The first step in dismantling the glory back from the beginning of the V8, the only "breakthrough" in the signal overflow location of the camera position, this position is covered with a film, dismantling is to get this film apart.
Using a heat gun to heat the film glory back V8, the use of tools to make the film and the fuselage separated.
After complete separation of the film can be seen that the body has three screws, which is three screws the back cover and the phone's body fixing screws, so the next step is to these three screws removed.
After removal of the screw slot on the back of the phone needs to be removed so that it can be separated from the fuselage.
V8 glory of the screen using a snap cover fixed structure after the phone is metal, so the use of simple tools can make the screen and back cover completely separated.
After complete separation of the fuselage and the rear cover can see the internal glory V8, and V8 glory interior design can be seen quite neat, there is a cable connection between the cover and the body, this cable is the fingerprint recognition row line.
V8 glory all cables which are fixed to a metal plate, which effectively prevents loose cable.
The cable after removal of the cover can be completely separated from the back cover, the cover metal glory V8 integral molding process, the back cover mainly mobile phone antenna and fingerprint module.
V8 glory back using fingerprint identification, can provide very high speed and accurate fingerprint recognition, fingerprint recognition is now more mainstream configurations.
Most glory V8 body occupied by the battery, the two upper and lower classic PCB design, the above playing board PCB of the mobile phone, the following small PCB is a PCB connector, two PCB using two cable connector.
V8 glory on a small PCB is mainly USB type-C interface, in addition is the phone's loud speaker, there are dozens of mobile phone vibration motor.
V8 glory of putting speakers and sound chamber with integrated design, which can simplify putting the phone's design, reduce design costs.
V8 glory ripped out after a small PCB can see the USB type-C interface package rubber ring, can be protected interfaces, some of the details of the deal V8 glory of still in place.
The glory of the V8 has a large capacity battery, body installed capacity of the battery by a sufficient position, glory V8 battery capacity of 3500mAh, support fast charge can provide decent battery life performance.
Board covered with a shield of glory V8 can be seen covered with the dense member, and the connector above the PCB, board materials work very well.
The phone can be seen after the removal of the main board of the phone in block, with a silicone grease can be seen in the position of the motherboard CPU block, this may be the phone's body heat to be dissipated mobile CPU.
The front of the PCB shield apart, you can see the front of the main PCB are some of the RF chip, as well as Bluetooth wifi and so little chip.
The back of the PCB is not the main shield on the handset CPU, memory, and a baseband chip, mobile CPU and memory chips, to be used directly as a cell phone in block shield.
Glory V8 using Hass Kirin 955 (Version entire network), the processor core has four A72 and A53 core 4, the core frequency of 2.5GHz A72, V8 glory 4GB of RAM, CPU and memory chips using double package.
V8 glory of Samsung's memory chip, the chip has a capacity of 64GB (Netcom full version).
Glory V8 supports entire network, but the integrated baseband Kirin 950 does not support the CDMA network, CDMA require plug tether of a VIA chip.
SKY77597-11 is a new RF amplifier, responsible for processing the RF signal is amplified.
Huawei Hass Hi6362 RF RF transceiver chip, the mobile phone is responsible for transmission and reception signal processing.
altek6610 is a separate camera ISP chip, is responsible for shooting two cameras arithmetic operations on the glory V8.
VIA plug V8 glory of CDMA baseband, but also a FC7712 RF chip responsible for handling phone CDMA signal.
Dual 12 million pixel camera V8 glory of a camera is responsible for recording the color of the subject, and the other one is responsible for recording information in black and white, through ISP operations combined into one picture, the other is provided with a front camera 8 million pixels.
Through the glory V8 dismantling can see this phone in work materials is very good, not only has dual-camera configuration, but also has excellent hardware configuration, not only can shoot great pictures, but also bring outstanding performance, as glory V-series flagship product, the glory V8 flagship phone has owned workmanship and configuration, and phone number details of the deal is still in place, this phone work with the material worthy of the price of the party itself.
Related reading:
Martial arts world but not fast breaking - Glory Play 5X play a new height
Godson's deep understanding: "haste makes waste" this truth, it took 14 years to understand
Our other product:
