnetic environments and human security environments.
Satellite communication, TV antenna
Subway, tram, high-speed rail and other workplaces
Measurement and monitoring broadcast, aerospace, aerospace, navigation, military radar and other fields
Whether the field strength of communication base stations, radar, satellites, etc. is in line with safety standards
Long wave / medium wave / short wave broadcast launch tower, TV launch and other facilities
The environmental farm in the industrial sector is highly measured, such as welding equipment, high frequency heating, tempering, drying equipment
Measuring medical equipment, high frequency induction furnace, heat joining machine, to protect people using heat transfer therapy equipment to avoid radiation from electromagnetic waves
◆ Instrument applicable
Consumption frequency, RF environment monitoring
Electromagnetic field measurement referred to in public safety
Safety area assessment
Electromagnetic compatibility measurement
Various long waves, medium wave, short wave and microwave radiation
Environmental impact assessment, environmental investigation
Various targeted entrustment monitoring
Workplace electromagnetic radiation protection measurement
Measurement of TV, Computer, Microwave and Various High Strength Electromagnetic Field Working Environment
Microwave, electromagnetic cooker and other production enterprises product electromagnetic radiation detection
National defense electronic countermagnetic safety measurement
Aerospace equipment electromagnetic environment safety test
Airport Navigation Radar Electromagnetic Environment Measurement
University, research institute electromagnetic radiation research
Occupational health, disease prevention and control center electromagnetic radiation testing
Safety Production Supervision Administration Electromagnetic Radiation Management
Electromagnetic radiation and frequency monitoring of radio management committees
◆ Instrument characteristics
SMP160 integrated electromagnetic radiation analyzer is suitable for a variety of measurement environments, showing accurate, concise and rapid display results. Special
The point is as follows:
- Display and operation
Color anti-glare screen, even if you still read the measurement data even under strong light
Graphical user interface, big font display, easy reading
Update Rate: Chart 200 MS, Data 400 ms
- Result display and evaluation
Arithmetic average, sliding average and international standard average mode
Result Type (3D Outlet): Round Root (RMS), maximum, minimum average, X-axis value, Y-axis value, z-axis value, peak
Maximum, minimum, mean, RMS root values and spectrum can be displayed simultaneously under the same interface, while also displaying X / Y / Z three-axis value, peak
Unit selection: V / m, kV / m, A / m, UW / CM2, MW / CM2, W / M2 NT, UT, MT, T, MG; When the valve probe is used, the percentage is displayed.
Built-in GB 8702-2014 electromagnetic radiation control limit standard, real-time measurement results can be directly displayed as "percentage standard" "zero" start point icon feature: Select graphic display from 0 to max or minimum to maximum field strength over time Change display
- Measurement function
Auto Shutdown: After the measurement is over, the instrument can be automatically turned off.
Automatic identification of probe parameters
Built-in 4G large-capacity memory, can store million data
Multi-location space average: The space average of at least 48 places, stores each location measurement and total value, each point measurement, through the column chart of different colors, and before the end of the keyboard can be moved by the keyboard Data column
Single frequency point measurement: Users can customize the settings measured by the settings in the probe measurement frequency range (1Hz step)
Uniaxial conversion: can set the field strength value for measuring single axial (x / y / z)
Timed start function: Set the measurement start time. You can set a delay 24 hours. This function is also valid even if the host is turned off.
Wait before the start of the measurement: delay the measurement timing, so that people leave the measurement site, delay time can be customized
Save the final measurement screen: When this feature is turned on, the instrument will automatically intercept the final measurement. Image can be exported by SMP software
All measurement results of the instrument can be exported by SMP management software, stored in the form of an Excel form
Can use PC software for data management
Alarm function
Sound alarm function
User can customize the alarm limit
- operation
User custom settings for the use of instruments
Users can choose time shutdown to save power
Data storage and instruments carry
The host has built-in 4G large-capacity memory, which can be expanded according to the requirements, and the data storage is automatically completed after the measurement.
Hard carrier, small and small, easy to carry
◆ Instrument function overview
Follow the current standards of the People's Republic
Machine internal standard GB 8702-2014 (electromagnetic environment control limit)
Frequency range begins with 1 Hz, by equipped with different probes, fully meets frequencies of low frequency, high frequency, ultra-high frequency, microwave, radar and other frequencies
Chinese shows, color anti-glare screen, even if it is also easy to read the measurement results in strong light
Have spectrum analysis / restroom measurement, with FFT recording function
With timing shutdown function, the measurement end is automatically turned off, and the last measurement screen information function can be automatically saved.
Has a key screenshot / one-click returns the main interface, the measured value exceeds the sound alarm function
With self-calibration, automatic brightness adjustment, you can set screen brightness time
Have an arithmetic average, sliding average, international standard average function
Real-time monitoring and timing measurement (can be measured)
Average interval and recording interval adjustable
The real-time value, maximum value, minimum value, mean, X / Y / Z three-axis value, average time, average type, and spectrum, etc. can be displayed under the same interface.
Measuring data: Display the absolute value component of the three directions of X / Y / Z, the absolute value, the total value / real-time measurement value; can display the X / Y / Z three-directional component and the total percentage
Real-time value, arithmetic mean, sliding average, root value, maximum, minimum, etc.
Fiber / USB interface
Electromagnetic radiation special three-dimensional full electromagnetic field probe
The host automatically identifies the probe type and displays the probe serial number.
Professional after-sales service and instrument training
◆ Remote operation
Manage software remote operation
Connect by fiber / USB interface
Tablet control platform
Our other product:
